fps dips and overheating

GAMING6698

Arao31 said:

I've just looked at my ram and it says its dram frecuency is 1330.1 mhz, does it afect my gaming experience...I asked in the Attention Center of Acer, they said I cannot repaste but can change the ram

You didn't ask about gpu / CPU temperature in service center?

Arao31

GAMING6698 said:

Arao31 said:

I've just looked at my ram and it says its dram frecuency is 1330.1 mhz, does it afect my gaming experience...I asked in the Attention Center of Acer, they said I cannot repaste but can change the ram

You didn't ask about gpu / CPU temperature in service center?

Yes, I asked, they said it was okay for it to go that up, I just fresh installed Windows and I hope it works

GAMING6698

Arao31 said:

GAMING6698 said:

Arao31 said:

I've just looked at my ram and it says its dram frecuency is 1330.1 mhz, does it afect my gaming experience...I asked in the Attention Center of Acer, they said I cannot repaste but can change the ram

You didn't ask about gpu / CPU temperature in service center?

Yes, I asked, they said it was okay for it to go that up, I just fresh installed Windows and I hope it works

No,90+C harm your system component.
You need to do manually repasting. repasting is easy check if there is any seal or sticker in back of your laptop on the screw.If you don’t have a sticker saying “Warranty void if removed” on the back or you are outside of warranty then you can repaste yourself. Use Grizzly Kryonaut and follow this video
https://youtu.be/0vfoUkIazNA

GAMING6698

Only do if you don't have sticker 

Arao31

GAMING6698 said:

Arao31 said:

GAMING6698 said:

Arao31 said:

I've just looked at my ram and it says its dram frecuency is 1330.1 mhz, does it afect my gaming experience...I asked in the Attention Center of Acer, they said I cannot repaste but can change the ram

You didn't ask about gpu / CPU temperature in service center?

Yes, I asked, they said it was okay for it to go that up, I just fresh installed Windows and I hope it works

No,90+C harm your system component.
You need to do manually repasting. repasting is easy check if there is any seal or sticker in back of your laptop on the screw.If you don’t have a sticker saying “Warranty void if removed” on the back or you are outside of warranty then you can repaste yourself. Use Grizzly Kryonaut and follow this video
https://youtu.be/0vfoUkIazNA

I'm going to do so, but I'll pay someone to do it 'cause I don't wanna break anything...Although it could void the warranty

GAMING6698

Arao31 said:

GAMING6698 said:

Arao31 said:

GAMING6698 said:

Arao31 said:

I've just looked at my ram and it says its dram frecuency is 1330.1 mhz, does it afect my gaming experience...I asked in the Attention Center of Acer, they said I cannot repaste but can change the ram

You didn't ask about gpu / CPU temperature in service center?

Yes, I asked, they said it was okay for it to go that up, I just fresh installed Windows and I hope it works

No,90+C harm your system component.
You need to do manually repasting. repasting is easy check if there is any seal or sticker in back of your laptop on the screw.If you don’t have a sticker saying “Warranty void if removed” on the back or you are outside of warranty then you can repaste yourself. Use Grizzly Kryonaut and follow this video
https://youtu.be/0vfoUkIazNA

I'm going to do so, but I'll pay someone to do it 'cause I don't wanna break anything...Although it could void the warranty

Is service centre near to your home? If yes try them to do 

Click yes if you answered your question 

andylb

Incidentally your RAM speed is not 1333 mhz, you have to multiply it by 2. So your RAM Is 2666 mhz. 1333 mhz RAM doesn't exist

Arao31

GAMING6698 said:

Arao31 said:

GAMING6698 said:

Arao31 said:

GAMING6698 said:

Arao31 said:

I've just looked at my ram and it says its dram frecuency is 1330.1 mhz, does it afect my gaming experience...I asked in the Attention Center of Acer, they said I cannot repaste but can change the ram

You didn't ask about gpu / CPU temperature in service center?

Yes, I asked, they said it was okay for it to go that up, I just fresh installed Windows and I hope it works

No,90+C harm your system component.
You need to do manually repasting. repasting is easy check if there is any seal or sticker in back of your laptop on the screw.If you don’t have a sticker saying “Warranty void if removed” on the back or you are outside of warranty then you can repaste yourself. Use Grizzly Kryonaut and follow this video
https://youtu.be/0vfoUkIazNA

I'm going to do so, but I'll pay someone to do it 'cause I don't wanna break anything...Although it could void the warranty

Is service centre near to your home? If yes try them to do 

Click yes if you answered your question 

no, it is not, in Colombia there is just one in Bogotá

Arao31

andylb said:

Incidentally your RAM speed is not 1333 mhz, you have to multiply it by 2. So your RAM Is 2666 mhz. 1333 mhz RAM doesn't exist

Okay, thanks for clarifying.

GAMING6698

Arao31 said:

andylb said:

Incidentally your RAM speed is not 1333 mhz, you have to multiply it by 2. So your RAM Is 2666 mhz. 1333 mhz RAM doesn't exist

Okay, thanks for clarifying.

Is there is seal or sticker in back on the top of screw?

Arao31

GAMING6698 said:

Arao31 said:

andylb said:

Incidentally your RAM speed is not 1333 mhz, you have to multiply it by 2. So your RAM Is 2666 mhz. 1333 mhz RAM doesn't exist

Okay, thanks for clarifying.

Is there is seal or sticker in back on the top of screw?

no, there is no sticker

GAMING6698

Arao31 said:

GAMING6698 said:

Arao31 said:

andylb said:

Incidentally your RAM speed is not 1333 mhz, you have to multiply it by 2. So your RAM Is 2666 mhz. 1333 mhz RAM doesn't exist

Okay, thanks for clarifying.

Is there is seal or sticker in back on the top of screw?

no, there is no sticker

That's great, so you do thermal pastig.but be careful Use Grizzly Kryonaut and follow this video
https://youtu.be/0vfoUkIazNA

Grizzly kryonaut is best you can buy from Amazon 

Arao31

GAMING6698 said:

Arao31 said:

GAMING6698 said:

Arao31 said:

andylb said:

Incidentally your RAM speed is not 1333 mhz, you have to multiply it by 2. So your RAM Is 2666 mhz. 1333 mhz RAM doesn't exist

Okay, thanks for clarifying.

Is there is seal or sticker in back on the top of screw?

no, there is no sticker

That's great, so you do thermal pastig.but be careful Use Grizzly Kryonaut and follow this video
https://youtu.be/0vfoUkIazNA

Grizzly kryonaut is best you can buy from Amazon 

I'll do it, hope it works! I'll tell you how it goes and if it works

GAMING6698

Arao31 said:

GAMING6698 said:

Arao31 said:

GAMING6698 said:

Arao31 said:

andylb said:

Incidentally your RAM speed is not 1333 mhz, you have to multiply it by 2. So your RAM Is 2666 mhz. 1333 mhz RAM doesn't exist

Okay, thanks for clarifying.

Is there is seal or sticker in back on the top of screw?

no, there is no sticker

That's great, so you do thermal pastig.but be careful Use Grizzly Kryonaut and follow this video
https://youtu.be/0vfoUkIazNA

Grizzly kryonaut is best you can buy from Amazon 

I'll do it, hope it works! I'll tell you how it goes and if it works

It will work and very effective.
When your issue solve click yes.

Arao31

GAMING6698 said:

Arao31 said:

GAMING6698 said:

Arao31 said:

GAMING6698 said:

Arao31 said:

andylb said:

Incidentally your RAM speed is not 1333 mhz, you have to multiply it by 2. So your RAM Is 2666 mhz. 1333 mhz RAM doesn't exist

Okay, thanks for clarifying.

Is there is seal or sticker in back on the top of screw?

no, there is no sticker

That's great, so you do thermal pastig.but be careful Use Grizzly Kryonaut and follow this video
https://youtu.be/0vfoUkIazNA

Grizzly kryonaut is best you can buy from Amazon 

I'll do it, hope it works! I'll tell you how it goes and if it works

It will work and very effective.
When your issue solve click yes.

Hi, I just managed to get someone it man working in this selfisolation time, today was the day I've changed the thermal paste of my laptop, all in all the one game I'm playing right now seems to run just fine, but I would like to know about some app or program that allows me to run a thermal throttling test. Also I feel that even so I have done the thermal pasting, the climate of the zone I live in may have some influence in the overall temps of my pc.

batmalin

I have written in wrong topic, sorry

Arao31

those are the temps, is it good to have all those spikes (I'm guessing no) 

GAMING6698

@Arao31
Yes,climate influence in temperature.i live in india now in summer season my temperature going to 85°C.
Just before playing open nitrosense turn on coolboost and set fan speed max.