acer aspire 5755G,batery works just 5min.

samdali · May 2019

hi,i have acer aspire 5755,i want to work pluged to electricity because my batery is damaged and works just 5min,bud laptop dont dont accept charging,only if laptop is stoped.charger work,because it charge batery since laptop is of
please if some one can help how to resolve this problem.

MaClane · May 2019

Good afternoon samdali !

What exact model of your laptop?
Example: Acer Aspire 5755G-2434G50Mics

Have you tried the battery reset?

samdali · May 2019

Hi,its Acer Aspire 5755G . i didnt tried reset batery

MaClane · May 2019

Perform the procedure of resetting and calibrating the battery and post the result.

Commodore_1995# · May 2019

How long have you had the notebook? It is possible that the battery needs to be replaced!

samdali · May 2019

for sure it needs to be replaced,but i use this notebook only home and want to have it under power freom electricity all the time but dont work,only under baterie

samdali · May 2019

hi Maclane can you tell me how,resetting and calibrating the battery .
many thanks

Commodore_1995# · May 2019

Do the following:

a) Disconnect the notebook from the electrical outlet and then disconnect the lithium battery.

b) press the power button for thirty seconds and test the notebook with the battery disconnected!

MaClane · May 2019

samdali disse:

hi Maclane can you tell me how,resetting and calibrating the battery .
many thanks

Process to reset the battery

    Disconnect the power adapter.
    Locate the hole to reset the battery in the bottom of the computer.
    He inserted a small clip into the hole. Hold the reset button for 05 seconds.
    Let the computer rest for 5 minutes without power.
    Plug in the power adapter and turn on the system.

External Battery Pack

If your notebook has an external battery, proceed as follows:
1- Unplug the appliance from the mains and then disconnect the battery.
2- Press the power button for thirty seconds, so that the static power is dissipated.
3 - Replace the battery and turn the unit on.

Process for calibrating the battery

For this, you must turn off the device and give a 100% charge.
Then unplug and use the battery until the battery runs out.
Reload it as before.
Repeat the process 3 times so that all cells are fully calibrated.