miguelarrieta

Tinkerer

Comments

  • Yes, Y checked your previous tip. But at BootOptions Menu You only can change the Boot Priority Order and Enable/Disable Quiet Boot there you can press Enter to chose EFI as the last option and Hard Disk as 1st. But it did't work for 64-bit Then by Pressing Enter on EFI Boot Drive Priority You can see this screen but there…
  • I found this Acer support page, this model is very similar to Z1650 https://www.acer.com/ac/es/MX/content/support-product/3533 They have the same Chipset model NM10 Express https://www.acer.com/datasheets/2012/4871/Z1650/PW.SJUP8.001.html https://www.acer.com/datasheets/2011/4871/Z291G/PQ.VD6P8.004.html The only difference…
  • Yes, I disabled Quiet Boot. The only difference is that on booting it shows more info, this is the screen I finally formated HDD, re flashed BIOS to P01.A1 version and installed original Windows 7 starter 32 bits to match factory default (except BIOS) but RAM is not used at all. I will keep looking for P01.A0 for this Part…
  • Hello, Yes, I tried to install Windows 8.1 64-bit, even after deleting all partitions and formatting hdd, I tried using USB and DVD but there is an error because BIOS is reporting that CPU is only 32 bit I also tried to install Linux but the error is always about CPU reported by BIOS, because this Intel Atom D2500…
  • That's just the problem. I cannot see any way to enable legacy mode instead of uefi in this BIOS version. I can only chose first boot option hdd before EFI but it did't work for 64bit. I wonder if there is a way to unhide advanced option like legacy mode or CSM because Supervisor password didn't make any difference. Thanks…
  • Hello, The SNID IS: XXXXXXXXXXXXXX [Edited to remove the inappropriate or personal content - Acer-David] Model Name: AZ1650 Part Number: PW.SJUP8.001 This model came with Windows 7 Starter 32 bit version preinstalled and 2 GB of RAM, but after original hdd failed, I upgraded RAM to 6 GB and a put new hdd, then installed…
  • Ya intenté con el DVD de Windows 7 pero me aparece el mismo error pero en inglés Descargué un ISO con las versiones de 32 y 64 bits y lo único que me permite es una instalación limpia de 32 bit. Liberé espacio de la partición D para instalar Win7 starter y enciende pero sólo es útil 3 de los 6 Gigas de RAM que están…
  • I set the Supervisor Password, but I can NOT find Launch CSM option neither Disable Secure boot or change to Legacy mode instead of UEFI I also tried Setup and System Security Option and even to press alt+F1 or ctrl+F1 in order to see if some hidden option were shown but nothing. I also tried to upgrade OS to win 8 to…
  • Thanks again for your quick reply. I have NOT created a password, Not on previous BIOS version neither in the new one. This is the default BootOptions picture Then, I made this change to test But it didn’t work Even in any combination with other options like AHCI/IDE and Intel XD Bit protection Enabled/Disabled I found…
  • Hello again. I took some pictures from BIOS, those are the Default settings: MAIN Advanced Advanced > Miscellaneous Advamced > Advanced Chipset Conf. Advanced > Integrated Peripherals The other screens are about Power Security BootOptions, Sve & Exit I just tried several changes, but anyone solved the problem because I can…
  • Thank you for your quick reply. I took a picture before updating to verify that my Bios was out of date [Edited the image to remove inappropriate or personal content - Acer-David] I downloaded BIOS version P01.A1 for Windows 8 64-bit to perform the update. After BIOS was flashed, I verified the new version and loaded the…
Avatar