Signal Processing on left Projector

TheNephilim
TheNephilim Member Posts: 14

Tinkerer
in 2015 Archives

Hi All,

 

I have a 3 Projector setup for my Gaming rig and use nThusim warping software as it is a curved screen. The Projectors I use are 3 - Acer X1261P DLP Projectors..

 

Now the issue I am having  is when I run Elite Dangerous and after the game starts my Left Projector goes into this mode "Signal Processing Please Wait". now when I get back in game my edge blend is bent or misaligned..

 

Now I am wondering how can I stop the left Projector from doing the signal processing as the other 2 do not go into that mode when the game starts.. I was wondering if there was a setting in the projector I could turn off to make it not go into Signal Processing mode..

 

As I stated it Only Happens on the left Projector.. so there has too be a way to stop it from happening..

 

I have the 3 Projectors hooked to my PC which has a 980GTX and I use the VGA Connectors on the Projector with 2 Display Port to VGA Adpaters with 1 DVI to VGA Adapter they are all active adpaters..

 

I would appreciate some help there has to be a solution to this as it is very annoying for only the 1 projector to do this and misalign my Projected image..

Answers

  • TheNephilim
    TheNephilim Member Posts: 14

    Tinkerer

    Well after all this time I figured out what was going on. it was not the Projectos fault but the wat nThusim handles the warping plus the way Elite Dangerous did not set a triplescreen mode when launched..

     

    I found a workaround and the guys at nThsuim said they are going to add a feature where nThusim handles the changing resoltions more gracefully whew after all that I find my problem so for future reference as it seems most of my searches bring me back to old posts I had made previously, talk about niche..

Categories