Predator Helios 300 PH315-52 Display Problem

2»

Answers

  • In this case, the ideal is to wait for the technician's response.

    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • Aathif_Mahir
    Aathif_Mahir Member Posts: 78 Devotee WiFi Icon
    In this case, the ideal is to wait for the technician's response.

    Sure thing, Will get back to you on a update on this issue once we done with a Display Replacement from Acer
  • StevenGen
    StevenGen ACE Posts: 12,459 Trailblazer
    edited June 2022
    Have you disassembled the display yet?

    Nope, I didn't

    Just as an addition and as its been mentioned above and as where the M.2 SDD slots are on the PH315-52 are, as its populated by allot of sensitive circuitries, you never ever touch and/or open a laptop especially (where you make starlight contact with circuitries components as soon as you open the laptop) unless you wear an anti static wrist band nulling all static that can be transferred onto these circuitries and also always and the first thing that you do before you add/remove any components is to disconnect the battery first,

    The OEM LED screen fitted to your PH315-52 is the "BOE NV156FHM-N4K (2.6mm) (40pin) (300nits) - Frame Rate: 60-144Hz - Acer P/N: KL.1560E.016" and the appropriate eDP cable is the "LCD EDP CABLE 40PIN - FOR BOE PANEL - Acer part #: 50.Q5MN4.011" as this is the only screen and eDP cable that has the 60-144Hz refresher rate and the appropriate eDP cable that Acer fits for your laptop.




     




  • Aathif_Mahir
    Aathif_Mahir Member Posts: 78 Devotee WiFi Icon
    StevenGen said:
    Have you disassembled the display yet?

    Nope, I didn't

    Just as an addition and as its been mentioned above and as where the M.2 SDD slots are on the PH315-52 are, as its populated by allot of sensitive circuitries, you never ever touch and/or open a laptop especially (where you make starlight contact with circuitries components as soon as you open the laptop) unless you wear an anti static wrist band nulling all static that can be transferred onto these circuitries and also always and the first thing that you do before you add/remove any components is to disconnect the battery first,

    The OEM LED screen fitted to your PH315-52 is the "BOE NV156FHM-N4K (2.6mm) (40pin) (300nits) - Frame Rate: 60-144Hz - Acer P/N: KL.1560E.016" and the appropriate eDP cable is the "LCD EDP CABLE 40PIN - FOR BOE PANEL - Acer part #: 50.Q5MN4.011" as this is the only screen and eDP cable that has the 60-144Hz refresher rate and the appropriate eDP cable that Acer fits for your laptop.




     




    It's still under warranty, therefore I didn't intended to open up the display and also Acer agreed to replace the screen with new unit and they already applied for new screen and waiting for it's arrival. That's true I guess, opening up and just unplugging the battery doing the service not a proper procedure but that's to blame the Acer Technicians who did the same. And they never bothered to properly root the cables after cleaning the fan as well. I guess that's why they are paying for it by replacing a new display