Help, my Acer aspire one D270 is not booting
Best Answer
-
Rajnish9386,
Try this, just to see if it works. When you power it on tap the F8 key and see if you can get to the advanced options screen and attempt a startup repair.
0
Answers
-
Rajnish9386,
What was happening with the unit that called for the need to run the recovery process? It could be that the hard drive may be defective.
0 -
Everything got messed up, so I thought to get back to original settings0
-
Rajnish9386,
Could you please be a little more specific when you say everything got messed up? There are only a couple reasons why the recovery would not work; a bad piece of hardware is one, another would be the recovery partition itself.
0 -
The system was hanging nd was working too slowly. My touch pad scroller was uninstalled by mistake, I was not able to reinstall it. My wi-fi was not working. Every time when the system boots error was appearing on the screen, I dont exactally remember bt it was iritating nd I thought may b I will get an opertunity to create additional drive on the system as it was having only one, I.e. C drive right from beginning.0
-
Rajnish9386,
Thanks for the clarificiation, it sounds like the hard drive might be defective honestly. If you can run a disc check or starup repair at all, try that to see if there are some bad sectors that can be fixed. If not, replace the hard drive and use the recovery media you created for your unit and see if it loads fine.
0 -
Oooops! No recovery media available. Any thing else, I can do.0
-
Rajnish9386,
Try this, just to see if it works. When you power it on tap the F8 key and see if you can get to the advanced options screen and attempt a startup repair.
0 -
Thanks a lot. It worked nd I got my system back to factory settings. Thank u0
