Monitor acer ed273awidpx wild flickers of the screen (backlight)

HornetFly
HornetFly Member Posts: 2 New User
in Monitors
People tell me please, can who faced my problem. Monitor acer ed273awidpx 27 144 hz (ED273 Abidpx the same monitor only black). Gigabyte gtx 1070 g1 gaming video card.In General, the problem is that when you turn on g-sync, there are wild flickers of the screen (backlight) both on the desktop when idle and in games at any fps. The monitor officially supports nvidia c freesync. I contacted NVIDIA technical support, but they could not recommend anything else besides how to remove the driver via DDU and buy DP v 1.4.
What did I do to defeat this disease:
1. Removed firewood through DDU and put clean (last)
 2. Bought DP 1.4, the same flicker.
3. through CRU changed the limits up and down (nothing changes)
4. in the NVIDIA settings, I locked the fps to 138, turned on and off the vertical, low-latency mode on,off, ultra., changed the power supply mode ( does not help ).
5. Switched DP to all 3 slots in the video card.
6. Reinstalled Windows.
7. Changed the ending.
8. Put the native driver from ACER.
9. Checked this Monitor with another videocard, gtx 1050ti.
10. Changed the full-screen mode and the window mode to full-screen mode.
11.The monitor itself has piratical all that is possible, there is no effect. The technology itself works perfectly.In games, everything becomes very smooth,very pleasant to play,but these flickers that appear everywhere and always just kill my brain. Perhaps there is some toggle switch that needs to be switched and everything will work as it should? Thank you in advance for the hint.

Answers

  • ratapof
    ratapof Member Posts: 1 New User
    edited February 2021
    Hello, i have the exact same monitor and i am experiencing the exact same problem. and i also tried eveything above. still experiencing the same problem.
    The only thing that seems to have helped for me is reducing the VRR range with CRU from 48-144 to 90-144. but there is still noticible and quite anoying flickering
  • HornetFly
    HornetFly Member Posts: 2 New User
    Hello, I tried changing it to a range of 90-144, the flickering becomes less, but they remain. G-sync starts to work much worse, there is a tiring. You can check in the G-SYNC Pendulum Demo.

Categories