GX-281 motherboard pins

SGforce
SGforce Member Posts: 1 New User
edited March 1 in 2019 Archives
HI all.  I'm taking all the insides of my Aspire out and putting them into a new case but I can't figure out how to properly plug the power switch and LED pins.  There is no motherboard documentation as far as I've found.

Answers

  • billsey
    billsey ACE Posts: 34,682 Trailblazer
    You should be able to puzzle them out by tracing from that 14 pin connector to the function they perform in the front of the original case. I also haven't seen a pinout diagram but the main things in that header you need to pull out for the new motherboard is the power switch and LEDs.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Rasecmeister
    Rasecmeister Member Posts: 1 New User
    i can send you the diagram if you want
  • Alr
    Alr Member Posts: 1 New User
    Hi!
    Can you send the diagram to me?

  • billsey
    billsey ACE Posts: 34,682 Trailblazer
    I think each time someone figures it out they just do theirs and don't come back here with the pin-out for us.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.