Is it possible to convert to Windows 10 from Windows 7 on my Aspire Z5700?

CraigM
CraigM Member Posts: 14

Tinkerer
edited March 1 in 2020 Archives
I have the exact problem described by manicmechanic, Post 9 in August 2015 archive. Windows 10 stalls at 85% and then locks up at 88%. I followed manicmechanic's instructions to the T, as far as I know. It fails differently, in that it gets to 85% and displays "Your PC ran into a problem and needs to restart" rather than hang with a black screen. I have updated to latest BIOS P01.B0 (2010) as MS claimed the BIOS had to be dated 2012 or later, but manicmechanic said his install worked with the P01.B0. Where do I go from here?
«1

Answers

  • billsey
    billsey ACE Posts: 34,234 Trailblazer
    Start by looking at the log files that the Windows 10 installer creates. The setuperr.log and setupact.log should be in $Windows.~BT\source\panthers\.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • CraigM
    CraigM Member Posts: 14

    Tinkerer
    billsey, the setupact.log is huge. I counted over 50 errors and stopped counting, but I'm going to post the top of the file, up to where the Panther logging is closed:

    2019-12-13 10:19:26, Info                  MOUPG  *************** SetupHost Logging Begin ***************
    2019-12-13 10:19:26, Info                  MOUPG  SetupHost::Initialize
    2019-12-13 10:19:26, Info                  MOUPG  SetupHost::Initialize: ModulePath             = [C:\$WINDOWS.~BT\Sources]
    2019-12-13 10:19:26, Info                  MOUPG  SetupHost::Initialize: WorkingPath            = [C:\$WINDOWS.~BT\Sources]
    2019-12-13 10:19:26, Info                  MOUPG  SetupHost::Initialize: LoggingPath            = [C:\$WINDOWS.~BT\Sources\Panther]
    2019-12-13 10:19:26, Info                  MOUPG  SetupHost::Initialize: MediaPath              = [C:\Users\Craig]
    2019-12-13 10:19:26, Info                  MOUPG  SetupHost::Initialize: InstallFilePath        = [C:\Users\Craig\Sources\Install.wim]
    2019-12-13 10:19:26, Info                  MOUPG  SetupHost::Initialize: ActionListFilePath     = []
    2019-12-13 10:19:26, Info                  MOUPG  SetupHost::Initialize: CmdLine                = [/Install /Media  /InstallFile "C:\Users\Craig\Sources\Install.wim" /MediaPath "C:\Users\Craig"]
    2019-12-13 10:19:26, Info                  MOUPG  SetupHost::Initialize: Mode                   = [0x2]
    2019-12-13 10:19:26, Info                  MOUPG  SetupHost::Initialize: Scenario               = [0x1]
    2019-12-13 10:19:26, Info                  MOUPG  SetupHost::Initialize: Flags                  = [0x800]
    2019-12-13 10:19:26, Info                  MOUPG  SetupHost: Setup build version is: 10.0.18362.418 (19h1_release_svc_prod1.191005-1654)
    2019-12-13 10:19:26, Info                  CONX   Host OS version: 6.1.7601.1130 Service Pack 1 (1.0) Platform 0x2, SuiteMask 0x300, ProdType 0x1
    2019-12-13 10:19:26, Info                  CONX   Source OS: Host SKU Info: Edition = 'HomePremium', Edition Type = 'Client', Installation Type = 'Core', Product Name = 'Windows 7 Home Premium', Arch = amd64, StationType = Client Workstation, Stage type = Staged Image
    2019-12-13 10:19:26, Info                  MOUPG      Host OS License State   [ Genuine ]
    2019-12-13 10:19:26, Info                  MOUPG      Host OS Architecture    [ x64 ]
    2019-12-13 10:19:26, Info                  MOUPG      Host OS Language Id     [ 1033 ]
    2019-12-13 10:19:26, Info                  MOUPG      User UI Language Id     [ 1033 ]
    2019-12-13 10:19:26, Info                  MOUPG      Host OS Edition         [ HomePremium ]
    2019-12-13 10:19:26, Info                  MOUPG      Host OS Version         [ 6.1.7601 ]
    2019-12-13 10:19:26, Info                  MOUPG      Host OS Build String    [ 7601.24540.amd64fre.win7sp1_ldr_escrow.191127-1706 ]
    2019-12-13 10:19:26, Info                  MOUPG  SetupHost: Creating setup mutex...
    2019-12-13 10:19:26, Info                  MOUPG  SetupHost::InitializeComponents
    2019-12-13 10:19:26, Info                  MOUPG  SetupHost: Loading ID: [c7b6e4de-b741-42d8-ac05-16738c9e0bc5] from [C:\$WINDOWS.~BT\Sources\MediaSetupUIMgr.dll]...
    2019-12-13 10:19:26, Info                  MOUPG  SetupHost: Loading complete.
    2019-12-13 10:19:26, Info                  MOUPG  CInstallUI::Initialize
    2019-12-13 10:19:26, Info                  MOUPG  SetupHost: Loading ID: [3d3ad714-f8d8-4c84-ad5f-10938c2f3339] from [C:\$WINDOWS.~BT\Sources\SetupCore.dll]...
    2019-12-13 10:19:27, Info                  MOUPG  SetupHost: Loading complete.
    2019-12-13 10:19:27, Info                  MOUPG  SetupHost: Loading AutomationManager manager...
    2019-12-13 10:19:27, Info                  MOUPG  SetupHost: Loading ID: [edac948b-844e-4a51-9ba9-34520bd9ff9f] from [C:\$WINDOWS.~BT\Sources\SetupCore.dll]...
    2019-12-13 10:19:27, Info                  MOUPG  SetupHost: Loading complete.
    2019-12-13 10:19:27, Info                  MOUPG  SetupHost: Looking for automation file...
    2019-12-13 10:19:27, Info                  MOUPG  SetupHost: Initializing automation...
    2019-12-13 10:19:27, Info                  SP     CSetupPlatform::Initialize: Setup log starts:
    2019-12-13 10:19:27, Info                  SP     Host system information:
                                       VM: NO
                                       Firmware type: PCAT
                                       Manufacturer: Acer
                                       Model : Aspire Z5700
                                       BIOS name : Default System BIOS
                                       BIOS version : P01-B0
                                       BIOS release date : 20101226000000.000000+000
                                       Total memory : 4294967296
                                       Number of physical CPUs : 1
                                       Number of logical CPUs : 2
                                       Processor manufacturer : GenuineIntel
                                       Processor name : Intel(R) Pentium(R) CPU        G6950  @ 2.80GHz
                                       Processor caption : Intel64 Family 6 Model 37 Stepping 5
                                       Processor architecture : x64
                                       Processor clock : 2800

    2019-12-13 10:19:27, Info                  SP     No Antivirus software was found.
    2019-12-13 10:19:27, Info                         SPGenerateCopyListFromConfigFile: Didn't find file list in C:\$WINDOWS.~BT\Sources\setupplatform.cfg, section Footprint.Basic.amd64
    2019-12-13 10:19:27, Info                         SPGetFootprintCapabilities: Starting verification of footprint section Footprint.Basic
    2019-12-13 10:19:27, Info                         SPGetFootprintCapabilities: Could not find footprint file C:\$WINDOWS.~BT\Sources\WinSetupBoot.sys
    2019-12-13 10:19:27, Warning                      SPGetFootprintCapabilities: Footprint [Footprint.Basic] incomplete; the platform capability will not be available
    2019-12-13 10:19:27, Info                         SPGenerateCopyListFromConfigFile: Didn't find file list in C:\$WINDOWS.~BT\Sources\setupplatform.cfg, section Footprint.Servicing.amd64
    2019-12-13 10:19:27, Info                         SPGetFootprintCapabilities: Starting verification of footprint section Footprint.Servicing
    2019-12-13 10:19:27, Info                         SPGetFootprintCapabilities: Could not find footprint file C:\$WINDOWS.~BT\Sources\dismapi.dll
    2019-12-13 10:19:27, Warning                      SPGetFootprintCapabilities: Footprint [Footprint.Servicing] incomplete; the platform capability will not be available
    2019-12-13 10:19:27, Info                         SPGenerateCopyListFromConfigFile: Didn't find file list in C:\$WINDOWS.~BT\Sources\setupplatform.cfg, section Footprint.ICB.amd64
    2019-12-13 10:19:27, Info                         SPGetFootprintCapabilities: Starting verification of footprint section Footprint.ICB
    2019-12-13 10:19:27, Info                         SPGetFootprintCapabilities: Could not find footprint file C:\$WINDOWS.~BT\Sources\cmi2migxml.dll
    2019-12-13 10:19:27, Warning                      SPGetFootprintCapabilities: Footprint [Footprint.ICB] incomplete; the platform capability will not be available
    2019-12-13 10:19:27, Info                         SPGenerateCopyListFromConfigFile: Didn't find file list in C:\$WINDOWS.~BT\Sources\setupplatform.cfg, section Footprint.Migration.amd64
    2019-12-13 10:19:27, Info                         SPGetFootprintCapabilities: Starting verification of footprint section Footprint.Migration
    2019-12-13 10:19:27, Info                         SPGetFootprintCapabilities: Could not find footprint file C:\$WINDOWS.~BT\Sources\cmi2migxml.dll
    2019-12-13 10:19:27, Warning                      SPGetFootprintCapabilities: Footprint [Footprint.Migration] incomplete; the platform capability will not be available
    2019-12-13 10:19:27, Info                         Initializing diagnostics helper; data file = (NULL)
    2019-12-13 10:19:27, Info                         No existing diagnostics data
    2019-12-13 10:19:27, Info                         Reading onesetting for tracing settings
    2019-12-13 10:19:27, Info                         Onesettings: Querying Prod server
    2019-12-13 10:19:29, Info                         Reading onesetting for tracing settings completed, Error: 0x1
    2019-12-13 10:19:29, Info                         Tracing: Read settings from onesettings:m_bGlobalLoggerEnabled: 0x0,m_bSetupAutoLoggerEnabled: 0x0,m_bUserModeTracingEnabled: 0x0,m_bKernelModeTracingEnabled: 0x0;m_dwKernelFlags: 0x0;
    2019-12-13 10:19:29, Info                         Tracing: Autologger/user mode provider read from onesetting: 
    2019-12-13 10:19:29, Info                         Key CollectTrace is not available.
    2019-12-13 10:19:29, Warning               SP     CSetupPlatform::Initialize: Failed to initialize tracing
    2019-12-13 10:19:29, Info                         VDS available
    2019-12-13 10:19:29, Info                         Key CollectTrace is not available.
    2019-12-13 10:19:29, Info                  SP     Releasing the setup platform
    2019-12-13 10:19:29, Info                  SP       StopTelemetry: 0
    2019-12-13 10:19:29, Info                  SP       UploadTelemetryData: 0
    2019-12-13 10:19:29, Info                  SP       CorrelationVector: <NULL>
    2019-12-13 10:19:29, Info                  SP     Try to merge diagnostics data from default new system data file
    2019-12-13 10:19:29, Info                  SP     Skip merge diagnostics data since C:\$WINDOWS.~BT\Sources\Diagnostics\diagnostics.dat is not exist
    2019-12-13 10:19:29, Info                  SP     Finish merge diagnostics data
    2019-12-13 10:19:29, Info                  SP     Start uploading diagnostics data for setup platform
    2019-12-13 10:19:29, Info                  SP     Not opted-in to SQM. Diagnostics data will NOT be uploaded
    2019-12-13 10:19:29, Info                         Key CollectTrace is not available.
    2019-12-13 10:19:29, Info                  SP     Closing Panther Logging

    #### CraigM: Then it starts the install of Windows 10:

    2019-12-13 10:19:29, Info                  MOUPG      Install Index   [ 11 ]
    2019-12-13 10:19:29, Info                  MOUPG      Product Name    [ Microsoft� Windows� Operating System ]
    2019-12-13 10:19:29, Info                  MOUPG      Version         [ 10.0.18362 (418.0) ]
    2019-12-13 10:19:29, Info                  MOUPG      Architecture    [ x64 ]
    2019-12-13 10:19:29, Info                  MOUPG      Edition         [ ProfessionalWorkstationN ]
    2019-12-13 10:19:29, Info                  MOUPG      Language        [ en-US ]
    2019-12-13 10:19:29, Info                  MOUPG  SetupCore::Initialize

    #### CraigM and the first error & warning is very quick:
    2019-12-13 10:19:29, Error                 MOUPG CSystemHelper::CheckConnectedStandby(642): Result = 0x80070057
    2019-12-13 10:19:29, Warning               MOUPG  SetupUI::BlockSystemSleep - CheckConnectedStandby failed: [0x80070057]

    #### CraigM the second error occurs 1 minute 13 seconds later:
    2019-12-13 10:21:12, Error                 MOUPG  CFCAcquirerDCAT::GetCTACAttributes(652): Result = 0x8007007E[gle=0x0000007e]
    2019-12-13 10:21:12, Warning               MOUPG  FCAcquirerDCAT: Error on getting CTAC attributes: [0x8007007E]
  • CraigM
    CraigM Member Posts: 14

    Tinkerer
    billsey, posted a comment on the errors in the setuperr.log, but I don't see it here. I can only assume that it was too large, as I tried to post a lot of the error log. I can revisit the setuperr log, if you have some further guidance on what you would be interested in. I see that I can attach a file. So, I will attach the setuperr.log file here. It doesn't appear this loader will allow me to upload the file. It doesn't have a hidden property, so I don't know why it can't be seen by this software.
  • billsey
    billsey ACE Posts: 34,234 Trailblazer
    So I saw a couple of others users that started with that error. In one case it was a conflict with their GPU and onboard video. They removed the GPU, did the upgrade, then replaced the GPU and installed its drivers. In the other case the user had two USB keyboards connected at one time. Could you try with everything unneeded disconnected?
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • CraigM
    CraigM Member Posts: 14

    Tinkerer
    billsey, much thanks! The setuperr.log is about 5 pages of errors. I'm not knowledgeable enough to make sense of it, but here are the first 50 lines, down to the error that repeats after that:
    setuperr.log:
    2019-12-13 10:19:29, Error     MOUPG CSystemHelper::CheckConnectedStandby(642): Result = 0x80070057
    2019-12-13 10:21:12, Error     MOUPG  CFCAcquirerDCAT::GetCTACAttributes(652): Result = 0x8007007E[gle=0x0000007e]

    2019-12-13 10:21:22, Error      CSI    00000001 (F)STATUS_OBJECT_NAME_NOT_FOUND #10# from Windows::Rtl::SystemImplementation::DirectRegistryProvider::SysQueryValueKey(flags = 0, key = 6e4 ('\REGISTRY\MACHINE\SYSTEM\Setup'), vn = [l:7 ml:8]'Compact', kvic = 2, kvi = 2, disp = 0)[gle=0xd0000034]

    2019-12-13 10:21:22, Error      CSI    00000002 (F) STATUS_OBJECT_NAME_NOT_FOUND #9# from Windows::Rtl::SystemImplementation::CKey::QueryValue(flags = 0, kn = [l:31]'\Registry\Machine\SYSTEM\Setup\', vn = [l:7 ml:8]'Compact', ic = KeyValuePartialInformation, info = {l:0 b:}, disp = 0)[gle=0xd0000034]

    2019-12-13 10:21:27, Error      MOUPG  CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Suspend(1253): Result = 0xC1800104[gle=0x00000002]

    2019-12-13 10:21:27, Error                 MOUPG  CDlpTask::CheckUserInterruptEx(3060): Result = 0x800704D3
    2019-12-13 10:21:27, Error                 MOUPG  CDlpTask::CheckUserInterrupt(3112): Result = 0x800704D3
    2019-12-13 10:21:27, Error                 MOUPG  CSetupManager::ExecuteInstallMode(794): Result = 0x800705BB
    2019-12-13 10:21:27, Error                 MOUPG  CSetupManager::ExecuteDownlevelMode(392): Result = 0x800705BB
    2019-12-13 10:21:27, Error                 MOUPG  CSetupManager::Execute(284): Result = 0x800705BB
    2019-12-13 10:21:27, Error                 MOUPG  CSetupHost::Execute(420): Result = 0x800705BB
    2019-12-13 10:21:37, Error                 MOUPG CSystemHelper::CheckConnectedStandby(642): Result = 0x80070057
    2019-12-13 10:21:43, Error               CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
    2019-12-13 10:21:43, Error                MOUPG CDlpActionProductKeyValidate::ReportDownlevelInstallChannel(3135):
    Result = 0x8A010101
    2019-12-13 10:21:43, Error                 MOUPG  ProductKey: Failed to report Host OS channel to telemetry.
    2019-12-13 10:21:58, Error                 CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
    2019-12-13 10:22:07, Error                 MOUPG  CFCAcquirerDCAT::GetCTACAttributes(652): Result = 0x8007007E[gle=0x0000007e]
    2019-12-13 10:22:16, Error                CSI    00000001 (F) STATUS_OBJECT_NAME_NOT_FOUND #10# from Windows::Rtl::SystemImplementation::DirectRegistryProvider::SysQueryValueKey(flags = 0, key = 7a4 ('\REGISTRY\MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion'), vn = [l:25 ml:26]'CurrentMajorVersionNumber', kvic = 2, kvi = 2, disp = 0)[gle=0xd0000034]

    2019-12-13 10:22:16, Error                CSI    00000002 (F) STATUS_OBJECT_NAME_NOT_FOUND #9# from Windows::Rtl::SystemImplementation::CKey::QueryValue(flags = 0, kn = [l:63]'\Registry\Machine\SOFTWARE\Microsoft\Windows NT\CurrentVersion\', vn = [l:25 ml:26]'CurrentMajorVersionNumber', ic = KeyValuePartialInformation, info = {l:0 b:}, disp = 0)[gle=0xd0000034]

    2019-12-13 10:22:16, Error                CSI    00000003 (F) STATUS_OBJECT_NAME_NOT_FOUND #38# from Windows::Rtl::SystemImplementation::DirectRegistryProvider::SysQueryValueKey(flags = 0, key = 7a4 ('\REGISTRY\MACHINE\SYSTEM\Setup'), vn = [l:7 ml:8]'Compact', kvic = 2, kvi = 2, disp = 0)[gle=0xd0000034]

    2019-12-13 10:22:16, Error                CSI    00000004 (F) STATUS_OBJECT_NAME_NOT_FOUND #37# from Windows::Rtl::SystemImplementation::CKey::QueryValue(flags = 0, kn = [l:31]'\Registry\Machine\SYSTEM\Setup\', vn = [l:7 ml:8]'Compact', ic = KeyValuePartialInformation, info = {l:0 b:}, disp = 0)[gle=0xd0000034]

    2019-12-13 10:22:16, Error                CSI    00000005 (F) STATUS_OBJECT_NAME_NOT_FOUND #45# from Windows::Rtl::SystemImplementation::DirectRegistryProvider::SysQueryValueKey(flags = 0, key = 79c ('\REGISTRY\MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion'), vn = [l:11 ml:12]'BuildBranch', kvic = 2, kvi = 2, disp = 0)[gle=0xd0000034]

    2019-12-13 10:22:16, Error                CSI    00000006 (F) STATUS_OBJECT_NAME_NOT_FOUND #44# from Windows::Rtl::SystemImplementation::CKey::QueryValue(flags = 0, kn = [l:63]'\Registry\Machine\SOFTWARE\Microsoft\Windows NT\CurrentVersion\', vn = [l:11 ml:12]'BuildBranch', ic = KeyValuePartialInformation, info = {l:0 b:}, disp = 0)[gle=0xd0000034]

    2019-12-13 10:25:38, Error              CSI    00000007 (F) STATUS_OBJECT_NAME_NOT_FOUND #75# from Windows::Rtl::SystemImplementation::DirectRegistryProvider::SysQueryValueKey(flags = 0, key = 268 ('\REGISTRY\MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts'), vn = [l:21 ml:22]'Arial Nova (TrueType)', kvic = 2, kvi = 2, disp = 0)[gle=0xd0000034]

    2019-12-13 10:25:38, Error                CSI    00000008 (F) STATUS_OBJECT_NAME_NOT_FOUND #74# from Windows::Rtl::SystemImplementation::CKey::QueryValue(flags = 0, kn = [l:69]'\Registry\Machine\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts\', vn = [l:21 ml:22]'Arial Nova (TrueType)', ic = KeyValuePartialInformation, info = {l:0 b:}, disp = 0)[gle=0xd0000034]

    2019-12-13 10:26:49, Error                 SP     Failed to test whether this device is connected standby. Error: 0xD000000D
    2019-12-13 10:26:49, Error                 SP     Failed to test whether this device is connected standby. Error: 0xD000000D
    2019-12-13 10:26:50, Error                 DU     DU::CDUSession::BuildSearchCriteria: Caller profile search criterion is not supported. hr = 0x80070032
    2019-12-13 10:26:50, Error                 DU     DU::CDUSession::Search: Failed to build the search criteria. hr = 0x80070032
    2019-12-13 10:27:21, Error                 CONX   hDevInfo invalid handle value
    2019-12-13 10:28:32, Error                 CONX   Windows::Compat::Appraiser::AssetUtils::GetProgramNameAndRegistryPathFromFile (992):   App should have registry path, swallowing error.[gle=0x8007139f]
    2019-12-13 10:28:32, Error                 CONX   Windows::Compat::Appraiser::AssetUtils::GetProgramNameAndRegistryPathFromFile (992):   App should have registry path, swallowing error.[gle=0x8007139f]
    2019-12-13 10:28:33, Error                 SP     CNewSystem::PreInitialize: FveCheckSuspendBitLockerOnUpgrade failed: 0x8007007f, assuming auto-unlock is not supported[gle=0x0000007f]
    2019-12-13 10:28:34, Error                 SP     Failed to test whether this device is connected standby. Error: 0xD000000D[gle=0x000000cb]
    2019-12-13 10:28:34, Error                 SP     Failed to test whether this device is connected standby. Error: 0xD000000D
    2019-12-13 10:43:33, Error                 SP     CNewSystem::PreInitialize: FveCheckSuspendBitLockerOnUpgrade failed: 0x8007007f, assuming auto-unlock is not supported[gle=0x0000007f]
    2019-12-13 10:43:35, Error                 SP     SPGetReserveManager: Failed to get Update Reserve Manager. hr = 0x80070032[gle=0x0000007f]
    2019-12-13 10:43:35, Error                 SP     SPStorageReserveAvailable: Failed to get Update Reserve manager. hr = 0x80070032[gle=0x0000007f]
    2019-12-13 10:46:33, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-RasServer-MigPlugin\RasMigPlugin.dll, {D26AA4A5-92AD-48DB-8D59-95EF0DCE6939}, 0) failed, hr=[0x8007007f].
    2019-12-13 10:46:33, Error      [0x080387] MIG    Failure while calling IDiscovery->Discover for Plugin={ServerPath="Microsoft-Windows-RasServer-MigPlugin\RasMigPlugin.dll", CLSID={D26AA4A5-92AD-48DB-8D59-95EF0DCE6939}, ThreadingModel=Apartment}. Error: 0x8007007F
    2019-12-13 10:46:38, Error                 SP     FOD Validator: Failed to Get Capabilities using DISM API. Error: 80004002[gle=0x0000007a]
    2019-12-13 10:46:39, Error                 SP     FOD Validator: Failed to build FoD list, will remove validator. Error: 80004002
    2019-12-13 10:48:51, Error                 SP     pSPRemoveUpgradeRegTree: failed to delete reg tree HKLM\SYSTEM\Setup\Upgrade[gle=0x00000005]

    ### CraigM: This next set of errors (0x8007007e/7f) is repeated for about 4 pages.
    2019-12-13 10:51:22, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Printing-LocalPrinting-Replacement\APMonPortMig.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7f.[gle=0x0000007f]
     2019-12-13 10:51:22, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2019-12-13 10:51:22, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Printing-LocalPrinting-Replacement\APMonPortMig.dll, {4BC43F3F-308E-4DB9-B53B-7A31C5F9D5BD}, 0) failed, hr=[0x8007007f].
    2019-12-13 10:51:22, Error      [0x080387] MIG    Failure while calling IDiscovery->Discover for Plugin={ServerPath="Printing-LocalPrinting-Replacement\APMonPortMig.dll", CLSID={4BC43F3F-308E-4DB9-B53B-7A31C5F9D5BD}, ThreadingModel=Apartment}. Error: 0x8007007F
    2019-12-13 10:51:23, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-RasApi-Mig\pbkmigr.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7f.[gle=0x0000007f]
    2019-12-13 10:51:23, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]

    #### CraigM: Then, after 4 pages of MIG failures (0x8007007e/7f), it fails with:

    2019-12-13 10:55:30, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Client-License-Platform-Service-Migration\ClipMigPlugin.dll, {6014E67F-2537-48F9-951D-D29D720523E1}, 0) failed, hr=[0x8007007e].
    2019-12-13 10:56:02, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Unable to query {a45c254e-df1c-4efd-8020-67d146a850e0}[14] property from 'UUID:1BDDCEDA-1DD2-11B2-9D7B-FA2BFB371A42\UMB\3&28D79CBA&0&UUID:1BDDCEDA-1DD2-11B2-9D7B-FA2BFB371A42'. Error = 0x00000490
    2019-12-13 10:56:05, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Unable to query LocationPaths property from 'SCSI\CDROM&VEN_MAGICISO&PROD_VIRTUAL_DVD-ROM&REV_1.0A\1&2AFD7D61&0&0000'. Error = 0x0000000D
    2019-12-13 10:56:07, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Unable to determine inbox status of driver 'netavpna.inf' for 'ROOT\MS_AGILEVPNMINIPORT\0000'. Error = 0x00000490
    2019-12-13 10:56:07, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Unable to determine inbox status of driver 'netrasa.inf' for 'ROOT\MS_L2TPMINIPORT\0000'. Error = 0x00000490

    #### CraigM with 6 more similar errors 0x0808fe & 0x00000490.
    #### CraigM Then with:

     Msg:[Migrated key for Path $OFFLINE_RW_2D8F1358$SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\PropertySystem\PropertySchema.Migrated for 32-bit hive not found ] 

    2019-12-13 11:58:02, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!RemoveObsoleteCHSHKLMRegkey - fail to open regkey (software\Microsoft\CTF\TIP\{E429B25A-E5D3-4D1F-9BE3-0C608477E3A1}\LanguageProfile\0x00000804@contishot

    2019-12-13 11:58:02, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!ApplySuccess() remove HKLM Registries error
    2019-12-13 11:58:02, Error      [0x08038d] MIG    Failure while calling IPostApply->ApplySuccess for Plugin={ServerPath="Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll", CLSID={43CCF250-2A74-48c6-9620-FC312EC475D6}, ThreadingModel=Apartment}. Error: 0x80070002
    2019-12-13 11:58:02, Error                 SP     Error READ, 0x00000002 while gathering/applying object: apply-success, Action,CMXEPlugin,E:\$WINDOWS.~BT\Sources\ReplacementManifests,Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll,{43CCF250-2A74-48c6-9620-FC312EC475D6},Apartment. Will return 2[gle=0x000000cb]
    2019-12-13 12:22:28, Error                 SP     Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-Bits-Client[@version="6.1.7601.17514" and @arch="amd64" and @culture="neutral" and @context="allUsers"]/settings. Will return 2

    #### CraigM and the final 10 lines of the setuperr.log:

    2019-12-13 12:22:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!RemoveObsoleteCHSHKLMRegkey - fail to open regkey (software\Microsoft\CTF\TIP\{E429B25A-E5D3-4D1F-9BE3-0C608477E3A1}\LanguageProfile\0x00000804) = 2

    2019-12-13 12:22:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!ApplySuccess() remove HKLM Registries error
    2019-12-13 12:24:13, Error       [SetupPlatform.exe] winreHashWimFile: Failed to hash [C:\WINDOWS\System32\Recovery]: 0x5
    2019-12-13 12:31:24, Error       CBS    Failed to load Session:5704_1028796 [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2019-12-13 12:32:58, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{C939EC0F-2F56-4CE8-AF56-2336596A5FA7} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)

    2019-12-13 12:35:04, Error         SP     Could not create the service, error: 0x00000431[gle=0x00000431]
    2019-12-13 12:51:59, Error      [0x0808fe] MIG    Plugin {050ed09e-a530-41e6-8ac9-a9a96e74a2c1}: [shmig] shell\shmig\assocuserchoices.cpp(177)\shmig.dll!00007FF8A4EB9D45: (caller: 00007FF8A4EBA886) ReturnHr(1) tid(580) 80070002 The system cannot find the file specified.
        CallContext:[\AssocUserChoiceUpgrade] 

    2019-12-13 12:56:37, Error      [0x0808fe] MIG    Plugin {050ed09e-a530-41e6-8ac9-a9a96e74a2c1}: [shmig] shell\shmig\assocuserchoices.cpp(177)\shmig.dll!00007FF8A6059D45: (caller: 00007FF8A605A886) ReturnHr(1) tid(360) 80070002 The system cannot find the file specified.
        CallContext:[\AssocUserChoiceUpgrade] 

    2019-12-13 12:56:39, Error      [0x08038d] MIG    Failure while calling IPostApply->ApplySuccess for Plugin={ServerPath="%windir%\system32\migration\TileStoreMigrationPlugin.dll", CLSID={59735225-901B-4A9F-A7B6-52D7D5E0776D}, ThreadingModel=Apartment}. Error: 0x80070002

    2019-12-13 12:56:39, Error                 SP     Error READ, 0x00000002 while gathering/applying object: apply-success, Action,CMXEPlugin,C:\$WINDOWS.~BT\Work\MachineIndependent\Working\agentmgr\CCSIAgent,%windir%\system32\migration\TileStoreMigrationPlugin.dll,{59735225-901B-4A9F-A7B6-52D7D5E0776D},Apartment. Will return 2[gle=0x000000cb]

  • CraigM
    CraigM Member Posts: 14

    Tinkerer
    billsey, much thanks! The setuperr.log is about 5 pages of errors. I'm not knowledgeable enough to make sense of it, but here are the first 50 lines, down to the error that repeats after that:
    setuperr.log:
    2019-12-13 10:19:29, Error     MOUPG CSystemHelper::CheckConnectedStandby(642): Result = 0x80070057
    2019-12-13 10:21:12, Error     MOUPG  CFCAcquirerDCAT::GetCTACAttributes(652): Result = 0x8007007E[gle=0x0000007e]

    2019-12-13 10:21:22, Error      CSI    00000001 (F)STATUS_OBJECT_NAME_NOT_FOUND #10# from Windows::Rtl::SystemImplementation::DirectRegistryProvider::SysQueryValueKey(flags = 0, key = 6e4 ('\REGISTRY\MACHINE\SYSTEM\Setup'), vn = [l:7 ml:8]'Compact', kvic = 2, kvi = 2, disp = 0)[gle=0xd0000034]

    2019-12-13 10:21:22, Error      CSI    00000002 (F) STATUS_OBJECT_NAME_NOT_FOUND #9# from Windows::Rtl::SystemImplementation::CKey::QueryValue(flags = 0, kn = [l:31]'\Registry\Machine\SYSTEM\Setup\', vn = [l:7 ml:8]'Compact', ic = KeyValuePartialInformation, info = {l:0 b:}, disp = 0)[gle=0xd0000034]

    2019-12-13 10:21:27, Error      MOUPG  CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Suspend(1253): Result = 0xC1800104[gle=0x00000002]

    2019-12-13 10:21:27, Error                 MOUPG  CDlpTask::CheckUserInterruptEx(3060): Result = 0x800704D3
    2019-12-13 10:21:27, Error                 MOUPG  CDlpTask::CheckUserInterrupt(3112): Result = 0x800704D3
    2019-12-13 10:21:27, Error                 MOUPG  CSetupManager::ExecuteInstallMode(794): Result = 0x800705BB
    2019-12-13 10:21:27, Error                 MOUPG  CSetupManager::ExecuteDownlevelMode(392): Result = 0x800705BB
    2019-12-13 10:21:27, Error                 MOUPG  CSetupManager::Execute(284): Result = 0x800705BB
    2019-12-13 10:21:27, Error                 MOUPG  CSetupHost::Execute(420): Result = 0x800705BB
    2019-12-13 10:21:37, Error                 MOUPG CSystemHelper::CheckConnectedStandby(642): Result = 0x80070057
    2019-12-13 10:21:43, Error               CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
    2019-12-13 10:21:43, Error                MOUPG CDlpActionProductKeyValidate::ReportDownlevelInstallChannel(3135):
    Result = 0x8A010101
    2019-12-13 10:21:43, Error                 MOUPG  ProductKey: Failed to report Host OS channel to telemetry.
    2019-12-13 10:21:58, Error                 CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
    2019-12-13 10:22:07, Error                 MOUPG  CFCAcquirerDCAT::GetCTACAttributes(652): Result = 0x8007007E[gle=0x0000007e]
    2019-12-13 10:22:16, Error                CSI    00000001 (F) STATUS_OBJECT_NAME_NOT_FOUND #10# from Windows::Rtl::SystemImplementation::DirectRegistryProvider::SysQueryValueKey(flags = 0, key = 7a4 ('\REGISTRY\MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion'), vn = [l:25 ml:26]'CurrentMajorVersionNumber', kvic = 2, kvi = 2, disp = 0)[gle=0xd0000034]

    2019-12-13 10:22:16, Error                CSI    00000002 (F) STATUS_OBJECT_NAME_NOT_FOUND #9# from Windows::Rtl::SystemImplementation::CKey::QueryValue(flags = 0, kn = [l:63]'\Registry\Machine\SOFTWARE\Microsoft\Windows NT\CurrentVersion\', vn = [l:25 ml:26]'CurrentMajorVersionNumber', ic = KeyValuePartialInformation, info = {l:0 b:}, disp = 0)[gle=0xd0000034]

    2019-12-13 10:22:16, Error                CSI    00000003 (F) STATUS_OBJECT_NAME_NOT_FOUND #38# from Windows::Rtl::SystemImplementation::DirectRegistryProvider::SysQueryValueKey(flags = 0, key = 7a4 ('\REGISTRY\MACHINE\SYSTEM\Setup'), vn = [l:7 ml:8]'Compact', kvic = 2, kvi = 2, disp = 0)[gle=0xd0000034]

    2019-12-13 10:22:16, Error                CSI    00000004 (F) STATUS_OBJECT_NAME_NOT_FOUND #37# from Windows::Rtl::SystemImplementation::CKey::QueryValue(flags = 0, kn = [l:31]'\Registry\Machine\SYSTEM\Setup\', vn = [l:7 ml:8]'Compact', ic = KeyValuePartialInformation, info = {l:0 b:}, disp = 0)[gle=0xd0000034]

    2019-12-13 10:22:16, Error                CSI    00000005 (F) STATUS_OBJECT_NAME_NOT_FOUND #45# from Windows::Rtl::SystemImplementation::DirectRegistryProvider::SysQueryValueKey(flags = 0, key = 79c ('\REGISTRY\MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion'), vn = [l:11 ml:12]'BuildBranch', kvic = 2, kvi = 2, disp = 0)[gle=0xd0000034]

    2019-12-13 10:22:16, Error                CSI    00000006 (F) STATUS_OBJECT_NAME_NOT_FOUND #44# from Windows::Rtl::SystemImplementation::CKey::QueryValue(flags = 0, kn = [l:63]'\Registry\Machine\SOFTWARE\Microsoft\Windows NT\CurrentVersion\', vn = [l:11 ml:12]'BuildBranch', ic = KeyValuePartialInformation, info = {l:0 b:}, disp = 0)[gle=0xd0000034]

    2019-12-13 10:25:38, Error              CSI    00000007 (F) STATUS_OBJECT_NAME_NOT_FOUND #75# from Windows::Rtl::SystemImplementation::DirectRegistryProvider::SysQueryValueKey(flags = 0, key = 268 ('\REGISTRY\MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts'), vn = [l:21 ml:22]'Arial Nova (TrueType)', kvic = 2, kvi = 2, disp = 0)[gle=0xd0000034]

    2019-12-13 10:25:38, Error                CSI    00000008 (F) STATUS_OBJECT_NAME_NOT_FOUND #74# from Windows::Rtl::SystemImplementation::CKey::QueryValue(flags = 0, kn = [l:69]'\Registry\Machine\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts\', vn = [l:21 ml:22]'Arial Nova (TrueType)', ic = KeyValuePartialInformation, info = {l:0 b:}, disp = 0)[gle=0xd0000034]

    2019-12-13 10:26:49, Error                 SP     Failed to test whether this device is connected standby. Error: 0xD000000D
    2019-12-13 10:26:49, Error                 SP     Failed to test whether this device is connected standby. Error: 0xD000000D
    2019-12-13 10:26:50, Error                 DU     DU::CDUSession::BuildSearchCriteria: Caller profile search criterion is not supported. hr = 0x80070032
    2019-12-13 10:26:50, Error                 DU     DU::CDUSession::Search: Failed to build the search criteria. hr = 0x80070032
    2019-12-13 10:27:21, Error                 CONX   hDevInfo invalid handle value
    2019-12-13 10:28:32, Error                 CONX   Windows::Compat::Appraiser::AssetUtils::GetProgramNameAndRegistryPathFromFile (992):   App should have registry path, swallowing error.[gle=0x8007139f]
    2019-12-13 10:28:32, Error                 CONX   Windows::Compat::Appraiser::AssetUtils::GetProgramNameAndRegistryPathFromFile (992):   App should have registry path, swallowing error.[gle=0x8007139f]
    2019-12-13 10:28:33, Error                 SP     CNewSystem::PreInitialize: FveCheckSuspendBitLockerOnUpgrade failed: 0x8007007f, assuming auto-unlock is not supported[gle=0x0000007f]
    2019-12-13 10:28:34, Error                 SP     Failed to test whether this device is connected standby. Error: 0xD000000D[gle=0x000000cb]
    2019-12-13 10:28:34, Error                 SP     Failed to test whether this device is connected standby. Error: 0xD000000D
    2019-12-13 10:43:33, Error                 SP     CNewSystem::PreInitialize: FveCheckSuspendBitLockerOnUpgrade failed: 0x8007007f, assuming auto-unlock is not supported[gle=0x0000007f]
    2019-12-13 10:43:35, Error                 SP     SPGetReserveManager: Failed to get Update Reserve Manager. hr = 0x80070032[gle=0x0000007f]
    2019-12-13 10:43:35, Error                 SP     SPStorageReserveAvailable: Failed to get Update Reserve manager. hr = 0x80070032[gle=0x0000007f]
    2019-12-13 10:46:33, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-RasServer-MigPlugin\RasMigPlugin.dll, {D26AA4A5-92AD-48DB-8D59-95EF0DCE6939}, 0) failed, hr=[0x8007007f].
    2019-12-13 10:46:33, Error      [0x080387] MIG    Failure while calling IDiscovery->Discover for Plugin={ServerPath="Microsoft-Windows-RasServer-MigPlugin\RasMigPlugin.dll", CLSID={D26AA4A5-92AD-48DB-8D59-95EF0DCE6939}, ThreadingModel=Apartment}. Error: 0x8007007F
    2019-12-13 10:46:38, Error                 SP     FOD Validator: Failed to Get Capabilities using DISM API. Error: 80004002[gle=0x0000007a]
    2019-12-13 10:46:39, Error                 SP     FOD Validator: Failed to build FoD list, will remove validator. Error: 80004002
    2019-12-13 10:48:51, Error                 SP     pSPRemoveUpgradeRegTree: failed to delete reg tree HKLM\SYSTEM\Setup\Upgrade[gle=0x00000005]

    ### CraigM: This next set of errors (0x8007007e/7f) is repeated for about 4 pages.
    2019-12-13 10:51:22, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Printing-LocalPrinting-Replacement\APMonPortMig.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7f.[gle=0x0000007f]
     2019-12-13 10:51:22, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2019-12-13 10:51:22, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Printing-LocalPrinting-Replacement\APMonPortMig.dll, {4BC43F3F-308E-4DB9-B53B-7A31C5F9D5BD}, 0) failed, hr=[0x8007007f].
    2019-12-13 10:51:22, Error      [0x080387] MIG    Failure while calling IDiscovery->Discover for Plugin={ServerPath="Printing-LocalPrinting-Replacement\APMonPortMig.dll", CLSID={4BC43F3F-308E-4DB9-B53B-7A31C5F9D5BD}, ThreadingModel=Apartment}. Error: 0x8007007F
    2019-12-13 10:51:23, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-RasApi-Mig\pbkmigr.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7f.[gle=0x0000007f]
    2019-12-13 10:51:23, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]

    #### CraigM: Then, after 4 pages of MIG failures (0x8007007e/7f), it fails with:

    2019-12-13 10:55:30, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Client-License-Platform-Service-Migration\ClipMigPlugin.dll, {6014E67F-2537-48F9-951D-D29D720523E1}, 0) failed, hr=[0x8007007e].
    2019-12-13 10:56:02, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Unable to query {a45c254e-df1c-4efd-8020-67d146a850e0}[14] property from 'UUID:1BDDCEDA-1DD2-11B2-9D7B-FA2BFB371A42\UMB\3&28D79CBA&0&UUID:1BDDCEDA-1DD2-11B2-9D7B-FA2BFB371A42'. Error = 0x00000490
    2019-12-13 10:56:05, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Unable to query LocationPaths property from 'SCSI\CDROM&VEN_MAGICISO&PROD_VIRTUAL_DVD-ROM&REV_1.0A\1&2AFD7D61&0&0000'. Error = 0x0000000D
    2019-12-13 10:56:07, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Unable to determine inbox status of driver 'netavpna.inf' for 'ROOT\MS_AGILEVPNMINIPORT\0000'. Error = 0x00000490
    2019-12-13 10:56:07, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Unable to determine inbox status of driver 'netrasa.inf' for 'ROOT\MS_L2TPMINIPORT\0000'. Error = 0x00000490

    #### CraigM with 6 more similar errors 0x0808fe & 0x00000490.
    #### CraigM Then with:

     Msg:[Migrated key for Path $OFFLINE_RW_2D8F1358$SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\PropertySystem\PropertySchema.Migrated for 32-bit hive not found ] 

    2019-12-13 11:58:02, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!RemoveObsoleteCHSHKLMRegkey - fail to open regkey (software\Microsoft\CTF\TIP\{E429B25A-E5D3-4D1F-9BE3-0C608477E3A1}\LanguageProfile\0x00000804@contishot

    2019-12-13 11:58:02, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!ApplySuccess() remove HKLM Registries error
    2019-12-13 11:58:02, Error      [0x08038d] MIG    Failure while calling IPostApply->ApplySuccess for Plugin={ServerPath="Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll", CLSID={43CCF250-2A74-48c6-9620-FC312EC475D6}, ThreadingModel=Apartment}. Error: 0x80070002
    2019-12-13 11:58:02, Error                 SP     Error READ, 0x00000002 while gathering/applying object: apply-success, Action,CMXEPlugin,E:\$WINDOWS.~BT\Sources\ReplacementManifests,Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll,{43CCF250-2A74-48c6-9620-FC312EC475D6},Apartment. Will return 2[gle=0x000000cb]
    2019-12-13 12:22:28, Error                 SP     Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-Bits-Client[@version="6.1.7601.17514" and @arch="amd64" and @culture="neutral" and @context="allUsers"]/settings. Will return 2

    #### CraigM and the final 10 lines of the setuperr.log:

    2019-12-13 12:22:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!RemoveObsoleteCHSHKLMRegkey - fail to open regkey (software\Microsoft\CTF\TIP\{E429B25A-E5D3-4D1F-9BE3-0C608477E3A1}\LanguageProfile\0x00000804) = 2

    2019-12-13 12:22:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!ApplySuccess() remove HKLM Registries error
    2019-12-13 12:24:13, Error       [SetupPlatform.exe] winreHashWimFile: Failed to hash [C:\WINDOWS\System32\Recovery]: 0x5
    2019-12-13 12:31:24, Error       CBS    Failed to load Session:5704_1028796 [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2019-12-13 12:32:58, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{C939EC0F-2F56-4CE8-AF56-2336596A5FA7} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)

    2019-12-13 12:35:04, Error         SP     Could not create the service, error: 0x00000431[gle=0x00000431]
    2019-12-13 12:51:59, Error      [0x0808fe] MIG    Plugin {050ed09e-a530-41e6-8ac9-a9a96e74a2c1}: [shmig] shell\shmig\assocuserchoices.cpp(177)\shmig.dll!00007FF8A4EB9D45: (caller: 00007FF8A4EBA886) ReturnHr(1) tid(580) 80070002 The system cannot find the file specified.
        CallContext:[\AssocUserChoiceUpgrade] 

    2019-12-13 12:56:37, Error      [0x0808fe] MIG    Plugin {050ed09e-a530-41e6-8ac9-a9a96e74a2c1}: [shmig] shell\shmig\assocuserchoices.cpp(177)\shmig.dll!00007FF8A6059D45: (caller: 00007FF8A605A886) ReturnHr(1) tid(360) 80070002 The system cannot find the file specified.
        CallContext:[\AssocUserChoiceUpgrade] 

    2019-12-13 12:56:39, Error      [0x08038d] MIG    Failure while calling IPostApply->ApplySuccess for Plugin={ServerPath="%windir%\system32\migration\TileStoreMigrationPlugin.dll", CLSID={59735225-901B-4A9F-A7B6-52D7D5E0776D}, ThreadingModel=Apartment}. Error: 0x80070002

    2019-12-13 12:56:39, Error                 SP     Error READ, 0x00000002 while gathering/applying object: apply-success, Action,CMXEPlugin,C:\$WINDOWS.~BT\Work\MachineIndependent\Working\agentmgr\CCSIAgent,%windir%\system32\migration\TileStoreMigrationPlugin.dll,{59735225-901B-4A9F-A7B6-52D7D5E0776D},Apartment. Will return 2[gle=0x000000cb]

  • CraigM
    CraigM Member Posts: 14

    Tinkerer
    Hi Billsey,
    Ran the install two times with what appears to be identical results in the setuperr.txt and setupact.txt files. It still fails. The first time I ran it, I removed the printer cable. The second time I ran it, I removed even the keyboard cable, so that the only cable connected was the internet cable. So, unless you can think of anything else, I guess I'm just out of luck with this Z5700, and I assume I will have to stay with Windows 7.
  • StevenGen
    StevenGen ACE Posts: 12,165 Trailblazer
    edited December 2019
    CraigM said:
    Hi Billsey,
    Ran the install two times with what appears to be identical results in the setuperr.txt and setupact.txt files. It still fails. The first time I ran it, I removed the printer cable. The second time I ran it, I removed even the keyboard cable, so that the only cable connected was the internet cable. So, unless you can think of anything else, I guess I'm just out of luck with this Z5700, and I assume I will have to stay with Windows 7.

    The best thing that you can do is to do a clean install of Windows 10, backup all your Windows 7 files and then do a clean install. If you can get into your Windows 7 and the internet? Then, download MCT (media creation tool) for Windows 10 from here: https://www.microsoft.com/en-us/software-download/windows10 if you can't, then, use another computer to download MCT (media creation tool) for Windows 10 to a bootable USB thumb drive through MCT (see the 5 captions of this setup, that I've included below) this will install Windows 10 64bit v1903, OS build 18362.418 through the bootable USB thumb drive. Btw, the latest Windows 10 is the v1909 OS build 18363.535, so and after you install Windows 10, use "Windows Update" to get your system to the latest v1909 OS build 18363.535.

    Now, get into the Z5700 BIOS and change the boot to USB option, make sure you have a Microsoft account e.g. Hotmail etc and make a note of your Z5700 Windows 7 key, reboot into Windows 10 setup and go through Windows 10 setup process and enter the Z5700 Windows 7 key, which should activate the Windows 10 to the “Windows is activated with a digital license linked to your Microsoft account”, simple!


    1.JPG 26.9K
    2.JPG 87.7K
    3.JPG 35.8K
    5.JPG 38.6K
  • billsey
    billsey ACE Posts: 34,234 Trailblazer
    I wasn't able to dig anything out of Microsoft as to no longer supporting the early 1st gen CPUs, they had dropped support for the Atom processor that were actually newer than yours, but they've been silent on the more mainstream ones. It looks like the first bunch of errors are all dealing with connected standby, which is a function of the sleep modes the processor and chipset can handle. It's possible that we're doing just what you were afraid of, running into the lower limit for Windows 10 processor support. As SteveGen suggests you might have better luck with a clean install than with an upgrade, but a clean install also means a full reinstall of your applications. It's likely to be time for a good look at what your needs are. If you can replace the system within the next couple of years go ahead and leave it with W7 and plan on upgrading the hardware at the same time as the OS gets current. If that's not going to be in the cards, do the full backup, including the recovery image/disc, and after it's successful try the clean install. If it works you'll finally be able to pare your list of applications down a bit by only reinstalling the important ones. :)
    Hmm, I've got a really, really old Thinkpad here, I wonder if I can install the 32 bit W10 on it? :)
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • CraigM
    CraigM Member Posts: 14

    Tinkerer
    billsey, much thanks! The setuperr.log is about 5 pages of errors. I'm not knowledgeable enough to make sense of it, but here are the first 50 lines, down to the error that repeats after that:
    setuperr.log:
    2019-12-13 10:19:29, Error     MOUPG CSystemHelper::CheckConnectedStandby(642): Result = 0x80070057
    2019-12-13 10:21:12, Error     MOUPG  CFCAcquirerDCAT::GetCTACAttributes(652): Result = 0x8007007E[gle=0x0000007e]

    2019-12-13 10:21:22, Error      CSI    00000001 (F)STATUS_OBJECT_NAME_NOT_FOUND #10# from Windows::Rtl::SystemImplementation::DirectRegistryProvider::SysQueryValueKey(flags = 0, key = 6e4 ('\REGISTRY\MACHINE\SYSTEM\Setup'), vn = [l:7 ml:8]'Compact', kvic = 2, kvi = 2, disp = 0)[gle=0xd0000034]

    2019-12-13 10:21:22, Error      CSI    00000002 (F) STATUS_OBJECT_NAME_NOT_FOUND #9# from Windows::Rtl::SystemImplementation::CKey::QueryValue(flags = 0, kn = [l:31]'\Registry\Machine\SYSTEM\Setup\', vn = [l:7 ml:8]'Compact', ic = KeyValuePartialInformation, info = {l:0 b:}, disp = 0)[gle=0xd0000034]

    2019-12-13 10:21:27, Error      MOUPG  CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Suspend(1253): Result = 0xC1800104[gle=0x00000002]

    2019-12-13 10:21:27, Error                 MOUPG  CDlpTask::CheckUserInterruptEx(3060): Result = 0x800704D3
    2019-12-13 10:21:27, Error                 MOUPG  CDlpTask::CheckUserInterrupt(3112): Result = 0x800704D3
    2019-12-13 10:21:27, Error                 MOUPG  CSetupManager::ExecuteInstallMode(794): Result = 0x800705BB
    2019-12-13 10:21:27, Error                 MOUPG  CSetupManager::ExecuteDownlevelMode(392): Result = 0x800705BB
    2019-12-13 10:21:27, Error                 MOUPG  CSetupManager::Execute(284): Result = 0x800705BB
    2019-12-13 10:21:27, Error                 MOUPG  CSetupHost::Execute(420): Result = 0x800705BB
    2019-12-13 10:21:37, Error                 MOUPG CSystemHelper::CheckConnectedStandby(642): Result = 0x80070057
    2019-12-13 10:21:43, Error               CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
    2019-12-13 10:21:43, Error                MOUPG CDlpActionProductKeyValidate::ReportDownlevelInstallChannel(3135):
    Result = 0x8A010101
    2019-12-13 10:21:43, Error                 MOUPG  ProductKey: Failed to report Host OS channel to telemetry.
    2019-12-13 10:21:58, Error                 CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
    2019-12-13 10:22:07, Error                 MOUPG  CFCAcquirerDCAT::GetCTACAttributes(652): Result = 0x8007007E[gle=0x0000007e]
    2019-12-13 10:22:16, Error                CSI    00000001 (F) STATUS_OBJECT_NAME_NOT_FOUND #10# from Windows::Rtl::SystemImplementation::DirectRegistryProvider::SysQueryValueKey(flags = 0, key = 7a4 ('\REGISTRY\MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion'), vn = [l:25 ml:26]'CurrentMajorVersionNumber', kvic = 2, kvi = 2, disp = 0)[gle=0xd0000034]

    2019-12-13 10:22:16, Error                CSI    00000002 (F) STATUS_OBJECT_NAME_NOT_FOUND #9# from Windows::Rtl::SystemImplementation::CKey::QueryValue(flags = 0, kn = [l:63]'\Registry\Machine\SOFTWARE\Microsoft\Windows NT\CurrentVersion\', vn = [l:25 ml:26]'CurrentMajorVersionNumber', ic = KeyValuePartialInformation, info = {l:0 b:}, disp = 0)[gle=0xd0000034]

    2019-12-13 10:22:16, Error                CSI    00000003 (F) STATUS_OBJECT_NAME_NOT_FOUND #38# from Windows::Rtl::SystemImplementation::DirectRegistryProvider::SysQueryValueKey(flags = 0, key = 7a4 ('\REGISTRY\MACHINE\SYSTEM\Setup'), vn = [l:7 ml:8]'Compact', kvic = 2, kvi = 2, disp = 0)[gle=0xd0000034]

    2019-12-13 10:22:16, Error                CSI    00000004 (F) STATUS_OBJECT_NAME_NOT_FOUND #37# from Windows::Rtl::SystemImplementation::CKey::QueryValue(flags = 0, kn = [l:31]'\Registry\Machine\SYSTEM\Setup\', vn = [l:7 ml:8]'Compact', ic = KeyValuePartialInformation, info = {l:0 b:}, disp = 0)[gle=0xd0000034]

    2019-12-13 10:22:16, Error                CSI    00000005 (F) STATUS_OBJECT_NAME_NOT_FOUND #45# from Windows::Rtl::SystemImplementation::DirectRegistryProvider::SysQueryValueKey(flags = 0, key = 79c ('\REGISTRY\MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion'), vn = [l:11 ml:12]'BuildBranch', kvic = 2, kvi = 2, disp = 0)[gle=0xd0000034]

    2019-12-13 10:22:16, Error                CSI    00000006 (F) STATUS_OBJECT_NAME_NOT_FOUND #44# from Windows::Rtl::SystemImplementation::CKey::QueryValue(flags = 0, kn = [l:63]'\Registry\Machine\SOFTWARE\Microsoft\Windows NT\CurrentVersion\', vn = [l:11 ml:12]'BuildBranch', ic = KeyValuePartialInformation, info = {l:0 b:}, disp = 0)[gle=0xd0000034]

    2019-12-13 10:25:38, Error              CSI    00000007 (F) STATUS_OBJECT_NAME_NOT_FOUND #75# from Windows::Rtl::SystemImplementation::DirectRegistryProvider::SysQueryValueKey(flags = 0, key = 268 ('\REGISTRY\MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts'), vn = [l:21 ml:22]'Arial Nova (TrueType)', kvic = 2, kvi = 2, disp = 0)[gle=0xd0000034]

    2019-12-13 10:25:38, Error                CSI    00000008 (F) STATUS_OBJECT_NAME_NOT_FOUND #74# from Windows::Rtl::SystemImplementation::CKey::QueryValue(flags = 0, kn = [l:69]'\Registry\Machine\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts\', vn = [l:21 ml:22]'Arial Nova (TrueType)', ic = KeyValuePartialInformation, info = {l:0 b:}, disp = 0)[gle=0xd0000034]

    2019-12-13 10:26:49, Error                 SP     Failed to test whether this device is connected standby. Error: 0xD000000D
    2019-12-13 10:26:49, Error                 SP     Failed to test whether this device is connected standby. Error: 0xD000000D
    2019-12-13 10:26:50, Error                 DU     DU::CDUSession::BuildSearchCriteria: Caller profile search criterion is not supported. hr = 0x80070032
    2019-12-13 10:26:50, Error                 DU     DU::CDUSession::Search: Failed to build the search criteria. hr = 0x80070032
    2019-12-13 10:27:21, Error                 CONX   hDevInfo invalid handle value
    2019-12-13 10:28:32, Error                 CONX   Windows::Compat::Appraiser::AssetUtils::GetProgramNameAndRegistryPathFromFile (992):   App should have registry path, swallowing error.[gle=0x8007139f]
    2019-12-13 10:28:32, Error                 CONX   Windows::Compat::Appraiser::AssetUtils::GetProgramNameAndRegistryPathFromFile (992):   App should have registry path, swallowing error.[gle=0x8007139f]
    2019-12-13 10:28:33, Error                 SP     CNewSystem::PreInitialize: FveCheckSuspendBitLockerOnUpgrade failed: 0x8007007f, assuming auto-unlock is not supported[gle=0x0000007f]
    2019-12-13 10:28:34, Error                 SP     Failed to test whether this device is connected standby. Error: 0xD000000D[gle=0x000000cb]
    2019-12-13 10:28:34, Error                 SP     Failed to test whether this device is connected standby. Error: 0xD000000D
    2019-12-13 10:43:33, Error                 SP     CNewSystem::PreInitialize: FveCheckSuspendBitLockerOnUpgrade failed: 0x8007007f, assuming auto-unlock is not supported[gle=0x0000007f]
    2019-12-13 10:43:35, Error                 SP     SPGetReserveManager: Failed to get Update Reserve Manager. hr = 0x80070032[gle=0x0000007f]
    2019-12-13 10:43:35, Error                 SP     SPStorageReserveAvailable: Failed to get Update Reserve manager. hr = 0x80070032[gle=0x0000007f]
    2019-12-13 10:46:33, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-RasServer-MigPlugin\RasMigPlugin.dll, {D26AA4A5-92AD-48DB-8D59-95EF0DCE6939}, 0) failed, hr=[0x8007007f].
    2019-12-13 10:46:33, Error      [0x080387] MIG    Failure while calling IDiscovery->Discover for Plugin={ServerPath="Microsoft-Windows-RasServer-MigPlugin\RasMigPlugin.dll", CLSID={D26AA4A5-92AD-48DB-8D59-95EF0DCE6939}, ThreadingModel=Apartment}. Error: 0x8007007F
    2019-12-13 10:46:38, Error                 SP     FOD Validator: Failed to Get Capabilities using DISM API. Error: 80004002[gle=0x0000007a]
    2019-12-13 10:46:39, Error                 SP     FOD Validator: Failed to build FoD list, will remove validator. Error: 80004002
    2019-12-13 10:48:51, Error                 SP     pSPRemoveUpgradeRegTree: failed to delete reg tree HKLM\SYSTEM\Setup\Upgrade[gle=0x00000005]

    ### CraigM: This next set of errors (0x8007007e/7f) is repeated for about 4 pages.
    2019-12-13 10:51:22, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Printing-LocalPrinting-Replacement\APMonPortMig.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7f.[gle=0x0000007f]
     2019-12-13 10:51:22, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2019-12-13 10:51:22, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Printing-LocalPrinting-Replacement\APMonPortMig.dll, {4BC43F3F-308E-4DB9-B53B-7A31C5F9D5BD}, 0) failed, hr=[0x8007007f].
    2019-12-13 10:51:22, Error      [0x080387] MIG    Failure while calling IDiscovery->Discover for Plugin={ServerPath="Printing-LocalPrinting-Replacement\APMonPortMig.dll", CLSID={4BC43F3F-308E-4DB9-B53B-7A31C5F9D5BD}, ThreadingModel=Apartment}. Error: 0x8007007F
    2019-12-13 10:51:23, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-RasApi-Mig\pbkmigr.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7f.[gle=0x0000007f]
    2019-12-13 10:51:23, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]

    #### CraigM: Then, after 4 pages of MIG failures (0x8007007e/7f), it fails with:

    2019-12-13 10:55:30, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Client-License-Platform-Service-Migration\ClipMigPlugin.dll, {6014E67F-2537-48F9-951D-D29D720523E1}, 0) failed, hr=[0x8007007e].
    2019-12-13 10:56:02, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Unable to query {a45c254e-df1c-4efd-8020-67d146a850e0}[14] property from 'UUID:1BDDCEDA-1DD2-11B2-9D7B-FA2BFB371A42\UMB\3&28D79CBA&0&UUID:1BDDCEDA-1DD2-11B2-9D7B-FA2BFB371A42'. Error = 0x00000490
    2019-12-13 10:56:05, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Unable to query LocationPaths property from 'SCSI\CDROM&VEN_MAGICISO&PROD_VIRTUAL_DVD-ROM&REV_1.0A\1&2AFD7D61&0&0000'. Error = 0x0000000D
    2019-12-13 10:56:07, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Unable to determine inbox status of driver 'netavpna.inf' for 'ROOT\MS_AGILEVPNMINIPORT\0000'. Error = 0x00000490
    2019-12-13 10:56:07, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Unable to determine inbox status of driver 'netrasa.inf' for 'ROOT\MS_L2TPMINIPORT\0000'. Error = 0x00000490

    #### CraigM with 6 more similar errors 0x0808fe & 0x00000490.
    #### CraigM Then with:

     Msg:[Migrated key for Path $OFFLINE_RW_2D8F1358$SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\PropertySystem\PropertySchema.Migrated for 32-bit hive not found ] 

    2019-12-13 11:58:02, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!RemoveObsoleteCHSHKLMRegkey - fail to open regkey (software\Microsoft\CTF\TIP\{E429B25A-E5D3-4D1F-9BE3-0C608477E3A1}\LanguageProfile\0x00000804@contishot

    2019-12-13 11:58:02, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!ApplySuccess() remove HKLM Registries error
    2019-12-13 11:58:02, Error      [0x08038d] MIG    Failure while calling IPostApply->ApplySuccess for Plugin={ServerPath="Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll", CLSID={43CCF250-2A74-48c6-9620-FC312EC475D6}, ThreadingModel=Apartment}. Error: 0x80070002
    2019-12-13 11:58:02, Error                 SP     Error READ, 0x00000002 while gathering/applying object: apply-success, Action,CMXEPlugin,E:\$WINDOWS.~BT\Sources\ReplacementManifests,Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll,{43CCF250-2A74-48c6-9620-FC312EC475D6},Apartment. Will return 2[gle=0x000000cb]
    2019-12-13 12:22:28, Error                 SP     Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-Bits-Client[@version="6.1.7601.17514" and @arch="amd64" and @culture="neutral" and @context="allUsers"]/settings. Will return 2

    #### CraigM and the final 10 lines of the setuperr.log:

    2019-12-13 12:22:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!RemoveObsoleteCHSHKLMRegkey - fail to open regkey (software\Microsoft\CTF\TIP\{E429B25A-E5D3-4D1F-9BE3-0C608477E3A1}\LanguageProfile\0x00000804) = 2

    2019-12-13 12:22:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!ApplySuccess() remove HKLM Registries error
    2019-12-13 12:24:13, Error       [SetupPlatform.exe] winreHashWimFile: Failed to hash [C:\WINDOWS\System32\Recovery]: 0x5
    2019-12-13 12:31:24, Error       CBS    Failed to load Session:5704_1028796 [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2019-12-13 12:32:58, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{C939EC0F-2F56-4CE8-AF56-2336596A5FA7} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)

    2019-12-13 12:35:04, Error         SP     Could not create the service, error: 0x00000431[gle=0x00000431]
    2019-12-13 12:51:59, Error      [0x0808fe] MIG    Plugin {050ed09e-a530-41e6-8ac9-a9a96e74a2c1}: [shmig] shell\shmig\assocuserchoices.cpp(177)\shmig.dll!00007FF8A4EB9D45: (caller: 00007FF8A4EBA886) ReturnHr(1) tid(580) 80070002 The system cannot find the file specified.
        CallContext:[\AssocUserChoiceUpgrade] 

    2019-12-13 12:56:37, Error      [0x0808fe] MIG    Plugin {050ed09e-a530-41e6-8ac9-a9a96e74a2c1}: [shmig] shell\shmig\assocuserchoices.cpp(177)\shmig.dll!00007FF8A6059D45: (caller: 00007FF8A605A886) ReturnHr(1) tid(360) 80070002 The system cannot find the file specified.
        CallContext:[\AssocUserChoiceUpgrade] 

    2019-12-13 12:56:39, Error      [0x08038d] MIG    Failure while calling IPostApply->ApplySuccess for Plugin={ServerPath="%windir%\system32\migration\TileStoreMigrationPlugin.dll", CLSID={59735225-901B-4A9F-A7B6-52D7D5E0776D}, ThreadingModel=Apartment}. Error: 0x80070002

    2019-12-13 12:56:39, Error                 SP     Error READ, 0x00000002 while gathering/applying object: apply-success, Action,CMXEPlugin,C:\$WINDOWS.~BT\Work\MachineIndependent\Working\agentmgr\CCSIAgent,%windir%\system32\migration\TileStoreMigrationPlugin.dll,{59735225-901B-4A9F-A7B6-52D7D5E0776D},Apartment. Will return 2[gle=0x000000cb]

  • CraigM
    CraigM Member Posts: 14

    Tinkerer
    Hi billsey, please ignore the above comment, posted at 9:57am today. It was left laying around, and I posted it, thinking it was the means to respond to your December 19 post.

    I very much appreciate your effort to look into this problem. At least I know what I have to do if I really want to go to the effort. I do have a Surface Pro 4 with Windows 10, but it's not as nice as this desktop with the wide screen. So, I'm just going to stay with the Windows 7 on my Acer for now. 

    Thanks again!
  • billsey
    billsey ACE Posts: 34,234 Trailblazer
    OK, this is a cut'n'paste from the Microsoft forum with a possibility. I believe the key here is to make sure W7 can complete all it's updates before the upgrade install.
    Try manually reset the Windows Updates Components once again and then reinitiate the Windows Update process.

    Resetting Windows Update Components will fix corrupt Windows Update Components and help you to install the Windows Updates quickly. 

    Please follow the below steps to reset the Windows Updates Components:

    1. Press Windows Key + X on the keyboard and then select “Command Prompt (Admin)” from the menu.

    2. Stop the BITS, Cryptographic, MSI Installer and the Windows Update Services. To do this, type the following commands at a command prompt. Press the “ENTER” key after you type each command.

                               net stop wuauserv

                               net stop cryptSvc

                               net stop bits

                               net stop msiserver

    3. Now rename the SoftwareDistribution and Catroot2 folder. You can do this by typing the following commands in the Command Prompt. Press the “ENTER” key after you type each command.

                              ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

                              ren C:\Windows\System32\catroot2 Catroot2.old

    4. Now, let’s restart the BITS, Cryptographic, MSI Installer and the Windows Update Services. Type the following commands in the Command Prompt for this. Press the ENTER key after you type each command.

                            net start wuauserv

                            net start cryptSvc

                            net start bits

                            net start msiserver

    5. Type Exit in the Command Prompt to close it and then restart the computer.

    6.After restarting the computer, now retry to install Windows Updates.

    Also refer: How to: A list of things to do if Windows 10 Setup fails.

    http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_install/how-to-a-list-of-things-to-do-if-windows-10-setup/eba3c864-d9fe-4f8e-9468-81b1f89473ed

    See for further reference: http://windows.microsoft.com/en-us/windows-10/upgrade-install-errors-windows-10

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • CraigM
    CraigM Member Posts: 14

    Tinkerer
    Hi billsey, just a question or two: 
    At first blush, it looks like I would wait until the install hangs at 85% to do the above, but then I'm questioning how I would do a simple restart. However, maybe the above steps are intended to be done at the prompt after it downloads the updates and before it begins to process the updates?
  • billsey
    billsey ACE Posts: 34,234 Trailblazer
    Those steps are done with Windows 7 up and running, before trying to restart the update process. They are targeted at getting the Windows 7 install as clean as possible before the Windows 10 upgrade starts. Hopefully they'll get you past that 85% hang and on to finish correctly.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • CraigM
    CraigM Member Posts: 14

    Tinkerer
    Hi billsey, I'm afraid it failed in the same original manner: Black screen at 85% and locked up at 88%. Just to be clear, I want to give you the steps I took:
    1. Started Windows 10 Install.
    2. Waited for prompt that occurs after gathering all update files.
    3. Performed steps 1-4 above, successfully.
    4. In step 5, I exited Command Prompt, but just resumed the Windows 10 Install. I did not do a 'restart' of the computer. So, in effect, I did not do step 6.
    I noticed just one anomaly, when I re-started BITS, it said it was already running. I can't remember/verify that it said it stopped successfully when I stopped it, but I thought all responses were good when I stopped all four processes.
  • StevenGen
    StevenGen ACE Posts: 12,165 Trailblazer
    What is the exact model of your T5700? Has it got the 3.2GHz Intel Core i5 650 and 4Gb RAM? If you want to do an upgrade there are allot of variables that Win-7 stops you from upgrading, as I suggested, forget about and upgrade from Win-7 to 10 and do a clean install, do a backup of your 7 and start again. If you persist and fail then, I suggest that you keep your Win-7! Btw, the Aspire T5700 (as you persist sticking with it) can be made into quite an efficient all in one to run Win-10 by upgrading the CPU putting an SSD and upgrading the RAM to 8GB but, that is another story lol
  • billsey
    billsey ACE Posts: 34,234 Trailblazer
    OK, try it again by booting into Windows 7 first, then run Windows Update to make sure there's nothing queued. Do the steps once there are no updates found and the system has been rebooted if any were installed. Only after the steps have been performed do you start the W10 install. If it still hangs then you're likely either stuck with W7 or will have to wipe to install W10. If the clean W10 install works it was a left-over driver. If it hangs even on a clean install it's a hardware conflict.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • CraigM
    CraigM Member Posts: 14

    Tinkerer
    billsey, there is a catch 22 situation with installing all upgrades and performing the 6 steps outlined in your Dec. 20 post. The 2 optional upgrades remaining are MS Security Essentials, and once installed, they deny access to rename the files in the Windows environment. So, I had to proceed without installing the 2 optional Security upgrades. It fails in the same manner.
    My next step is to look at doing a clean install. I can do one from a version that MS support downloaded onto my Acer, under Users/Craig, but I'm in process of downloading the W10 install file onto a new thumb drive. My only concern at this point is not being able to install my 2010 office suite, as I don't want to move to the office 365 and pay annual fees. But I did, just that, on my Surface Pro 4 with W10 and it didn't complain. So, I may be ok.
  • CraigM
    CraigM Member Posts: 14

    Tinkerer
    Success! I used the same W10 setup file on my computer that MS Support downloaded for me, and the one I have been using during this trouble-shooting process. The only difference is that I opted to preserve my files only, and not my apps. It still had several places where it would black screen, but it got past the 88% lock up, and finally completed the install. When it black screened, I just manually shut it down, and powered back up. I'd say that happened five times, but I have been able to install Office 2010, verify Word and Power Point, and install and verify a Bible search program. So, I'm still piecing things back together, but I'm happy so far.
  • billsey
    billsey ACE Posts: 34,234 Trailblazer
    Yes, if your Office 2010 was a retail version then the license allows you to remove it from one computer in order to install it on a different one.
    BTW, I did give it a try with that old, old Thinkpad (originally came with XP) and no joy. I was able to get W7 running on it, but every attempt at W10 failed with blue screens when trying to initialize drivers. So there is one at least that can't be updated. :( I do have a couple of Dell laptops from 2006 that are running W10 just fine, so it's not every old system that breaks. :)
    My oldest Acer is a W700 tablet and it runs W10, eight years old and counting.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.

Categories