SSD problems in Nitro 5 AN515-51

bmarcosps
bmarcosps Member Posts: 3 New User
edited December 2023 in 2020 Archives
Hello there! Recently I got a Corsair MP510 and installed it in my Nitro 5 laptop.
I then proceeded to clone my OS (Windows 10 Home) using Macrium Reflect from the HDD to the SSD. After some issues, I managed to clone it and boot from the SSD, and decided to run a benchmark (CrystalDiskMark) to check if everything was fine.
Unfortunately, when I'm running the sequential read test, the SSD stops responding and Windows crashes.

Some notes:
1 - During the clone process, I was getting some "Error Code 9" and it would tell me the SSD could not be found (even though the clone process was already started). At these moments, checking the drive on Windows Partition Manager would result in some "Incorrect Function" error.

2 - After running a chkdsk /f/r on my HDD, the clone was successful and the SO booted normally in the SSD.
3 - During the tests, some of them run normally. The main issue is the first one. I've tried other benchmarks and they also crash.

4 - I decided to boot again from the HDD and run the tests on the SSD from there, and the result was an unresponsive SSD and the same "Incorrect Function" error when trying to open any folder inside it.

Would anyone know the possible cause of this? I could only think of:
1 - Faulty SSD (but unfortunately I can't test it on another computer)
2 - Some file system error during the clone process (I'm thinking about doing a clean Windows install to test it)
3 - Maybe the laptop isn't supporting it during heavy load? Faulty power supply, etc?

Either way, I'm thinking about using it as it is, since so far I haven't seen any problem during normal usage, and then try to fix it or RMA it if something else arises.

Any help is welcome. Thanks!

Information:
Windows 10 Home Single Language 64 bits
BIOS: v1.15
CPU: Intel Core i7-7700HQ
RAM: 16GB 
GPU: Geforce GTX 1050Ti
HDD: WD 1TB
SSD: Corsair MP510 480Gb

Answers