PE320QK

System
System Member Posts: 4,562 Seasoned Practitioner WiFi Icon
edited February 23 in 2020 Archives
This discussion was created from comments split from: Nitro XV273K randomly blacks out every now and then.

Answers

  • AstralStorm
    AstralStorm Member Posts: 4 New User
    Funny thing here. I've seen an identical issue on PE320QK (out of warranty) - that monitor has a taped in LCD cable (with a push in connector) with something that looked like scotch tape.
    Over time and heat, the tape can loosen or tighten and you will get a bad panel cable contact and rare panel blinks, that show up or disappear, and also will show up or disappear if you jiggle the monitor. It's fixable in 30 minutes with either glue on the socket or better, thermally stable tape.

    Acer, please use a proper keyed or levered connector next time. Heck, normal pushed in standard ribbon connector would do and is likely cheaper than this metal thing that does not have a latch. It's a major design flaw.
  • AstralStorm
    AstralStorm Member Posts: 4 New User
    Additionally the XV273K I have had the same issue. It went away when I jiggled the monitor. Probably same problem, bad connector for the panel.