Comentarios
-
Muchas gracias por todo amigo! Ya he restablecido todo y empieza a sentirse como antes! Te lo agradezco de corazon. Diego!
-
Hello there again! Another problem that I ran into was that now can't boot the problem in Uefi mode although Legacy is working. Was wondering if this is a big deal for daily use of the laptop as I might keep the legacymode instead. The SSD was bought from Pc.componentes.com, a tech store here in Spain. Hope you have a nice…
-
Last Update: I bought a new SSD for the computer, and install W10 again on it and worked perfectly. Was a clean install so I need to config all again but that's a pain that I'm concerned about. The HDD finally was intact so I didn't lose much info and docs, tomorrow I'll try and find whats wrong with my last SSD. Thanks a…
-
Ya probé a reconectar el SSD pero tampoco funcionó. Mañana probaré a instalar W10 en el HDD, aunque no tengo mucha idea de como hacerlo, porque la instalación tiene que ser desde 0,no? Algún Consejo? Muchas gracias por todo! !!
-
Después de restablecer los valores con F9 y cerrar con F10, sigue el mismo problema Non Bootable Device en Uefi y Legacy. Empiezo a pensar que los discos están quemados o que tienen algún problema. Estoy mirando ssd nuevos compatibles con M2 tanto con SATA como con Nvme con factor de 2280, tienes alguna sugerencia? Si…
-
It seems that neither the HDD nor the SSD showed up in the boot manager
-
Sry about the duplicate messages! :s
-
yes, even if i use the command in main tab, nothing happens/changes
-
Yes, even in the main tab nothing changes when i press the command.
-
Yes, nothing change even in the main and the others tabs
-
I've set a simple password and tried to boot in UEFI and with the secure boot disable and still can't find the option in the main tab.
-
However I notice that there's no boot priority order in UEFI...
-
Nothings happens even in UEFI
-
Can't modify the AHCI value. The Cntrl S command don't do nothing in none of the tabs of the bios.
-
There's an option called SATA mode: AHCI in the main tab without having to press Crtl+S. Still not working. Thanks for the effort
-
UEFI, sorry
-
Have to say that the system won't boot even with WIFI instead of Legacy
-
[NS editado por moderadora - Acer-Karp]
-
I disconnect and reconnect both of my disk again and the message keeps appearing.
-
Ive just open the laptop and check the hard drive and the connection of the solid state and both seems right and they appear in the Bios. However the SSD in which I had the W10, is not working or being read by the laptop. I'll try to replace it for a new one, but don't know if acer will supply another licence of W10 or how…
