Darkrott Troubleshooter

Wouldn't mine just under clock to 2400mhz?

these work?

I have 2 16gb soDimm modules from my nitro 5. I think they are 3200mhz though. They work or no?

Is it also possible to UPGRADE the fan, not just replace it, seeing how there's only one? More velocity?

Sorry, I meant for the CPU and GPU. They are smaller.

Appear to be the smallest in the m series.

The red IR5 one is dead. The others are not. I'll check the others like you mentioned. I traced the 19v from the DC input, found a few 17v and 15v near the input, are the 17v normal?

I've narrowed it to this area(red IR5 bad ) in the battery section, possibly a capacitor. My question is where do the battery charging rail(red IR5) and normal operating and battery lights (blue IR5 good) connect/split? You know what I mean? What direction from DC plug do they split, or does the power rail go to the…

Couldn't find

No 19's and 3's and 5's on this one.

My board is a 55, not a 54, very different. Tips are appreciated, and I'm using my laptop to learn the basics of power rails. I wouldn't fix it if I didn't feel comfortable. Was hoping for a simple capacitor. Figured I'd learn before the professional repaired it.

Is it possible this could be bad (uf3)? Residue and readings are off. Plug out( .793 no beep white dot pin), plug in( .162 and constant beep). And yeah, I've seen a lot of that guys videos...that's crazy!!!!

Get a c port hub with HDMI. It works. I have one. Use the Nvidia settings.