NITRO 5 AN515-52 (NH.Q3MEK.005)

CMOSSUK
CMOSSUK Member Posts: 27 Enthusiast WiFi Icon
edited November 2023 in 2019 Archives
Hello, 
Just purchased my Nitro 5 a couple of days ago so far so good. 

I wanted to know if my an515-52 can support SSD pcie (3.0x4) m2. nvme?

I'am thinking of installing a Toshiba 512gb Pcie 3.0x4 Nvme m2. type 2280.

My xpu and gpu specs are as follows

I7 8750h 8th gen
1050 Gtx 4GB


Best Answer

  • Jack22
    Jack22 ACE Posts: 4,167 Pathfinder
    Answer ✓
    @CMOSSUK
    Run on 2 lanes.

    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!

Answers

  • Jack22
    Jack22 ACE Posts: 4,167 Pathfinder
    @CMOSSUK
    YES, you can install



    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!
  • MaClane
    MaClane ACE Posts: 35,598 Trailblazer
    Good Morning CMOSSUK !

    What exact model of your laptop?
    Example:

    Acer Nitro 5 AN515-52-74DR


    Se minha resposta foi útil, deixe um Curtir, marque como Solucionado e clique em Promover!
    Caso contrario, fico a disposição para tentarmos sanar suas duvidas e resolver seus problemas!
    Atenciosamente:  J. MaClane™

    If my answer was helpful, leave a Like, flag as Fixed and click Promote!
    Otherwise, I am willing to try to heal your doubts and solve your problems!
    Sincerely, J. MaClane ™


    For users of the English, Spanish, French and German Community, I will be using Google Translate!
              
  • Jack22
    Jack22 ACE Posts: 4,167 Pathfinder
    @CMOSSUK
    You can also see the PCIe lane in the below picture


    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!
  • CMOSSUK
    CMOSSUK Member Posts: 27 Enthusiast WiFi Icon
    MaClane said:
    Good Morning CMOSSUK !

    What exact model of your laptop?
    Example:

    Acer Nitro 5 AN515-52-74DR


    Hi its an515-52-76SH
  • CMOSSUK
    CMOSSUK Member Posts: 27 Enthusiast WiFi Icon
    edited February 2019
    So is the above compatible with the AN515-52-76SH?
    And will this run on the 4 lanes or 2 lanes? 
  • Jack22
    Jack22 ACE Posts: 4,167 Pathfinder
    Answer ✓
    @CMOSSUK
    Run on 2 lanes.

    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!
  • CMOSSUK
    CMOSSUK Member Posts: 27 Enthusiast WiFi Icon
    Is it possible to enable x4 lanes? 
  • Jack22
    Jack22 ACE Posts: 4,167 Pathfinder
    @CMOSSUK
    Its not possible to enable x4 lanes.
    for more info you can check the below thread
    https://community.acer.com/en/discussion/549591/acer-nitro-5-an515-52-ssd-nvme-run-half-speed-help


    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!
  • CMOSSUK
    CMOSSUK Member Posts: 27 Enthusiast WiFi Icon
    Jack22 said:
    @CMOSSUK
    Its not possible to enable x4 lanes.
    for more info you can check the below thread
    https://community.acer.com/en/discussion/549591/acer-nitro-5-an515-52-ssd-nvme-run-half-speed-help


    Click on 'Yes' if the comment answers your question!

    Is their any truth behind this from this users post do you think?

    '' make sure you set AHCI and not RST + Optane. Do that and you will get full speed out of an NVME

    by default it is set to RST + Optane and optahe only utilises 2 lanes instead of 4 lanes 
    and some nitro 5 ships with optane and thats why it is slow , just change it to ACHI and it will be fixed 

    feel free to ask any questions''

    Its in the thread you posted the link too
  • Jack22
    Jack22 ACE Posts: 4,167 Pathfinder
    @CMOSSUK
    Not sure. Never tried it. 
    But i would suggest if know how to do it with the above step you can try, but am not sure whether that might mess your unit if something goes wrong.


    Click on 'Yes' if the comment answers your question!
  • CMOSSUK
    CMOSSUK Member Posts: 27 Enthusiast WiFi Icon
    I wanted to ask on this document it shows for my model and spec as the pcie 3.0 x4 lanes but when I checked using hwinfo it was just showing x1 lane, I'm a bit confused with this. 
  • Jack22
    Jack22 ACE Posts: 4,167 Pathfinder
    @CMOSSUK
    hwinfo  are third party application. Am not sue how true is the info provided by them
    But you can always go with Acer specs

     
    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!
  • CMOSSUK
    CMOSSUK Member Posts: 27 Enthusiast WiFi Icon
    Jack22 said:
    @CMOSSUK
    hwinfo  are third party application. Am not sue how true is the info provided by them
    But you can always go with Acer specs

     Click on 'Yes' if the comment answers your question!
    If I were to provide my laptops serial number  would you be able to find out the technical data? 
  • CMOSSUK
    CMOSSUK Member Posts: 27 Enthusiast WiFi Icon
    edited February 2019
    Serial number: **********************


    [Post edited to remove inappropriate or personal content -Acer-Harvey]
  • Jack22
    Jack22 ACE Posts: 4,167 Pathfinder
    edited February 2019
    @CMOSSUK
    I ll try to check with model number
    Click on 'Yes' if the comment answers your question!
  • CMOSSUK
    CMOSSUK Member Posts: 27 Enthusiast WiFi Icon
    Jack22 said:
    @CMOSSUK
    I ll try to check with model number
    Thank you for being patient with a noobie such as myself. 
  • CMOSSUK
    CMOSSUK Member Posts: 27 Enthusiast WiFi Icon
    This is a screen shot of my hardware, will it still run on x2 lanes still although it is showing 1x?