rfo056

Tinkerer

Comments

  • It has been fun project. Don’t think I’m going to be able o find graphic card under 6” length an less than 30w power currently I figure with help of pcpartpicker.com I’m at 130w when I put the i5 7400 cpu that adds another 30w. Was unable to find the 7400T chip which would have kept power down more just found out today the…
  • So shots of final projection completion. Still trying to find add in graphic card to fit, it tight fit. I picked a I5 7400 processor (best my budget would allow. Can go up to i5 7700 K but then that's a 91w processor instead of the 65w I'm using. Still working within limits of the original power supply. Once I find the…
  • So here a shot of the two housings Top is final of part using my old housing, bottom is of the new USB part I bought off Ebay. You can see in bottom part has screw mounting on sides, my part had just one from underside
  • Progress Update After hacking up the front connections housing to try and insert the USB3 Cable / Connector part (photos above). I found a better solution on Ebay "Acer ATC-780A-UR12 Desktop USB Audio Cardreader Board Panel DA1371100 XC-RTS5143" This involved taking it apart to extract the USB/Headphone connector part to…
  • ok, can't thank you enough. Just know that they used that chassis several times. I got very aggressive in my searching an just like they say EBAY has everything. I found it. See attached photo. Lol, now I have a collection of parts I have no idea when I'll use. Bought a complete USB 2 setup just incase my hacking up mine…
    in AXC-603G Comment by rfo056 March 2020
  • Good, but what I was hoping for is if there are any that I could look for on Ebay or buy from acer that would fit that chassis? I have already started a cut up my existing housing to modify. However have reached the outcome, the usb 3 connector at motherboard to dual at the faceplate cable is coming out of Hong Kong an…
    in AXC-603G Comment by rfo056 March 2020
  • Update ! AXC-603G Power Supply 24 pin connecter tested out to match the standard pin out voltages for ATX motherboards. Post this as I couldn't find it in my searches here
  • Good answer. This morning I committed to finding out. I have a tower case in a box and was going to use it as a way out if the motherboard, cpu and ram just ordered didn't work out. Weds next week is the big day. Attached is what I'm using bought a MSI H110i Pro board form factor Mini Itx. Has 1 x PCIe 3.0 x16 but I can't…
  • ok found it hard to believe but after a lot of searching an reading. I know believe that it could be possible to have a pci connector for a specific purpose. Thanks for your prompt answer even if it wasn't what I was wanting to hear. So now see if I can find a new board to fit this case.
  • Here's some info that I have from a program called HardwareInfo . These are the two connections in the photo I posted. I'm trying to figure out what connects i.e. Ribbon cable or sata edge connector ? MINI1 --------------------------------------------------------------------- Slot Designation: MINI1 Slot Type: PCI Express…
Avatar