Best Of
Re: Where can I download BIOS 2.21 for the Aspire V3-571G?
Перейдите на HelpDrivers, так как у них доступно 103 файла для ноутбука Acer Aspire V3-571G. Ниже указана версия BIOS 2.21, чтобы вам было проще. Удачи и надеюсь, это поможет вам.
BIOS version 2.21 for the V3-571G
Go to HelpDrivers as they have available 103 files for Acer Aspire V3-571G laptop. Below is the bios version 2.21 for you to make it easier. Good luck and hope this helps you out
Если это отвечает на ваш вопрос и решает вашу проблему, пожалуйста, нажмите «Да» или «Нравится», если вам полезен мой ответ 👍
Re: Acer Aspire E360 Desktop Do you know if there is any recovery disk online?
Kindly check the below link :
Acer Recovery Media - Acer Community
Click on "Yes" if it answers your question or Click on "Like" if you find my answer useful
Diya1811
Re: Predator Sense missing after fresh Windows 11 says "Model not supported"
There are no solutions for fixing these issues with either PS or NS, try the fix "What to Do if NitroSense Software Will Not Start" listed below and see if that will apply for the PredatorSense on your laptop
Or see if this fix also applies Nitrosense problem in Nitro V fixed by cmd prompt to PredatorSense
If you are still experiencing problems launching NitroSense, please contact Acer Support in your region.
If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍
Re: Predator Sense missing after fresh Windows 11 says "Model not supported"
After a fresh installation of Windows 11, PredatorSense can fail to install or say "Model not supported" because the clean OS install often removes crucial Acer-specific software and registry entries. The standard installer from Acer's website may not work because it checks for these pre-existing components.
Primary solution: Use the UWP folder installer
This method bypasses the standard setup program and is frequently reported to work by Acer users.
Download the correct version. Go to the Acer support website, search for your exact Predator model, and download the latest PredatorSense package for Windows 11.
Extract the files. Unpack the contents of the downloaded ZIP file to a new folder on your desktop.
Find the UWP folder. In the extracted files, locate the folder named PredatorSenseUWP or UWP.
Install the APPX file. Open the UWP folder and double-click the .appx or .appxbundle file inside. This should install the app from the Microsoft Store.
Install the service runtime. Go back to the main extracted folder, find the Plugs folder, and run the SSCERuntime.exe or a similar runtime file.
Run the main setup. After installing the UWP app and runtime, go back to the main folder and run the standard Setup.exe file. It should now install correctly without the error.
Restart your PC. Reboot your computer to ensure all services start correctly.
-----------------------------------------
If this answers your question & solved your query please "Click on Like" and then Yes "Answered".
Axxo
Re: Predator Sense missing after fresh Windows 11 says "Model not supported"
I saved this post long ago for this situation. Follow the solution he provided:
Your APPXBUNDLE files folder likely in your laptop predator sense folder somewhere. Find it and follow link
Re: Planning to buy a new laptop - Acer Predator Helios Neo 16S AI vs Alienware i7/i9, looking for community feedback
I have non-s version of latest Neo series, which is PHN16-73-9128. Having U9 275hx, rtx 5060. Flawless, having so much above average performance figures for each component. I like IPS rather than OLED because, it's better for eye health. And the contrast ratio on these new IPS panels are good enough and very small backlight bleed for an IPS panel IMHO. And you can use variable refresh rate between 60hz and 240hz with non-s version, which is good for battery life which you won't have with s version and although non-s version a little bit bulkier than the s version, it outperfoms the s version in terms of component performance ratings.
gntr
Re: Brand New Predator Helios 16s restarting randomly - Kernel Power Event ID 41
Did this issue resolve after doing what suggested in reply ?
Because right now i am facing same issue with my Brand new Laptop Acer predator helios neo 16s ai rtx 5060.
Log Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 11-10-2025 11:24:00
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (70368744177664),(2)
User: SYSTEM
Computer: MIRAJBEAST
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331c3b3a-2005-44c2-ac5e-77220c37d6b4}" />
<EventID>41</EventID>
<Version>10</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000400000000002</Keywords>
<TimeCreated SystemTime="2025-10-11T05:54:00.9325587Z" />
<EventRecordID>15292</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>MIRAJBEAST</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BugcheckCode">275</Data>
<Data Name="BugcheckParameter1">0x19</Data>
<Data Name="BugcheckParameter2">0x2</Data>
<Data Name="BugcheckParameter3">0x10de</Data>
<Data Name="BugcheckParameter4">0x2d59</Data>
<Data Name="SleepInProgress">0</Data>
<Data Name="PowerButtonTimestamp">0</Data>
<Data Name="BootAppStatus">0</Data>
<Data Name="Checkpoint">0</Data>
<Data Name="ConnectedStandbyInProgress">true</Data>
<Data Name="SystemSleepTransitionsToOn">0</Data>
<Data Name="CsEntryScenarioInstanceId">1</Data>
<Data Name="BugcheckInfoFromEFI">false</Data>
<Data Name="CheckpointStatus">0</Data>
<Data Name="CsEntryScenarioInstanceIdV2">1</Data>
<Data Name="LongPowerButtonPressDetected">false</Data>
<Data Name="LidReliability">false</Data>
<Data Name="InputSuppressionState">0</Data>
<Data Name="PowerButtonSuppressionState">0</Data>
<Data Name="LidState">1</Data>
<Data Name="WHEABootErrorCount">0</Data>
</EventData>
</Event>
