Blue Screen of Death - ao756

Blueberry86
Blueberry86 Member Posts: 10

Tinkerer

edited March 18 in 2018 Archives
I am having a problem with blue screen and I don't know what to do. I just want to restart everything but keep the files but it won't allow me, it always gives me the "automatic repair" but when I repair it, it keeps giving me the same issue. How do I resolve this issue?!

Answers

  • Sharanji
    Sharanji ACE Posts: 4,328 Pathfinder
    edited February 2018
    @Blueberry86  

    A Blue Screen of Death is usually hardware or driver related. Most BSODs show a STOP code that can be used to help figure out the root cause of the Blue Screen of Death. 

    Did you just install a new program or a piece of hardware, update a driver, install a Windows update, etc.? If so, there's a very good chance that the change you made caused the BSOD. 

    You may remove the hard disk and backup any important data on to another device.

    Manually shutting down (forcibly) three times in a row will bring you to the recovery screen. Try to boot into safe mode or perform a system restore to previus restore point when the device was working fine. 

    Let us know the status of the issue. We will be glad to assist u further.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • Blueberry86
    Blueberry86 Member Posts: 10

    Tinkerer

    Hey @Sharanji

    It shows system thread exception not handled. Failed - ETD.sys

  • RanY2J
    RanY2J Member Posts: 599 Seasoned Specialist WiFi Icon
    Hey @Sharanji

    It shows system thread exception not handled. Failed - ETD.sys

    This problem is caused by touchpad driver. You need to disable the touchpad driver somehow. I assume that you're going through a blue screen of death loop.

    You can try accessing safe mode and see if you are able to log in to the computer. Once if you are able to log in, you need to disable the touchpad driver somehow.
    BElieve in YOUrself.
  • Blueberry86
    Blueberry86 Member Posts: 10

    Tinkerer

    edited February 2018
    I'm trying to do a automatic repair on my brother's laptop and it keeps giving me "Blue Screen Loop" every time I repair it. I have used command prompt to get this issue resolved but none of it works. I have also tried to do a recovery factory but it does not work either, once I press Alt and F12 it flex off.  
  • billsey
    billsey ACE Posts: 34,101 Trailblazer
    What model? Which OS version? Exact error?
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Blueberry86
    Blueberry86 Member Posts: 10

    Tinkerer

    @billsey

    Acer Aspire One  756-2418, Windows, C: Windows\System32\LogFiles\Srt.SrtTrail.txt and SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ETD.SYS) 
  • gr_reaper_20
    gr_reaper_20 Member Posts: 111 Skilled Fixer WiFi Icon
    Try booting in your system using safe mode.
    If that doesn't work and your data is already backed up, you can always do a clean installation.
    If there is no issue with the hardware it ll definitely solve your problem.

    Hope that helped you.
  • billsey
    billsey ACE Posts: 34,101 Trailblazer
    Let's see if we can get the thread moved to one of the Windows forums instead of Chromebooks. That'll be much better to find someone with a solution. ;)
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Blueberry86
    Blueberry86 Member Posts: 10

    Tinkerer

    @billsey @gr_reaper_20

    Unfortunately I cannot do a safe mode, it keeps leading back to automatic repair every time.
  • computergeek
    computergeek Member Posts: 4 New User
    Well. Did you tried manually formatting? Or reset?
  • gr_reaper_20
    gr_reaper_20 Member Posts: 111 Skilled Fixer WiFi Icon
    @Blueberry86
    DId you try doing what i suggested in pm?
    Hope that helped you.
  • Blueberry86
    Blueberry86 Member Posts: 10

    Tinkerer

    @gr_reaper_20

    Someone told me to a get E-Recovery thumb drive for it and it will solve my problem. When my brother got his computer it was a windows 8 now it's a windows 10. I guess when you upgrade to a different operating system some of the information that couldn't be restored or try to reset the pc and it could not.