Acer E5-571G touchpad not install in windows 7

machociprian
machociprian Member Posts: 30 New User
edited March 2023 in 2014 Archives

I have the same problem:

I recently purchased an Acer E5-571G and see that is not running function scroll.I installed all the drivers for touchpad possible, but  in Device Manager appear: PS / 2 Compatible Mouse- Microsoft Manufactured instead of Elantech or Synaptics.Any idea what to do? I mention that notebook runs Windows 7 64 bit.Thanks!

«1

Answers

  • JackE
    JackE ACE Posts: 44,895 Trailblazer

    Is it factory-installed Win7?

     

    Jack E/NJ

    Jack E/NJ

  • machociprian
    machociprian Member Posts: 30 New User

    No,it had just boot linpus......

  • JackE
    JackE ACE Posts: 44,895 Trailblazer

    >>>I installed all the drivers for touchpad possible,>>>

     

    Which driver version numbers did you try to install? Thanks.

     

    Jack E/NJ 

    Jack E/NJ

  • machociprian
    machociprian Member Posts: 30 New User

    TouchPad_Synaptics_17.0.6.21_W7x64_A

    TouchPad_ELANTECH_11.6.24.209_W7x64_A

    ...and another dozens....

  • machociprian
    machociprian Member Posts: 30 New User

    all appear to have been installed, but in device manager still has PS / 2 Compatible Mouse with minimum basic settings

  • JackE
    JackE ACE Posts: 44,895 Trailblazer

    Go to Control Panel's uninstall program function. Delete all Elan or Synaptics touchpad drivers that you find. Then try re-installing only one. Check Device Mgr. If still not included or error message, uninstall that driver from Control Panel and try re-installing the other.

     

    Jack E/NJ 

    Jack E/NJ

  • machociprian
    machociprian Member Posts: 30 New User

    in control panel(programs and features) there is no elan or synaptics driver anywere

    if i uninstall ps/2 mouse driver from device manager,says reboot the computer and when windows start ,it instals de driver(generical) automaticaly.......

  • machociprian
    machociprian Member Posts: 30 New User
  • machociprian
    machociprian Member Posts: 30 New User
  • machociprian
    machociprian Member Posts: 30 New User
  • JackE
    JackE ACE Posts: 44,895 Trailblazer

    >>>I installed all the drivers for touchpad possible, but  in Device Manager appear: PS / 2 Compatible Mouse- Microsoft Manufactured instead of Elantech or Synaptics.>>>>>>in control panel(programs and features) there is no elan or synaptics driver anywere>>>

     

    Then neither the Elan nor Synaptics drivers were in fact installed. I suggest you try to re-install the Synaptics driver first. Then check Control Panel uninstall function and Device Mg to see if it appears on the lists. If not, then try re-installing the Elan driver. Report back with results. Thanks

     

    Jack E/NJ 

    Jack E/NJ

  • machociprian
    machociprian Member Posts: 30 New User

    No.....does not appear Elan or Synaptics nowhere......

    can be something related to UEFI or LEGACY mode in boot???

    uffffff !!!Man Embarassed

  • JackE
    JackE ACE Posts: 44,895 Trailblazer

    That was quick!!! Did you actually try to reinstall the Synaptics driver just now? Did you get any error message that the installation did not complete?!!

     

    Jack E/NJ

    Jack E/NJ

  • machociprian
    machociprian Member Posts: 30 New User

    synaptics driver has 200 mb and it  is installed in a few seconds....something is wrong......

  • JackE
    JackE ACE Posts: 44,895 Trailblazer

    Yes, it seems so. Did you actually unzip the original compressed files? Double click on the compressed files to see if they'll properly unzip to the executables and readme files.

     

    Jack E/NJ

    Jack E/NJ

  • machociprian
    machociprian Member Posts: 30 New User

    no,said no need update and its ready to use...........and this is what i have......no scroll,no advanced features....

    3.png

  • machociprian
    machociprian Member Posts: 30 New User

    4.png

  • JackE
    JackE ACE Posts: 44,895 Trailblazer

    OK. Please run the file "main.cpl" without the quotes. Then click the device settings tab. The synaptics device should be shown and whether or not it is enabled. Click enable. Report back with results.

     

    Jack E/NJ

    Jack E/NJ

  • JackE
    JackE ACE Posts: 44,895 Trailblazer

    And if you still don't see the synaptics device in device settings, try pressing the Fn+F7 touchpad toggle key combination.

     

    Jack E/NJ

    Jack E/NJ

  • machociprian
    machociprian Member Posts: 30 New User

    THERE IS NO DEVICE SETINGS !!!!!!!

     

    5.png