aspire z3-715 need help I.D.ing a part number

HsPanda
HsPanda Member Posts: 13

Tinkerer

edited October 2023 in 2020 Archives


trying to figure the model number or name for this part for... well obvious reasons..so i can get a replacement 
from help with a previous thread it was suggested they were 
  • KL.23808.004
  • KL.2380E.001
  • KL.2380E.002
but when doing searches the parts i found dont appear to be the same (see link)
https://www.amazon.ca/Krenew-Replacement-1920x1080-KL-23808-004-Non-Touchscreen/dp/B082MQW59N/ref=mp_s_a_1_1?keywords=kl.23808.004&qid=1577904885&sr=8-1

(also this seems to be the only spot i can find said part that ships to canada so if someone knows another spot or even a local area in edmonton please let me know)

from what i can tell this appears to be the insert that goes inside the peice i need? (which i have and it works fine with no damage) 

Best Answer

Answers

  • Sharanji
    Sharanji ACE Posts: 4,328 Pathfinder
    HsPanda 
    These are some of the officially listed LCD screen display for Aspire z3-715


    Kindly check with the Acer part partners listed in the below weblink
    https://us.answers.acer.com/app/answers/detail/a_id/5969


    Hit 'Like' if you find the answer helpful!  :)
    Click on 'Yes' if the comment answers your question!
  • JackE
    JackE ACE Posts: 44,905 Trailblazer
    The correct part number KL.2380G.001 for the  23.8" HANNSTAR HSDT23873N25-S0 touchpanel. Googling the part number turns up the Canadian sourceitstore which I think can be bought separately from the whole LCD assembly but you'll have to chat with them to be sure. Jack E/NJ




    Jack E/NJ

  • HsPanda
    HsPanda Member Posts: 13

    Tinkerer

    JackE said:
    The correct part number KL.2380G.001 for the  23.8" HANNSTAR HSDT23873N25-S0 touchpanel. Googling the part number turns up the Canadian sourceitstore which I think can be bought separately from the whole LCD assembly but you'll have to chat with them to be sure. Jack E/NJ




    mines the non-touch screen version, is this for the touch screen or non-touch screen? and does it make a difference?
  • JackE
    JackE ACE Posts: 44,905 Trailblazer
    As @Sharanji posted, you seem to have the right part numbers for non-touch models but they're the whole assembly. Is that's what's left of your LCD screen? I'd give the sourceitstore a call tomorrow to get the correct part. Or use their chatline which seems to be running today. Jack E/NJ

    Jack E/NJ

  • HsPanda
    HsPanda Member Posts: 13

    Tinkerer

    JackE said:
    As @Sharanji posted, you seem to have the right part numbers for non-touch models but they're the whole assembly. Is that's what's left of your LCD screen? I'd give the sourceitstore a call tomorrow to get the correct part. Or use their chatline which seems to be running today. Jack E/NJ

    no thats what i've disassembled, the lcd part is percectly fine :)
    though it's currently plastic-wrapped to avoid getting dirty
  • JackE
    JackE ACE Posts: 44,905 Trailblazer
    That's what stumped me at first. It's just a bezel & coverplate. If sourceitstore doesn't have it or it's overpriced, I'd probably head on down to the nearest HomeDepot and have them cut out a new lexan or plexiglas coverplate.   Jack E/NJ

    Jack E/NJ

  • HsPanda
    HsPanda Member Posts: 13

    Tinkerer

    JackE said:
    That's what stumped me at first. It's just a bezel & coverplate. If sourceitstore doesn't have it or it's overpriced, I'd probably head on down to the nearest HomeDepot and have them cut out a new lexan or plexiglas coverplate.   Jack E/NJ


    i was thinking that but i find the plexiglas coverplate is being more then a little difficult to remove due to the strength of the adhesive doublesided tape =/ ...though if you have any suggestions on how to remove it?
  • JackE
    JackE ACE Posts: 44,905 Trailblazer
    After removing as much of the broken plexiglas as possible to give some room to work from the inside of the bezel,  try to slip a thin putty knife or safety razor between the bezel and plexiglas remnants to break the tape bond. A little bit at a time to avoid cracking the bezel.

    The other easier option is to simply use color-coordinated duct tape as the bezel to affix the new HomeDepot coverplate to the back of the lid.

    Jack E/NJ   

    Jack E/NJ

  • HsPanda
    HsPanda Member Posts: 13

    Tinkerer

    Answer ✓
    Sharanji said:
    HsPanda 
    These are some of the officially listed LCD screen display for Aspire z3-715


    Kindly check with the Acer part partners listed in the below weblink
    https://us.answers.acer.com/app/answers/detail/a_id/5969


    Hit 'Like' if you find the answer helpful!  :)
    Click on 'Yes' if the comment answers your question!
    i wasnt aware this was a thing! awesome thank you!
  • HsPanda
    HsPanda Member Posts: 13

    Tinkerer

    Sharanji said:
    HsPanda 
    These are some of the officially listed LCD screen display for Aspire z3-715


    Kindly check with the Acer part partners listed in the below weblink
    https://us.answers.acer.com/app/answers/detail/a_id/5969


    Hit 'Like' if you find the answer helpful!  :)
    Click on 'Yes' if the comment answers your question!
    i wasnt aware this was a thing! awesome thank you!