Acer Aspire E5-511 Windows 8.1 Wifi disconnecting frequently

2»

Answers

  • habfan9
    habfan9 Member Posts: 14

    Tinkerer

    Hi again Jack. I'll try to be concise here. I ordered what I thought was the correct card but it won't fit. Also the little wires with the things on the end won't fit on the little things of the new card (one is damaged). So, long story short, I am returning it and getting the proper one. Anyways, in the meantime, the cable that operates the keyboard came out and no matter how I try to reinsert it, it won't stay in tightly and upon closing and booting up the laptop, keyboard won't work. How can I keep it in there? Glue/tape??
  • JackE
    JackE ACE Posts: 45,173 Trailblazer
    The 2230 (22mm x 30mm) should fit. What doesn't fit? Too wide? Too thick? Keyway? Can you show a side-by-side comparison?

    As for the KB ribbon cable, I use Scotch tape to hold the contacts together when the slider clamps breaks off.

    Jack E/NJ

    Jack E/NJ

  • habfan9
    habfan9 Member Posts: 14

    Tinkerer

    Mistakenly bought this. As you can see, it's damaged. Won't fit. 
    Re: ribbon - I don't believe anything broke off. It seems to have slipped out of the thing on the motherboard and now it won't stay in there on it's own. So I guess tape is the answer. 
  • JackE
    JackE ACE Posts: 45,173 Trailblazer
    Yes, I can see the antenna connector damage. Is the other end keyed the same way as the old card? Does that  fit OK? Jack E/NJ


    Jack E/NJ