JOIN OUR RANKS
Sign up for an Acer ID and get exclusive access to deals and the Predator Den community, where you can ask and answer questions about gaming and gear.
Aspire E15 E5-553-T2XN
suly0718
Member Posts: 2
can anyone tell me why my Laptop constantly drops the Wifi and then says that there isnt any available Wifi?
0
Best Answer
-
doughjohn
Member Posts: 353 Mr. Fixit 
Hi
No not really.
To stay connected I set a lomg lease time for mine.
IPv4 Address. . . . . . . . . . . : 192.168.0.13(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 27 August 2017 08:54:16
Lease Expires . . . . . . . . . . : 03 September 2017 08:54:22
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1I have set other things like a IP allocation (so there is no clash or conflict), named the Gateway and DNS server. Control Panel Network and Sharing Centre, and look at Properties.
It is on a low usage channel to avoid signal swamping, I set the Beacon Interval to 100, transmit power to 5 Highest and a few other things, like not letting it go into power saving mode.
But your case may be different. Not seeing any WiFi locally suggests it is powered down, hence the Power Saving option. I can type a command to find other information. Other commands to try and reset the connection. But they may not be appropriate.
If in doubt please ask.
0
Who's Online936
Acer-Carsten
Acer-Laura
Acer-Monica
Aniketsingh302000
Asdv1234
billsey
brummyfan2
Cyriix
DEIM0S
James4Joe
Mando_ayyy
Peppi2411
RashedRasuli
Unreserved23
vlado22
William_mk2
Join in, share your experience!
Assistance by Acer
FAQ & Answers
Hi
No not really.
To stay connected I set a lomg lease time for mine.
IPv4 Address. . . . . . . . . . . : 192.168.0.13(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 27 August 2017 08:54:16
Lease Expires . . . . . . . . . . : 03 September 2017 08:54:22
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
I have set other things like a IP allocation (so there is no clash or conflict), named the Gateway and DNS server. Control Panel Network and Sharing Centre, and look at Properties.
It is on a low usage channel to avoid signal swamping, I set the Beacon Interval to 100, transmit power to 5 Highest and a few other things, like not letting it go into power saving mode.
But your case may be different. Not seeing any WiFi locally suggests it is powered down, hence the Power Saving option. I can type a command to find other information. Other commands to try and reset the connection. But they may not be appropriate.
If in doubt please ask.
thank you for the information i will try it