No Video Output from New TC-885

h4xintl
h4xintl Member Posts: 8

Tinkerer
edited March 1 in 2019 Archives
I am trying to set up a new TC-885. The VGA output from the D17E5,Aspire TC-885 is connected to the DVI-D input on an EIZO monitor. The monitor does not sense any input from the Aspire, which does not have a dedicated GPU. I also tried the Aspire's HDMI port to the Eizo's DVI-D input with the same result.

Best Answer

  • h4xintl
    h4xintl Member Posts: 8

    Tinkerer
    Answer ✓
    I found an old KDS monitor with a VGA input and it seems to be working.  The Eizo may be toast, but I'll check it out later.

    Thank you, billsey, for forcing me to reconsider the monitor!

Answers

  • TECH_MAN
    TECH_MAN Ally Posts: 453
    Hi h4xintl

    Check the video card settings, if there is any option to leave the hdmi input as the default device!
    Does your motherboard have the nvidia video card or only the intel video card?
    Hit 'Like' if you find the answer helpful!
    Click on 'Yes' if the comment answers your question!
  • h4xintl
    h4xintl Member Posts: 8

    Tinkerer
    edited September 2019
    Thanks for your comment. Unfortunately, since I have no video, I have not been able to see or change anything. It is a new machine that has never been set up. No separate video card.

    I am sure the monitor is working. Is there a different way that I can confirm whether or not the Aspire has video output?
  • billsey
    billsey ACE Posts: 34,246 Trailblazer
    It easily could be the cable. Do you have access to a different monitor or different cable? Does the monitor support inputs other than DVI-D?
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • h4xintl
    h4xintl Member Posts: 8

    Tinkerer
    Thanks for your comment. I tried 2 different cables, VGA to DVI-D and HDMI to DVI-D. Those are the only two outputs on the Aspire and both cables are new. The only other input on the monitor is a D-Sub Mini. I'm really sure the monitor is working well, but I will verify that as soon as I can using my laptop as input.
  • h4xintl
    h4xintl Member Posts: 8

    Tinkerer
    Answer ✓
    I found an old KDS monitor with a VGA input and it seems to be working.  The Eizo may be toast, but I'll check it out later.

    Thank you, billsey, for forcing me to reconsider the monitor!
  • billsey
    billsey ACE Posts: 34,246 Trailblazer
    It's within the realm of possibility that the VGA to DVI-D and HDMI to DVI-D cables are actually DVI-D to VGA and DVI-D to HDMI. Sometimes the cables aren't symmetrical, especially when converting an analog signal to to digital.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.

Categories