Acer Spin 1 sp111-333 (N18h1) screw

maraxion
maraxion Member Posts: 11

Tinkerer

Can someone please give me the specs on the backpanel and also hinge screw size on this laptop?

Answers

  • billsey
    billsey ACE Posts: 34,645 Trailblazer
    edited January 2021
    SP111-33 maybe? On that model there are two different sized screws holding the bottom cover in place, four M2x3.5mm and six M2x5.7mm (my guess is 6mm will work). The Acer part number for te bottom case itself is: 60.H0UN8.001. The hinge screws are M2x3.5mm.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • maraxion
    maraxion Member Posts: 11

    Tinkerer

    edited January 2021
    billsey said:
    SP111-33 maybe? On that model there are two different sized screws holding the bottom cover in place, four M2x3.5mm and six M2x5.7mm (my guess is 6mm will work). The Acer part number for te bottom case itself is: 60.H0UN8.001. The hinge screws are M2x3.5mm.

    Thanks, seems there are a lot of different answers, iv seen people say M2.5 aswel, and some say all are 5mm long.
    Is there any chance there is a common lengt screw that would fit all? like 4 or 5 mm? Dont have it yet so cant measure myself :)
  • billsey
    billsey ACE Posts: 34,645 Trailblazer
    Nope, the screw lengths are determines by the physical placement of the nuts embedded in the plastic of the top of the case. You can, however, buy a laptop screw kit that has a few of each commonly sized screw and that usually gives you enough to do the job. If your model is the SP111-33 then those sizes should be correct. M2 and M2.5 are the most common sizes, with lengths varying to match the model.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.