How to enable Internal Graphics mode back to UMA?

keshavshiyal
keshavshiyal Member Posts: 2 New User
edited February 2024 in 2018 Archives
Recently I have accidentally make following settings with BIOS
Advance Choose Setup > Internal Graphics Mode > Disabled
Now I am unable to see Graphics on monitor How can I get back the Graphics to monitor. Computer start normally with all other basic peripheral (mouse and keyboard) 
Please help me as soon as possible.

Answers

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    you can try a blind BIOS load factory settings.
    press Del key at boot, wait 30 seconds, press F9 key, press Y key and then press enter key, press F10 key, press Y key and then press enter key.
    your system will reboot, if it's not working, power off your system, unplug the power cable, open your PC case and look for a silver round battery.
    take off the battery, press power button twice and wait 5 minutes, put back the battery, close your case and plug the power cable.

    try to boot.
    I'm not an Acer employee.
  • keshavshiyal
    keshavshiyal Member Posts: 2 New User
    IronFly said:
    you can try a blind BIOS load factory settings.
    press Del key at boot, wait 30 seconds, press F9 key, press Y key and then press enter key, press F10 key, press Y key and then press enter key.
    your system will reboot, if it's not working, power off your system, unplug the power cable, open your PC case and look for a silver round battery.
    take off the battery, press power button twice and wait 5 minutes, put back the battery, close your case and plug the power cable.

    try to boot.
    This is not working? 

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    if both doesn't work...i don't have other ideas.
    I'm not an Acer employee.