Is possible install a PCIe 3.0 x2 ssd in a PCIe 3.0 x4 slot -- Acer Predator Helios 300?

Sergiob_1983
Sergiob_1983 Member Posts: 10

Tinkerer
edited November 2023 in 2018 Archives
Hi everyone,

I want to install a ssd M2 PCIe 3.0 x 2 (240G) in my Predator Helios 300 (G3-572-75L9), however, in the specs of the laptop seems only accept ssd with interface: PCIe 3.0 x 4 (http://cdn.cnetcontent.com/b1/48/b1485267-4646-4966-9f7e-6926b2669206.pdf).

So, the ssd will work? Or it is mandatory use a ssd with PCIe 3.0 x 4 interface?

Thanks in advance.

Comments

  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    What is the SSD that you want to install(e.g brand, model)? I have never heard or read anywhere on the SSD's specification whether it supports x2 or x4 pcie lanes. All of them support 4 pcie lanes. If you install it on 2 lanes it will work at half the advertised speeds. In your case the M.2 SSD will work.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • Sergiob_1983
    Sergiob_1983 Member Posts: 10

    Tinkerer
    Hi ven98, thanks for the answer,

    The ssd is this model:
    model: Kingston SA1000M8 240G (2280)
    Interface: PCIe 3.0 x 2.

    (https://www.amazon.com/Kingston-SA1000M8-240G-Internal-Performance/dp/B07BMXS6SH/ref=sr_1_fkmr0_1?ie=UTF8&qid=1533129861&sr=8-1-fkmr0&keywords=ssd+kingston+A1000+m.2+PCIe+3.0+x+2).

    You think that it will work?

    Thanks again!
  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    It should work.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

Categories