acer predator g9 593 irst problem

Amortis
Amortis Member Posts: 19 Troubleshooter
edited November 2023 in 2018 Archives
I clicked something in irst and from non raid ssd +hdd , became I think raid 1 I cant use my hdd I cant retrieve I tried many things from forum. I don't have achi mode or I can access raid in bios. I tried some things in the end repair mode 3-4 reset... I want to fix it but I cant I don't know how . I really need help . some threads missing basic steps for me to do it at least correct. I tried with raid tool kit aint working  or am doing it wrong. pus irst support aint helping and I can even touch to swap to available or spare or w.e and yes I run as admin

Best Answers

Answers

  • Commodore_1995#
    Commodore_1995# ACE Posts: 98,349 Trailblazer
    Answer ✓
    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • Amortis
    Amortis Member Posts: 19 Troubleshooter
    iron fly way aint working for me. command promt don't find cd raid tool... dunno what am doing wrong
  • I suggest you send a private message to fellow iron-fly and mihirganeshjoshi! They can help you better than I do! However I believe you should install the irst 15.2!
    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • Amortis
    Amortis Member Posts: 19 Troubleshooter
    Thank you for the reply and suggestion i ll try what u said and sent and i ll keep u post thank you
  • brummyfan2
    brummyfan2 ACE Posts: 28,667 Trailblazer
    edited November 2018
    Hi @Amortis
    You can break the RAID setup by backing up the OS on to a HDD and recover it again using Macrium Reflect free program, please follow the steps:
    1.Download and install Macrium reflect.
    2.Run it as admin and create a bootable USB with it.
    3.Connect an external HDD with a SATA cable, backup the OS on to the HDD.
    4.Connect the USB recovery disk you created with Macrium, go to BIOS, move to Boot tab and make the USB disk as the first boot device, click F10 to save and exit.
    5.Recover the image from the external HDD on to your 256GB SSD.
    6.Format the HDD, create a new volume and assign a letter.
    https://www.macrium.com/reflectfree
    https://www.howtogeek.com/howto/7363/macrium-reflect-is-a-free-and-easy-to-use-backup-utility/


  • Amortis
    Amortis Member Posts: 19 Troubleshooter
    Thank you for the reply and suggestion i ll try what u said and sent and i ll keep u post thank you
  • Amortis
    Amortis Member Posts: 19 Troubleshooter
    OK UPDATE after downloading irst 15.2 and raid tool I can see my hard drive but in partitions now whats going? I made it online the disk I format the part I could and made f: partition but still I have D:/237gb of 1tb used as mirror 
  • Amortis
    Amortis Member Posts: 19 Troubleshooter
    Shall I mark it as spare?

  • brummyfan2
    brummyfan2 ACE Posts: 28,667 Trailblazer
    edited November 2018 Answer ✓
    Hi,
    You can right click the 931GB drive partitions and delete them, then create a new volume and give a drive letter, but make sure you can boot with the SSD alone, if you want take out the HDD and boot only with the SSD, after checking that the laptop boots with the SSD alone, you can install the SSD and delete the partitions as I have mentioned earlier.

  • Amortis
    Amortis Member Posts: 19 Troubleshooter
    I did that it boot and connect hdd I delete the two partitions and stuck
     again
  • Amortis
    Amortis Member Posts: 19 Troubleshooter

    and again I lost drives from my computer beside ssd
  • Amortis
    Amortis Member Posts: 19 Troubleshooter
    edited November 2018
    and I cant do anything  with the disk
  • Hi,
    Download and install Minitool partition wizard Free program, run it and you can delete 100MB and 1GB partitions, then in Disk management, you can right click Unallocated partition, create a new volume and give it a letter.
    https://www.partitionwizard.com/free-partition-manager.html
    https://www.minitool.com/help-pw/delete-partition.html
  • Amortis
    Amortis Member Posts: 19 Troubleshooter
    aomei did it thank you all for now 
  • Amortis said:
    aomei did it thank you all for now 
    Hi,
    Glad you got it sorted :)
  • Glad you solved the problem!
    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • Amortis
    Amortis Member Posts: 19 Troubleshooter
    edited November 2018
    Hi @Amortis
    You can break the RAID setup by backing up the OS on to a HDD and recover it again using Macrium Reflect free program, please follow the steps:
    1.Download and install Macrium reflect.
    2.Run it as admin and create a bootable USB with it.
    3.Connect an external HDD with a SATA cable, backup the OS on to the HDD.
    4.Connect the USB recovery disk you created with Macrium, go to BIOS, move to Boot tab and make the USB disk as the first boot device, click F10 to save and exit.
    5.Recover the image from the external HDD on to your 256GB SSD.
    6.Format the HDD, create a new volume and assign a letter.
    https://www.macrium.com/reflectfree
    https://www.howtogeek.com/howto/7363/macrium-reflect-is-a-free-and-easy-to-use-backup-utility/


    I ll upgrade to 512 ssd nvme and hdd to ssd 1tb. How to clone each hard disk? I ll go with macrium?  I do have usb 3.1 external hdd . do you have any detail on the steps? Ll i avoid reinstall everything? I can make recovey usb stick 64gb to back up OS disk
  • Amortis
    Amortis Member Posts: 19 Troubleshooter
    I mean am confused with the way. I clone to external hdd the internal hdd and then i install for example ssd on sata .then i clone again external to the new ssd? 
    The nvme Os disk wanna be how ill clone?or I ll just go threw recovery usb