Stuck on automatic repair loop Acer aspire es1-533 series

Morgs1234
Morgs1234 Member Posts: 2 New User
edited October 2023 in 2020 Archives
I dont have any knowledge at all , I went to reset my laptop it said there was a failure in resetting and when it went to load up it's been stuck in the preparing automatic repair screen for hours 

My laptop is a windows 10
Acer aspire es1-533 series 
Model number n16c1

Can anyone help 

Answers

  • JackE
    JackE ACE Posts: 44,891 Trailblazer
    Press and hold the power button for 5 seconds till the machine shuts off. Then remove the charger. Then insert a paperclip into the battery reset pinhole on the bottom for about 30 seconds. Then reconnect the charger. Wait till the battery charge LED turns from steady orange to steady blue. Then try to turn the machine on again. Jack E/NJ

    Jack E/NJ

  • Morgs1234
    Morgs1234 Member Posts: 2 New User
    JackE said:
    Press and hold the power button for 5 seconds till the machine shuts off. Then remove the charger. Then insert a paperclip into the battery reset pinhole on the bottom for about 30 seconds. Then reconnect the charger. Wait till the battery charge LED turns from steady orange to steady blue. Then try to turn the machine on again. Jack E/NJ
    Hi jack I just tried this and it went back to the same screen after about a minute
  • Jason_Bourne
    Jason_Bourne Member Posts: 113 Skilled Fixer WiFi Icon
    You have a USB pendrive? Make a bootable disk out of it and see if you can reinstall windows.
  • JackE
    JackE ACE Posts: 44,891 Trailblazer
    Press and hold the power button till the machine shuts off. About 5 seconds. Then turn the machine back on and IMMEDIATELY press and hold the ALT key while tapping the F10 key. A recovery screen should appear to allow you to either refresh the system while trying to save your personal files or reset to a factory fresh condition. Jack E/NJ

    Jack E/NJ