Acer One d255e ddr3 bios flash after 2 gb ram upgrade

ticotraveler
ticotraveler Member Posts: 3 New User
edited March 2023 in 2017 Archives

Oct. 11, 2017

So, I have installed a new 2 gb ram chip and got the black screen on start up.

All advice I seen is to reflash the bios.

I downloaded the bios files from Acer using the SNID number.

The files include:

DOS folder with: Flashit.exe, Flash.exe, PAV70D3.fd, PAV70D2.fd; Windows folder with: PAV70316.exe    

My question is which files should I include on my thumb drive to reflash the bios and do I really need to change the name of one of the files as some have suggested. (i.e. PAV70D3.fd rename to zg5ia32.fd)

Any other advice specific to my machine would be helpful.

Dave

Answers

  • JackE
    JackE ACE Posts: 44,898 Trailblazer

    Before you mess with BIOS firmware, does it boot up OK with the old memory module re-installed? Jack E/NJ

    Jack E/NJ

  • ticotraveler
    ticotraveler Member Posts: 3 New User
    I have not tried putting old ram back but it’s what I was going to do next. 
  • ticotraveler
    ticotraveler Member Posts: 3 New User
    Yes, I put the old ram back in and all seems to be working. Perhaps the new ram not compatible; try another vender? 
    Dave
  • JackE
    JackE ACE Posts: 44,898 Trailblazer
    Go to crucial dot com and see what compatible DDR upgrades are recommended for your particular machine. It also could simply be a bad module. Jack E/NJ 

    Jack E/NJ