Display not working

DarkoxD
DarkoxD Member Posts: 2 New User
edited March 2023 in 2017 Archives

Model of my notebook is Aspire E 15 573G 313Y.
Last day i was in my room (not on the laptop even thought he was working) and the display just went dark. The only thing that was open was a pictures app. At first i thought it went sleep mode automaticly but when i moved  a mouse and pressed spacebar a couple of times it did not start working.

It is not working yet. Tried to fully charge him, not working, now i am going to let the battery die off and then turn it on to see if something will change because removing the battery from laptop is really hard to remove (there is no button to press so it just comes out) and i could not remove the case.

Any help :/ ?

Thanks in advance.

Answers

  • Trukntigger
    Trukntigger Member Posts: 256 Mr. Fixit WiFi Icon

    Battery reset is normally a pin hole on bottom for a paper clip to press. Did you try an external display? Description sounds like no power up? Not display? 

  • DarkoxD
    DarkoxD Member Posts: 2 New User

    External display works fine, i pinned that hole and still everything is the same.

  • Trukntigger
    Trukntigger Member Posts: 256 Mr. Fixit WiFi Icon

    If in warranty I would send in for repair. If not LCD may have failed. Can check if the 30 pin connector is loose on LCD. Pop trim ring off by starting top center area and work toward sides then down and remove.  4 screws hold it on to back plastic. Remove. Lean top edge toward yourself, on bottom right should see 30pin edp connector with some tape, check its fully pressed on tight. Add few screws and power up test. If fail, yea, display failure most likely, avg replace cost 45-80$ usd if you do yourself which is easy.

  • kenz101
    kenz101 Member Posts: 42 Devotee WiFi Icon

    Try turning the machine off completley and remove battery. press and hold power button on machine for 30 secs then plug the AC in and power on the machine to see if that helps. If no good and i can see that u have tested to see if an external screen works then the lcd has failed.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.      :)