Update bios from .bin file

In theory, you can use the same trick to force it to reflash the ME region.....change it from a 0 to a 1 or a 2 or 3.  

UpdateOEMME]
MEFileName=
CheckVersion=0
Command=
;MEFileName default : empty.
; String : if this file name or Multi-FD ME file name exist tool will run this case to flash ME.
;CheckVersion default : 0.
; 0 : Don't check ME file version.
; 1 : Check ME file version.
; 2 : When ME flash error is cause of same version and downgrade version do not show error and continue to flash.
; 3 : When ME flash error, show error but continue to flash. 
;Command default : empty.
; String : When this field is empty and don't want to check ME version, utility will use "-f %filename -generic -allowsv" as default command.
; The %filename is a keyword which will be replaced with the value in MEFileName within this section or the filename in MULTI_FD 

;ME default : 0.
; 0 : Don't flash.
; 1 : Flash ME region.
;DESC default : 0.
; 0 : Don't flash.
; 1 : Flash DESC region.
;Platform_Data default : 0.
; 0 : Don't flash.
; 1 : Flash Platform_Data region.
; For both Normal and Security Flash.

It’s also quite possible that you could permanently brick it.  Follow anything that I wrote at your own risk.