Misio77 Troubleshooter

Comments

  • I know it is specific to acer v3-571G, at most I threw away 6 euros..
  • i saw it is 2 way, but the vendor who sold it to me claims it does not support full hd. However, for now the cheapest solution is to try with the cable I mentioned earlier (DC02C004600 / 50.RZGN2.002) and then if it doesn't work ask for the panel replacement. The edid procedure i have doubts, i think resetting the bios is…
  • excludes that the edp cable is 2-lane and that it supports full hd.
  • EDP cable 1 or 2 lane 
  • The seller where I bought this cable told me that the V5WE2_EDp_CABLE DC02001OH10 REV: 2.0 cable does not support full hd Seller: New message from: notebook spare parts eng (51,810) Dear customer, this is an acer EDP cable unfortunately does not support FHD resolution so we exclude both 2-way. So currently, instead of…
  • It's my idea to try to remove the CMOS battery, but it's just an idea ... It bothers me to spend + 140euro for another panel ... Now I do this, I buy this cable: DC02C004600 / 50.RZGN2.002, if it doesn't work I contact the seller and I tell him that the panel doesn't work.
  • Panel AUO B156HTN03.1 you mean this panel: https://www.panelook.com/B156HTN03.1_AUO_15.6_LCM_parameter_20475.html
  • Researching it found that this cable (V5WE2_EDp_CABLE DC02001OH10 REV: 2.0) is two-way, so most likely it is the panel that is not working.
  • already tried both old cable and new cable, the old panel works, however when I bought the new cable 50.M8EN2.004 and asked the seller if it was ok with full hd panel the seller said no. For this I would like to try to use the cable (50.RZGN2.002 / DC02C004600)
  • Procedure edid provided to me by the merchant: Static Reset: Display Connected to the flat cable only, that is, without screws and only resting on the top cover of the notebook, then uninstall the battery with it also the power supply, after which keep the power button pressed for 40 seconds, then restart the notebook and…
  • Procedure edid: Static Reset: Display Connected to the flat cable only, that is, without screws and only resting on the top cover of the notebook, then uninstall the battery with it also the power supply, after which keep the power button pressed for 40 seconds, then restart the notebook and check if the operation was…
  • Update:I contacted the seller and he told me that he sends me a procedure to do and he was recommended to follow it step by step, when i receive the procedure I will share it with you hoping it will work.
  • Thank you JackE, in the meantime I had also purchased the non-touch edp cable above and it does not work anyway, today I will try to contact the seller.
  • So i have to buy another panel?
Avatar