Acer Aspire 7741G BSOD after RAM upgrade

Waelvis
Waelvis Member Posts: 5 New User
edited October 2023 in 2020 Archives
Hi,

I'm still using an older Acer Aspire 7741G as 2nd device. Mostly to surf while watching TV or so.
Recently I bought "Football Manager 20", and this laptop was still good enough to play it. But it lags a bit due to a lack of ram (constantly 3.9 of 4GB used so I can't watch a show and play the game at the same time).

So I decided to upgrade the ram to 8Gb. I bought 2 x "Crucial DDR3L Sodimm 4GB 1600 C11", but when I install them and try to boot my laptop I get a BSOD saying "kernel security check failure".
Somebody told me maybe updating my BIOS would help, so I found a newer version on the Acer support page (I have BIOS version 1.15, and version 1.26 is available.
But when I try to run it, I simply get the error "flash bios fail (0x4D0)"

I can get into the BIOS, and there it shows 8GB ram installed.

Is there anything I'm missing, or will it simply not work?

Best Answer

  • JackE
    JackE ACE Posts: 44,889 Trailblazer
    Answer ✓
    Some bad news. Some good news.

    First the bad. Older DDR3L busses sometimes seem to be fussy about trying to use lower voltage higher speed modules than specified. Your's seems to be one of them.

    The good. Order a pair of Samsung M471B5273CH0-CH9 LF 1333MHz 1.5v 4GB modules for less than € 50 from Amazon These are specifically recommended for your machine for 8GB. https://www.amazon.fr/dp/B01ADCPN8I/ref=twister_B01N4KAN0Q?_encoding=UTF8&th=1

    Jack E/NJ




    Jack E/NJ

Answers

  • JackE
    JackE ACE Posts: 44,889 Trailblazer
    Still Win7-32 or Win7-64? Jack E/NJ

    Jack E/NJ

  • Waelvis
    Waelvis Member Posts: 5 New User
    I have Win10-64 installed
  • JackE
    JackE ACE Posts: 44,889 Trailblazer
    >>>I can get into the BIOS, and there it shows 8GB ram installed.>>>

    Re-enter the BIOS. Press F9 to load system defaults. Press F10 to save settings and exit. Jack E?NJ

    Jack E/NJ

  • Waelvis
    Waelvis Member Posts: 5 New User
    JackE said:
    >>>I can get into the BIOS, and there it shows 8GB ram installed.>>>

    Re-enter the BIOS. Press F9 to load system defaults. Press F10 to save settings and exit. Jack E?NJ
    Didn't work :':anguished:
  • JackE
    JackE ACE Posts: 44,889 Trailblazer
    Try only one of the 4GB modules in one socket. If no joy, try it in the other socket. Same with the other 4GB module only. Can you get either of them to work separately? If not, replace the original modules and make sure the old modules still work OK. Jack E/NJ

    Jack E/NJ

  • Waelvis
    Waelvis Member Posts: 5 New User
    JackE said:
    Try only one of the 4GB modules in one socket. If no joy, try it in the other socket. Same with the other 4GB module only. Can you get either of them to work separately? If not, replace the original modules and make sure the old modules still work OK. Jack E/NJ
    Whenever there is 1 of the new modules installed in any socket I get the BSOD, with one or both my old modules everything works perfectly.

    - New module 1 in slot 1 = bsod
    - New module 1 in slot 2 = bsod
    - New module 2 in slot 1 = bsod
    - New module 2 in slot 2 = bsod
    - Old module in slot 1/2 and any new in the other = bsod
    - One or both old ones = working
  • JackE
    JackE ACE Posts: 44,889 Trailblazer
    Answer ✓
    Some bad news. Some good news.

    First the bad. Older DDR3L busses sometimes seem to be fussy about trying to use lower voltage higher speed modules than specified. Your's seems to be one of them.

    The good. Order a pair of Samsung M471B5273CH0-CH9 LF 1333MHz 1.5v 4GB modules for less than € 50 from Amazon These are specifically recommended for your machine for 8GB. https://www.amazon.fr/dp/B01ADCPN8I/ref=twister_B01N4KAN0Q?_encoding=UTF8&th=1

    Jack E/NJ




    Jack E/NJ

  • Waelvis
    Waelvis Member Posts: 5 New User
    JackE said:
    Some bad news. Some good news.

    First the bad. Older DDR3L busses sometimes seem to be fussy about trying to use lower voltage higher speed modules than specified. Your's seems to be one of them.

    The good. Order a pair of Samsung M471B5273CH0-CH9 LF 1333MHz 1.5v 4GB modules for less than € 50 from Amazon These are specifically recommended for your machine for 8GB. https://www.amazon.fr/dp/B01ADCPN8I/ref=twister_B01N4KAN0Q?_encoding=UTF8&th=1

    Jack E/NJ

    Thanks man!!!

    I Ordered those you suggested, and they work. 

    Luckily I got a full refund on those Crucial modules I bought.
  • JackE
    JackE ACE Posts: 44,889 Trailblazer
    Congrats on your success. Jack E/NJ

    Jack E/NJ