G3-571 - FPS Drops After Repasting CPU & GPU

Waddlesworth
Waddlesworth Member Posts: 17 Troubleshooter
edited November 2023 in 2020 Archives
So yesterday i followed this guide to repaste my cpu and gpu since my temperatures were always causing thermal throttling, i used the same thermal paste and pads as in the video:
https://www.youtube.com/watch?v=Ph2ibK79zd8

For some reason when I'm playing games, my GPU usage spikes to 100% at random and my fps drops to 10fps from for 5 or so seconds and my gpu usage goes from 60% to 100% without much change for my CPU. Any idea what could be causing this and how i could fix it?

Best Answer

  • Waddlesworth
    Waddlesworth Member Posts: 17 Troubleshooter
    Answer ✓
    Solved the problem!! Repasted it properly this time using a better amount of paste and rubbing alcohol to properly clean the CPU/GPU. Also i cleaned the air vents for the fans as they were completely clogged with dust which may have impacted performance dramatically

Answers

  • JackE
    JackE ACE Posts: 44,904 Trailblazer
    So what ACER model number are you trying to play games on? What games? Jack E/NJ

    Jack E/NJ

  • xapim
    xapim ACE Posts: 7,253 Pathfinder
    edited January 2020
    Waddlesworth how are your temps now after the repaste and which thermal paste did you applied (i suggest kryonaut always) if they are still high theres your fps drops issues its a bad repaste you would have to do it again and i dunno which method you used but the best its the spread method just a thin layer covering both diodes its enough too much its bad same as too less if the temps are ok could be something to do with drivers or some windows updates you can try a battery power drain followed with a bios setup defaults or even stock recovery clean install to rule out any software issues but make sure to backup whatever you need first


    https://www.userbenchmark.com/UserRun/11532543

    UserBenchmarks: Game 43%, Desk 61%, Work 40%
    CPU: Intel Core i5-7300HQ - 63.5%
    GPU: Nvidia GTX 1050-Ti (Mobile) - 41.9%
    SSD: WDC WDS200T2B0B-00YS70 2TB - 71.4%
    HDD: WD WD10SPZX-00HKTT0 1TB - 93.7%
    RAM: Kingston HyperX DDR4 2666 C15 2x16GB - 76.8%
    MBD: Acer Predator G3-572

    I'm not an Acer employee. (just here to help in the best way i can)
    If my answer fixed you issue please accept it for any other users who search for it would find it quickly thanks :)
    If you want to learn more about undervolting/optimizing windows join the Predator fb group and youtube channel:

    Owner/Admin (HOTEL HERO/Red-Sand/Opoka Opoka)
    https://www.facebook.com/groups/PredatorHelios300
    https://www.youtube.com/channel/UCNJwGUHxSJ8FKqAhnOqQuAw
    Acer support:
    https://www.acer.com/ac/en/US/content/service-contact
    http://www.acer.com/worldwide/support/  


  • Waddlesworth
    Waddlesworth Member Posts: 17 Troubleshooter
    JackE said:
    So what ACER model number are you trying to play games on? What games? Jack E/NJ
    G3-571 (i7-7700HQ GTX 1060), pretty much any game that is somewhat demanding for the GPU (even older games like Dark Souls Remastered)
  • Waddlesworth
    Waddlesworth Member Posts: 17 Troubleshooter
    xapim said:
    Waddlesworth how are your temps now after the repaste and which thermal paste did you applied (i suggest kryonaut always) if they are still high theres your fps drops issues its a bad repaste you would have to do it again and i dunno which method you used but the best its the spread method just a thin layer covering both diodes its enough too much its bad same as too less if the temps are ok could be something to do with drivers or some windows updates you can try a battery power drain followed with a bios setup defaults or even stock recovery clean install to rule out any software issues but make sure to backup whatever you need first
    GPU and CPU temps do reach 95 on high loads, so maybe i should do a better repaste again. I did use kryonaut so i'll probably try doing a better job since i may have used too much and i'll try a different cleaning solution for cleaning the cpu since there will still bronze colours on the GPU mostly
  • Waddlesworth
    Waddlesworth Member Posts: 17 Troubleshooter
    xapim said:
    Waddlesworth how are your temps now after the repaste and which thermal paste did you applied (i suggest kryonaut always) if they are still high theres your fps drops issues its a bad repaste you would have to do it again and i dunno which method you used but the best its the spread method just a thin layer covering both diodes its enough too much its bad same as too less if the temps are ok could be something to do with drivers or some windows updates you can try a battery power drain followed with a bios setup defaults or even stock recovery clean install to rule out any software issues but make sure to backup whatever you need first
    GPU and CPU temps do reach 95 on high loads, so maybe i should do a better repaste again. I did use kryonaut so i'll probably try doing a better job since i may have used too much and i'll try a different cleaning solution for cleaning the cpu since there will still bronze colours on the GPU mostly
  • Waddlesworth
    Waddlesworth Member Posts: 17 Troubleshooter
    Answer ✓
    Solved the problem!! Repasted it properly this time using a better amount of paste and rubbing alcohol to properly clean the CPU/GPU. Also i cleaned the air vents for the fans as they were completely clogged with dust which may have impacted performance dramatically
  • JackE
    JackE ACE Posts: 44,904 Trailblazer
    Congrats on your successful re-pasting and re-cleaning jobs! Jack E/NJ

    Jack E/NJ