Updated older aspire 4730Z from Bios v1.66 to v1.22

MIXXITDJ
MIXXITDJ Member Posts: 6 New User
edited August 2023 in 2018 Archives
Hello all, 

I was running bios 1.16, I installed windows 10 runs great.
I updated to bios 1.22 and I noticed that the CPU temps are not reading correctly now.
When I use REAL TEMP or Core Temp, the CPU temps just stay still. 
They do not fluctuate and every reboot it might be 32 C or 46 C or 50 C but they just stay steady, they dont move on any type of load.
I think the updated bios made the MOBO not read the CPU sensors correctly.
Anyone experience this?

From What I can tell, the laptop is not overheating, fan operated normally.

thanks in advanced

Answers

  • Sharanji
    Sharanji ACE Posts: 4,328 Pathfinder
    MIXXITDJ 

    Try a BIOS reset.
    Power on the system. As soon as the first logo screen appears, immediately press the F2 key, or the DEL key if you have a desktop, to enter the BIOS. Press the F9 key to automatically load the factory default settings. Confirm the changes by highlighting OK, then press Enter. To save the changes and exit the BIOS Setup utility, press the F10 key.

    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!
  • MIXXITDJ
    MIXXITDJ Member Posts: 6 New User
    Thanks
    I will try a reset and load BIOS defaults.
    I didnt think of that since the BIOS has limited settings to change.
     I Will try tonight and report back,
    Thanks Sharanji !!!!
  • MIXXITDJ
    MIXXITDJ Member Posts: 6 New User
    Also the Bios was V1.16 not V1.66, my mistake.
  • MIXXITDJ
    MIXXITDJ Member Posts: 6 New User
    Hello, 
    I reset to defaults, rebooted and tested temps. Same thing, they just stay fixed.  So I will just accept it, no biggie.
    The fan is working so i am ok with that.
    I even ran real temp sensor test and it stayed at 49C the whole time while prime 95 ran the test.
    I cannot find the 1.16 BIOS anymore so I cannot flash back to older.
    Thanks for trying.