Veriton X2631G disable bright Network LED or enable sleep mode?

RM1953
RM1953 Member Posts: 17 Troubleshooter
edited March 1 in 2020 Archives
The bright blue flashing LED on the front bezel signifying cabled network activity is intrusive at night. Is there a way to disable this without covering the front panel? There is no option in the Windows 10 Pro menu to enable sleep mode either, only "shut down or restart" are shown in the Windows menu. Can sleep mode be enabled and would this prevent the network light from flashing continuously?

Answers

  • billsey
    billsey ACE Posts: 34,216 Trailblazer
    It looks like the activity LED is going to be on for all sleeps modes:
    That table also implies that sleep modes are available, so likely you just have the wrong parameters set in power options.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • RM1953
    RM1953 Member Posts: 17 Troubleshooter
    Thanks billsey,

    I think those options are only available on laptops? All I can see in Power Options in Control Panel on my Windows 10 Pro desktop is a sub menu to choose or customise a power plan. There is no tick option to amend shutdown settings or buttons?
  • RM1953
    RM1953 Member Posts: 17 Troubleshooter
    Found some sleep settings that can be configured in power plan and chose to enter sleep after 15 minutes. This seems to shut down the PC instead of sleep as it can only be brought back to life by pressing the on/off switch on the front panel when it seems to just restart from scratch?
    Moving the mouse or keying into the keyboard does nothing?
  • billsey
    billsey ACE Posts: 34,216 Trailblazer
    Those are all available to any Windows 10 computer, though some are not enabled by default. From my image you can see that I was in the old Control Panel Power Options, not the Settings; System; Power and Sleep. You can get there from the new side of things by choosing Additional Power Settings, then Change what the power buttons do.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • RM1953
    RM1953 Member Posts: 17 Troubleshooter
    Thanks again, perhaps it depends on what version of W10 is running as I can see some options in the old control panel but not the same as your screenshot. Hibernate is available but there is no option for sleep?
    The W10 version is 2004 Windows 10 Pro OS build 19041.572 with Windows Feature Experience Pack 120.2212.31.0
  • RM1953
    RM1953 Member Posts: 17 Troubleshooter
    It seems to have been a graphics driver issue. I updated the generic Microsoft driver with an Intel version and all seems OK now. 
  • billsey
    billsey ACE Posts: 34,216 Trailblazer
    Weird... :)
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • RM1953
    RM1953 Member Posts: 17 Troubleshooter
    Yes I couldn’t see a link between graphics and power issues but its fairly well documented on the web.