Mode

Guidelines for safe battery usage

Member Posts: 2 New User
Hello
The user manual says:
Guidelines for safe battery usage
WarningWhen using a charging cart or a small space to simultaneously chargeor operate multiple devices , the area must be well- ventilated and thetemperature kept between 0 °C (32 °F) to 35 °C (95 °F) and batterycharging must be stopped when 100% capacity is reached. Continuous charging can cause deformation or damage to the battery/device.

Precautions when charging batteriesThe useful lifespan of a battery is adversely affected by the followingbehavior:• Constantly charging the battery/device when already at full capacity.• Charging the battery/device at temperatures above 35 °C (95 °F) orbelow 0 °C (32 °F).To prevent damage, follow these precautions:• Stop charging the battery once it reaches 100% capacity; regularlyor frequently charging a fully charged battery for an extended periodof time may cause battery deformation or damage. We recommendthat you recharge the device when the battery level drops below70% capacity.• Do not charge battery in temperatures above 35 °C (95 °F) or below 0 °C (32 °F). Charging in abnormally high or abnormally low temperatures can cause battery deformation or damage.

Is this product really so primitive that there is a need to keep an eye on the battery when is charging? What if I turn on charging in the evening when the laptop turned off? The battery will be destroyed ???

Join in, share your experience!

It looks like you're new here. Sign in or register to get started.
Sign-in / Register

Answers

  • ACE Posts: 3,043 Pathfinder
    They are generic warnings for LiPo batteries, when it hits 100% it will stop shoving charge into the battery :)
  • Member Posts: 2 New User
    Last week (Saturday) I asked this question to official Acer support. I have just been answered:
    Thank you for your message. We recommend working on the power supply and using the battery whenever necessary, remembering to discharge the battery below 30% as rarely as possible.

  • ACE Posts: 3,043 Pathfinder
    Yarp :) , you can keep an eye on the battery health / cycles as well by using
    powercfg /batteryreport

    Most of the time the warning are there as they have to be there! The controller on the battery stops things like overcharging, over temp, or weird output nowadays

Join in, share your experience!

It looks like you're new here. Sign in or register to get started.
Sign-in / Register

Join in, share your experience!

It looks like you're new here. Sign in or register to get started.
Sign-in / Register