Twingo86 Devotee

What for bullshite is this ? his laptop can run windows 11 easely, even if it shipped with 10 it can handle 11 (11 is a update of windows 10 anyway). My old laptop (Acer G9-793 can even run windows 11 while it is not even "official supported" and yes i did get all the updates!). This sounds like a hardware failure to me,…

That does not work, i have a G9-793. I don't like it that acer ships bios parts locked. I decide what i want to do with my laptop as i have purchased for it. Alternative way key combo ?

Maybe use duck tape ?

Anyone has a key combo to unlock this menu ? There are several methods for other acer laptops but none have worked on my Acer Predator G9-793 I cant even install Pop! OS on my nvme because the bios has set that drive into raid mode.

Well, the left and right speaker are working well but still there is sound coming from the subwoofer. Is this normal ?

Ubuntu forum says 0x1b should be internal speakers, instead of internal speaker (back). Both works but i really want to know what the difference is. https://ubuntuforums.org/showthread.php?t=2357875&s=2cd9aeac21ef7c98f05f9a7683f0800b&p=13732474#post13732474

I had issues with sound, everything came out of the subwoofer (mono). The other 2 speakers didn't work. With this trick it did!

I was thinking about how i screwed the m2 to the adapter and i thought holy *****...i screwed it wrong lol...i can use 1 plate without all other plates to fill up. Above post can be ignored in the how to lol

Where did you see me write that i have the pro one ? Thats also states in post 1 that i just have a 980 nvme And if you place the second nvme upside down the pins dont match...which result in wrong voltage. You cant place a m2 upside down like i did. That caused a chip to melt/burn and the whole card was very very hot. I…

Well the self made brick works perfectly See here -> https://community.acer.com/en/discussion/comment/1033247/#Comment_1033247

I made my own bricker from a AliExpress 1. I ordered this one: https://a.aliexpress.com/_vsD6LT 2. I cut it down in 3 pieces 3. The piece where the screw needs to be attached to the m2 card needs to be screwed upside down.4. The other pieces you can attach with tape and also screw them at the same time as the m2.5. Screw…

Thanks for the answer, good to know and will keep this in mind. Laptop works fine btw 😎👍🏻

Hmmm okey, didnt get black screens when i swapped the nvme for a new one, added a new sata ssd and swapped the 2,5 inch for a ssd.

So today i just bought 2 extra ram second hand. I installed them correctly, fired up the laptop on battery and i got a black screen. So i turned off the laptop, took out 1 ram module to check if it worked...still a black screen. I again turned off the laptop and removed the ram module and installed the other one. Black…

I did and cut it into pieces, that one is not good for the sata 3. So now a piece is keeping the sata 3 card in place temporarly I ordered a new one and will apply it later Also my mobo only has con5101, see picture in post 1 😃

Hehe oke thanks for the tip

Hi brummyfan2, i never run out of memory. It's just that i saw those 2 slots empty and want to fill it with 2 new memory.

Does not matter anymore, i guess we both misunderstood eachother. My question was in point 2 if the nvme card would fit in the second slot and work with sata speed. "2. If i am not wrong 1 port is nvme and the second one uses sata 3 ? it will work but with half speed ?" I now learned it's not possible and will kill the…

From post 1 picture 1 and 2...Did you used 2 plates ??? why not just 1 ?

Is said in post 1 i am thinking to buy 2 samsung 980 1 tb nvme cards to install them in my laptop. Those cards are gen 3 You said it would work on the second port but with sata 3 speed. The nvme port worked fine with the samsung card but the sata port with nvme killed the second card, yes the chip burned and smelled bad. I…