please help asap intermittent Keyboard flickering with ph315-51-76wv

Salah718
Salah718 Member Posts: 5

Tinkerer

edited November 2023 in 2019 Archives
hello everyone so i got acer predator helios 300 about a month and a half ago and last night when i was done gaming i turned off my laptop and went to sleep the next day i wake i try turn on my laptop but it doesnt work sometimes the keyboard flickers and sometimes not when i press the power button and also my indicators are lit like when i put in the ac adapter it shows that on my indicator and when i press the power button my other indicator lights up for 2 seconds the goes off again does anyone know how i can fix this issue please help 😢

model: ph315-51-76wv (60 refresh rate)

(also i overclocked the monitor from 60 hz to 75 could that be the cause of the problem??)

this video is similar to my problem for anyone who couldnt understand cuz my english is bad : https://youtu.be/f2Y_D_nAZD0

Answers

  • Ishy
    Ishy Member Posts: 143 Skilled Fixer WiFi Icon
    Hi, @Salah718Try to do battery reset. Follow the steps below:
    1) Unplug power cable from device.
    2) Close the lid if open then flip it upside down. 
    3) Find small symbol for battery and next to it there should be a small pin hole. 
    4) Use a paperclip or something smaller to press and hold for 10-15 seconds.
    5) Then turn on the device and test if it boots.
  • Salah718
    Salah718 Member Posts: 5

    Tinkerer

    Ishy said:
    Hi, @Salah718Try to do battery reset. Follow the steps below:
    1) Unplug power cable from device.
    2) Close the lid if open then flip it upside down. 
    3) Find small symbol for battery and next to it there should be a small pin hole. 
    4) Use a paperclip or something smaller to press and hold for 10-15 seconds.
    5) Then turn on the device and test if it boots.
    hey thanks for the help, tried that but it doesnt seem to work
  • sri369
    sri369 ACE Posts: 2,774 Pathfinder
    Salah718 said:
    also i overclocked the monitor from 60 hz to 75 could that be the cause of the problem??)
    Pushing a screen into unsupported refresh rate causes issues.

    Try connecting an external display and divert all display output to it, and then try resetting your refresh rate back.
    -----
    Karma...
    LIKE - if helpful
    ACCEPT - if helped resolve
  • xapim
    xapim ACE Posts: 7,253 Pathfinder
    edited October 2019
    Salah718 why did you overclocked your display do you know theres no reverting back after you had done it and the lifespan of the display will have a huge decrease as @sri369 stated above if an external display would be working fine and your display isnt you have damaged it the point here is you never overclock a 60hz display you upgrade to a 120hz or 144hz if supported but overclocking it never it will not give you any advantage/gain in doing so either as as i said its irreversible the damage is done


    https://www.userbenchmark.com/UserRun/11532543

    UserBenchmarks: Game 43%, Desk 61%, Work 40%
    CPU: Intel Core i5-7300HQ - 63.5%
    GPU: Nvidia GTX 1050-Ti (Mobile) - 41.9%
    SSD: WDC WDS200T2B0B-00YS70 2TB - 71.4%
    HDD: WD WD10SPZX-00HKTT0 1TB - 93.7%
    RAM: Kingston HyperX DDR4 2666 C15 2x16GB - 76.8%
    MBD: Acer Predator G3-572

    I'm not an Acer employee. (just here to help in the best way i can)
    If my answer fixed you issue please accept it for any other users who search for it would find it quickly thanks :)
    If you want to learn more about undervolting/optimizing windows join the Predator fb group and youtube channel:

    Owner/Admin (HOTEL HERO/Red-Sand/Opoka Opoka)
    https://www.facebook.com/groups/PredatorHelios300
    https://www.youtube.com/channel/UCNJwGUHxSJ8FKqAhnOqQuAw
    Acer support:
    https://www.acer.com/ac/en/US/content/service-contact
    http://www.acer.com/worldwide/support/  


  • Salah718
    Salah718 Member Posts: 5

    Tinkerer


    Pushing a screen into unsupported refresh rate causes issues.

    Try connecting an external display and divert all display output to it, and then try resetting your refresh rate back.
    i didn't overclock the monitor for a while i just overclocked it for 2 days so i dont get it even if my monitor was damaged why does my keyboard not turn on ??? it blinks sometimes and sometimes it doesn't and also there would be some backlight seen if the monitor was damaged but there wasn't any.
  • Salah718
    Salah718 Member Posts: 5

    Tinkerer

    xapim said:
    Salah718 why did you overclocked your display do you know theres no reverting back after you had done it and the lifespan of the display will have a huge decrease as @sri369 stated above if an external display would be working fine and your display isnt you have damaged it the point here is you never overclock a 60hz display you upgrade to a 120hz or 144hz if supported but overclocking it never it will not give you any advantage/gain in doing so either as as i said its irreversible the damage is done
    i tried to connect to external display yesterday again the computer it self does not turn on if it turns on it would display it on the external display. any way i will try that again today when i get back from work
  • xapim
    xapim ACE Posts: 7,253 Pathfinder
    edited October 2019
    Salah718 can u access the bios ? F2 on boot or the acer stock recovery ALT+F10 if so you could try a stock recovery if you cant access the bios at all i would try a battery power drain to see if after you can access the bios to reset setup to defaults if you still cant after this procedure (and you dont have any warranty seals ) if have any knowledge of how to disassemble a laptop and perform a cmos reset you could also try that (theres no guarantee it will solve your issue) but if youre still on warranty and you have warranty seals send it back to get it repaired but bare in mind that if the issue is the display and they find out that you overclocked it (as they probably will) the warranty will not cover it


    https://www.userbenchmark.com/UserRun/11532543

    UserBenchmarks: Game 43%, Desk 61%, Work 40%
    CPU: Intel Core i5-7300HQ - 63.5%
    GPU: Nvidia GTX 1050-Ti (Mobile) - 41.9%
    SSD: WDC WDS200T2B0B-00YS70 2TB - 71.4%
    HDD: WD WD10SPZX-00HKTT0 1TB - 93.7%
    RAM: Kingston HyperX DDR4 2666 C15 2x16GB - 76.8%
    MBD: Acer Predator G3-572

    I'm not an Acer employee. (just here to help in the best way i can)
    If my answer fixed you issue please accept it for any other users who search for it would find it quickly thanks :)
    If you want to learn more about undervolting/optimizing windows join the Predator fb group and youtube channel:

    Owner/Admin (HOTEL HERO/Red-Sand/Opoka Opoka)
    https://www.facebook.com/groups/PredatorHelios300
    https://www.youtube.com/channel/UCNJwGUHxSJ8FKqAhnOqQuAw
    Acer support:
    https://www.acer.com/ac/en/US/content/service-contact
    http://www.acer.com/worldwide/support/  


  • Salah718
    Salah718 Member Posts: 5

    Tinkerer

    xapim said:
    Salah718 can u access the bios ? F2 on boot or the acer stock recovery ALT+F10 if so you could try a stock recovery if you cant access the bios at all i would try a battery power drain to see if after you can access the bios to reset setup to defaults if you still cant after this procedure (and you dont have any warranty seals ) if have any knowledge of how to disassemble a laptop and perform a cmos reset you could also try that (theres no guarantee it will solve your issue) but if youre still on warranty and you have warranty seals send it back to get it repaired but bare in mind that if the issue is the display and they find out that you overclocked it (as they probably will) the warranty will not cover it
    yeah sure i will try doing that as soon as i get home rn im in work lol so i cant, i will tell u if it works.
  • xapim
    xapim ACE Posts: 7,253 Pathfinder
    Salah718 good luck hope it works fine one way or the other :)


    https://www.userbenchmark.com/UserRun/11532543

    UserBenchmarks: Game 43%, Desk 61%, Work 40%
    CPU: Intel Core i5-7300HQ - 63.5%
    GPU: Nvidia GTX 1050-Ti (Mobile) - 41.9%
    SSD: WDC WDS200T2B0B-00YS70 2TB - 71.4%
    HDD: WD WD10SPZX-00HKTT0 1TB - 93.7%
    RAM: Kingston HyperX DDR4 2666 C15 2x16GB - 76.8%
    MBD: Acer Predator G3-572

    I'm not an Acer employee. (just here to help in the best way i can)
    If my answer fixed you issue please accept it for any other users who search for it would find it quickly thanks :)
    If you want to learn more about undervolting/optimizing windows join the Predator fb group and youtube channel:

    Owner/Admin (HOTEL HERO/Red-Sand/Opoka Opoka)
    https://www.facebook.com/groups/PredatorHelios300
    https://www.youtube.com/channel/UCNJwGUHxSJ8FKqAhnOqQuAw
    Acer support:
    https://www.acer.com/ac/en/US/content/service-contact
    http://www.acer.com/worldwide/support/