Loss of CD/DVD Driver on Upgrading to Windows 10

TomS1
TomS1 Member Posts: 4 New User

I have a Gateway All-in-One Model ZX4270 which I have upgraded from Windows 8.1 to 10.  All is OK except that I apparently lost my CD/DVD drive in the process.  It is still physically there, and it spins a disk when one is inserted, but the computer doesn't recognize the drive.  It isn't shown on File Explorer.   Based on advice from the Microsoft forum, I first ran the Troubleshooter (no effect) and then uninstalled the driver from the Device Manager and rebooted, but no new driver was installed.  I've looked on the Acer web site for a new driver to download, but none seems to be listed.  Any help or ideas would be appreciated.

Best Answer

Answers

  • JordanB
    JordanB ACE Posts: 3,729 Pathfinder

    Most of the forum members with AMD based computers that have a missing DVD/CD go to the AMD support website and download the drivers.

     

    Look for AMD Chipset, AHCI, USB 3.0 and RAID Drivers

     

     

    amddrv.PNG

     

    http://support.amd.com/en-us/download

     

    Download the appropriate driver 32 bit or 64 bit.  I'm not sure if you have 32 bit or 64 bit.  And I'm not sure my suggestion will work for you.  Good luck.

     

    http://community.acer.com/t5/Legacy-Laptops-and-Netbooks/DVD-drive-is-not-working-with-Windows-10-on-Acer-Aspire-5553G/m-p/441292#M69518

     

    http://community.acer.com/t5/Windows-10/5553g-windows-10/td-p/375386/page/3

     

     

    I'm not an Acer employee.
  • TomS1
    TomS1 Member Posts: 4 New User

    Thanks for the quick response.  I downloaded the suggested driver from AMD to my Download Folder and then re-booted the computer, but the driver did not install, and the Device Manager still shows no CD/DVD device (since I uninstalled the original one in an earlier attempt to fix the problem).  Is there something more that needs to be done to enable the downloaded driver to be installed?  I didn't quite understand the advice in the earlier posting that you linked to, that, "After installing AMD Chipset Drivers and system reboot update drivers for Standard ATA controller - replace it with driver from AMD."  Can you explain this, please?

     

    Thanks

  • JordanB
    JordanB ACE Posts: 3,729 Pathfinder

    What did you download?  Crimson chipset driver package? 32 bit? 64 bit?

    Was it an application?

    Did you double click it?

     

     

    If you have a friend that is a little more computer savvy....maybe they can help you install the crimson driver package.

     

    Good luck.

     

     

    I'm not an Acer employee.
  • TomS1
    TomS1 Member Posts: 4 New User

    OK, until seeing your question above, I had assumed that the downloaded driver should install automatically upon rebooting.  In answer to your question, what I downloaded was the AMD Chipset Drivers Package for Windows 10/8.1/7 (64 bit), Crimson Edition 16.9.2.  I have now run the installer by double-clicking on it in my Download folder, and I’ve rebooted the machine.  The Device Manager now shows “AMD SATA Controller” under “IDE ATA/ATAPI controllers”, lines that were not there before, but still no CD/DVD drive is shown in File Explorer, and the computer still does not respond when disks are inserted.

    I have found on another forum, http://www.tenforums.com/drivers-hardware/16301-windows-10-my-dvd-cd-drive-not-recognised-all.html, a recommended patch to address this problem, but I am a bit reluctant to tamper with my Registry unless it is the only option.  

  • JordanB
    JordanB ACE Posts: 3,729 Pathfinder
    Answer ✓

    I'm sorry but I'm out of ideas.  I'm not sure if altering the registry will help or cause problems.

     

    I might even consider purchasing an external DVD and then connect it to a USB port.

     

    https://www.amazon.com/Best-Sellers-Computers-Accessories-External-DVD-Drives/zgbs/pc/1292113011

     

    http://www.newegg.com/External-CD-DVD-Blu-Ray-Drives/SubCategory/ID-420

     

    Maybe someone else can help.

    I'm not an Acer employee.
  • TomS1
    TomS1 Member Posts: 4 New User

    I think you're right about the external drive.  I hadn't realized they were so inexpensive, considering how much time might be required and how much hassle might result from continuing trying to revive the existing drive.

     

    Thanks very much for your help.