Monitor driver doesn't work, can't attach to stand - KA272BI

t8769
t8769 Member Posts: 23 Troubleshooter
Downloaded the driver for this monitor but there is nothing to install.
No setup - nothing.
Just KA272, KA272 and ka272 files but no Setup!





Thanks



Best Answer

  • christy1
    christy1 Member Posts: 1,619 Community Aficionado WiFi Icon
    Answer ✓
    t8769 said:
    Thanks but the picture is bad, the screen does not look good. 
    When I plug in the screen usually it updates automatically but this does not happen. 
    I can see that  there is something wrong. I assumed this was the driver. 
    I have tried updating and downloading the driver but nothing works. 
    What can I do. The picture is not good on my PC. 
    Thanks




    Remove all the cables ,including the power cable. press and hold the power button on the monitor for 30sec. connect the power code alone and then connect the input source. turn on the monitor 1st and then restart the computer.
    Accept if its Helpful.   B)

Answers

  • christy1
    christy1 Member Posts: 1,619 Community Aficionado WiFi Icon
    t8769
    enter the snid and find the user manual in acer site below. monitors are plug and play devices. they dont need a driver until the default one is been corrupted. its just like tv. connect it to the computer and turn on the computer and it shows the display. monitor has to be on 1st and then the computer. good luck :) 

    https://www.manua.ls/acer/ka272/manual?p=18
    https://www.acer.com/ac/en/US/content/drivers
    Accept if its Helpful.   B)
  • t8769
    t8769 Member Posts: 23 Troubleshooter
    edited March 2021
    Thanks but the picture is bad, the screen does not look good. 
    When I plug in the screen usually it updates automatically but this does not happen. 
    I can see that  there is something wrong. I assumed this was the driver. 
    I have tried updating and downloading the driver but nothing works. 
    What can I do. The picture is not good on my PC. 
    Thanks


  • t8769
    t8769 Member Posts: 23 Troubleshooter
    Maybe it is OK.

    I think it is just the mode I am in.

    Thanks



  • christy1
    christy1 Member Posts: 1,619 Community Aficionado WiFi Icon
    Answer ✓
    t8769 said:
    Thanks but the picture is bad, the screen does not look good. 
    When I plug in the screen usually it updates automatically but this does not happen. 
    I can see that  there is something wrong. I assumed this was the driver. 
    I have tried updating and downloading the driver but nothing works. 
    What can I do. The picture is not good on my PC. 
    Thanks




    Remove all the cables ,including the power cable. press and hold the power button on the monitor for 30sec. connect the power code alone and then connect the input source. turn on the monitor 1st and then restart the computer.
    Accept if its Helpful.   B)
This discussion has been closed.