paulorcsjr Troubleshooter

a busca por vulnerabilidades web são infinitas ja passaram-se 8 meses e eu não sai da introdução.

eu não entendo pq meu interesse é ter apenas linux rodando nesse notebook, qual a chance de uma atualizaçao do windows me possibilitar isso. eu não consigo abrir a partição que está com windows 10 instalado. com parrot funcionando mesmo escolhendo com F12 me possibilita continuar estudando Etical Hacking no hackthebox.com,…

Vc tem sempre uma resposta pra acer pensar que seus clientes estão satisfeitos?

estou com win10 e parrot no hdd na BIOS ele não mostra os boots corretamente tem duas posições mas ele não mostra a posição 1 somente a posição 2 fica vizivel independente do sistema escolhido e o windows é o boot |||||||||H2O e o parrot é 2S|||||||||||O ambos viziveis apenas qndo colocados no posição 2 ai hje não tava…

é que eu to usando parrot(linux) olha o que aparece buscando firmwares instalados sudo apt list firmware Listing... Done alsa-firmware-loaders/now 1.2.2-1 amd64 [installed,local] bluez-firmware/now 1.2-7~bpo11+1 all [installed,local] firmware-amd-graphics/now 20210818-1 all [installed,local] firmware-atheros/now 20210818-1…

Processor Information Socket Designation: UC1 Type: Central Processor Family: Core i3 Manufacturer: Intel(R) Corporation ID: E5 06 07 00 FF FB EB BF Signature: Type 0, Family 6, Model 126, Stepping 5

after this problem i just delete all old partitions on hdd but windows (that i dont open and even try to start anymore) and make 1 swap partition/ 1 efi fat32 partition/ 1 ext4 root partition and it works i deserve acer give me a linux notebook and a full degree about ethical hacking to pay all headaches... thank you up…

I formated parrot partition yesterday Couse was Very slow and thought that config above was ok but now is saying missing firmware and not starting...

Look for ssd nvme problem that seems was solved If was your case. If helps my system have a windows but grub cant see him so he was never initialized since i install parrot. I have 1 partition fat32 for both Efi and one separated for grub. Was The only way that make parrot run good luuck

Hello @BrainBlaze try to make the system sleep mode and awake up i did this by typing systemctl suspend on terminal in the linux penbootwaking up the system must be able to see you SSD good luck

o brother storm largou o conhecimento e vazou... qndo eu conseguir fazer aquilo vai dar certo... mas eu estou com o hdd velho usando o parrot, mas o efi do windows que aparecia na tela do grub sumiu

how can i get a job on acer?

Hello again now im installing ARCH Linux to make the @Bullet_Storm tip i have been trying to apply that code to make system sleep and wake before initram Laptop/Acer - ArchWiki (archlinux.org) on Arch installation i defined efi system(fat32)/ linux root system(ext4)/ swap following Installation guide - ArchWiki…

im studying on hackthebox.com whit parrot HTB for now (lot of free and good content to ethical hacking learning) so have no patience enough to try boot windows again lets see how long my ACER will tolerates this configuration thank you all

i read something about boot repair

yes like i saidchoosing (efi win boot) nothing happensrestoring default settings on secureboot we get failed bootload screen

to change the boot file we need to activate secure bootchoosing (efi win boot) nothing happensrestoring default settings on secureboot we get failed bootload screen on parrot installation i did grub partition and efi partition the start screen is grub i dont know nothing about iti wonder if grub is growing up above the efi…

now i could install parrot linux OS but cant start windows 10the boot section on bios is bugged i tried enabling secureboot choosing windows boot but the windows cannot start nowon parrot instalation i created 1 swap partition (sda3) 1 efi partition fat32 (sda6) 1 grub partition ext4 (sda4) 1 ext4 parrot partition (sda5)…

i just instaled the win10 on my older hdd, its not toasted like i tought. seems that INITRAMSF is realy that firmware problem not abble to run linux sistems like somebody already said on this forum. anyway i ll try to install linux again and look to this option, maybe if i do the separated partitions for linux instalation 

and but maybe i can be wrong couse i already had a kali linux in an older hdd and after 1 month it showed that INITRAMSF error and i thought the hdd was toasted but maybe it is fine and this is the system refusing the linux OS by nature. i ll try to format the old hd whit win7 first to see if it was toasted or not