Added SSD to Aspire E 15-575-33BM . But now HDD is not accessible

Moose1ok
Moose1ok Member Posts: 6

Tinkerer

edited October 2023 in 2020 Archives
I followed instructions on how to add an SSD to my Aspire E 15-575-33BM and it seemed to work fine. The SSD is proving faster speed , which is great. The problem is that the original HDD , does not show up or is accessible. And that is where most of my data is. 

Answers

  • brummyfan2
    brummyfan2 ACE Posts: 28,469 Trailblazer
    Hi,
    Could you please post the Disk management picture, how did you transfer the OS to new SSD?
  • Moose1ok
    Moose1ok Member Posts: 6

    Tinkerer

    The HDD drive does appear on the BIOS boot menu, but it does not show up under file manager once windows is up

  • Moose1ok
    Moose1ok Member Posts: 6

    Tinkerer

    Here are a couple of screen shots.
  • Moose1ok
    Moose1ok Member Posts: 6

    Tinkerer

    Here is a screen shot . You can see it shows the new SSD but not the original HDD
  • Moose1ok
    Moose1ok Member Posts: 6

    Tinkerer

    Here is a screen shot from the BIOS at boot time.
  • brummyfan2
    brummyfan2 ACE Posts: 28,469 Trailblazer
    Hi,
    Right click Start(Windows logo in the far left corner), select Disk Management and post the snip of it like mine.

  • southleft
    southleft Member Posts: 12

    Tinkerer

    One reason it may not show up in the usual way is that the old drive has been disabled in the system BIOS/UEFI. Consult your instruction manual for which key to press during startup to enter the BIOS/UEFI setup screen. In there you can check if the missing drive is enabled or disabled.
    If you can't fix it you may wish to remove the old drive and connect it to a different computer using an external case with USB cable (cost around $10) and try to access/offload/copy your data. If that's successful you could then re-format the old drive and copy all your data back onto it and restore it into the original computer.
  • Moose1ok
    Moose1ok Member Posts: 6

    Tinkerer

    I entered the BIOS/UEFI setup screen, but I don;t see any option on how to enable or disable the missing drive