My letters turing into 7

Jeon
Jeon Member Posts: 6 New User
edited September 2023 in 2019 Archives
My uiopjklm,. keeps changing to 7?

Why is this happening?

Answers

  • JackE
    JackE ACE Posts: 45,098 Trailblazer
    Open Device Manager. Click keyboard folder. Uninstall the keyboard driver. Exit Device Manager. Reboot computer. Jack E/NJ

    Jack E/NJ

  • Jeon
    Jeon Member Posts: 6 New User
    edited May 2019
    JackE said:
    Open Device Manager. Click keyboard folder. Uninstall the keyboard driver. Exit Device Manager. Reboot computer. Jack E/NJ

    It didn't work.

  • JackE
    JackE ACE Posts: 45,098 Trailblazer
    What email or text program are you using to type? Do all the characters that you type turn to 7? Jack E/NJ

    Jack E/NJ

  • Jeon
    Jeon Member Posts: 6 New User
    JackE said:
    What email or text program are you using to type? Do all the characters that you type turn to 7? Jack E/NJ
    I am using a Laptop and not all the characters I type turn into 7 it's just "uiopjklm,." the characters turn into 7 until I repeatedly press the letter

    An example: 7777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777i7777777777777777

    I had to keep pressing my "i" until it came up.
  • JackE
    JackE ACE Posts: 45,098 Trailblazer
    Are you using the problem keyboard to post your last message? Jack E/NJ

    Jack E/NJ

  • Jeon
    Jeon Member Posts: 6 New User
    JackE said:
    Are you using the problem keyboard to post your last message? Jack E/NJ
    Yes, but it takes a while to type everything
  • JackE
    JackE ACE Posts: 45,098 Trailblazer
    edited May 2019
    Seems like the NumLock F11 key is being inadvertently activated. When this happens, try pressing the NumLock key or FN+NumLock keys. Also try this. Shut the machine completely off. Then turn it back on again and immediately start tapping the F2 key to enter the BIOS menu. Under the BIOS Main tab, look for an option to change function key behavior. Then press the F10 key to save your function key change and exit the BIOS. See if it helps. If you can't find this option, then let me know your full ACER model number. Jack E/NJ

    Jack E/NJ

  • Jeon
    Jeon Member Posts: 6 New User
    JackE said:
    Seems like the NumLock F11 key is being inadvertently activated. When this happens, try pressing the NumLock key or FN+NumLock keys. Also try this. Shut the machine completely off. Then turn it back on again and immediately start tapping the F2 key to enter the BIOS menu. Under the BIOS Main tab, look for an option to change function key behavior. Then press the F10 key to save your function key change and exit the BIOS. See if it helps. If you can't find this option, then let me know your full ACER model number. Jack E/NJ 
    I opened the BIOS menu, but it didn’t show a change function key behaviour, my acer model number is F5-573-725L
  • JackE
    JackE ACE Posts: 45,098 Trailblazer
    OK. Go back into the BIOS menu. Press F9 to load setup defaults. F10 to save settings and exit. If that doesn't work, then remove 3 screws from the HDD/RAM cover panel and try to re-seat the KB mainboard connector a few times to clean its contacts. If you can't get it completely off without removing the whole back cover, then just pull it part way off in a rocking motion, the push it back in again a few times. Jack E/NJ


    Jack E/NJ

  • Jeon
    Jeon Member Posts: 6 New User
    JackE said:
    OK. Go back into the BIOS menu. Press F9 to load setup defaults. F10 to save settings and exit. If that doesn't work, then remove 3 screws from the HDD/RAM cover panel and try to re-seat the KB mainboard connector a few times to clean its contacts. If you can't get it completely off without removing the whole back cover, then just pull it part way off in a rocking motion, the push it back in again a few times. Jack E/NJ


    I tried it and it worked, but after an hour it returned to the same thing my uiopjklm., turned back to 7.
  • JackE
    JackE ACE Posts: 45,098 Trailblazer
    You've got to re-seat it several more times. The contacts are obviously dirty/corroded inside. Re-seat it a dozen or more times. Won't hurt anything.  Jack E/NJ

    Jack E/NJ