acer 4752g stuck on acer logo

miccaspe
miccaspe Member Posts: 5 New User

before my 4752g is working fine when suddenly i want to upgrade the hdd from 500GB to 750GB i removed the 500gb and replace by 750gb and i press many times the f2 key to boot from bios to check the 750gb and turn off when i turn it on it stuck with acer logo so i wait and wait till 3 hour but nothing hapen it still on acer logo, when i press f2 in the left side say "Please Wait...... and stuck hope give me tips how to fix my laptop. . even i put back the 500gb orig hdd it stil on logo. I see a color blue loading bar progress stop 75% in the right corner.DSC00024.JPG

Answers

  • silizium
    silizium Member Posts: 239 Enthusiast WiFi Icon

    If you replace you harddisk with another one, you are of course not able to boot from the new disk. There is no operating system on it. You will have to install an operating system on your new harddisk.

  • brummyfan2
    brummyfan2 ACE Posts: 28,688 Trailblazer

    Remove the hard drive, remove the battery, disconnect the mains (AC adapter), press power button for 20-30 secs.

    Then insert your original 500GB hard drive, insert the battery, connect the mains and switch on.

    When you start normally, use a third party software like macrium reflect to clone your disk to 750GB and replace the original disk with this 750GB drive.

  • miccaspe
    miccaspe Member Posts: 5 New User

    thank you guys for the reply, sir brummy i try your advice but it wont change still on acer logo. here is the history last night i buy secondhand hdd 750gb from damage laptop and so the hdd also must be damage and my mistake is i install the damaged hdd to my acer laptop afteri install the damaged 750gb i hear a sound keeps beep beep beep in my laptop so i turn it off then switch on there it stuck. .

     

    i dont want any 750gb . . . . please help me guys thanks in advance

  • miccaspe
    miccaspe Member Posts: 5 New User

    i dont want to replace my 500gb, all i want is to back to normal my laptop. i done install os before but this one i cannot enter bios (press f2 to enter bios) wwhen i press f2 in the left buttom corner it says "Please Wait...." almaost 1 hour nothings happen, crl+alt+del not functioning.

  • silizium
    silizium Member Posts: 239 Enthusiast WiFi Icon

    Insert your 500 GB harddisk, turn it on and press frequently F2. Sometimes you must turn it off on on twice, so the BIOS is able to recognize the new inserted disk. If this is not working, repeat the steps brummyfan2 had written. Do not change all the time between the harddisks.

  • miccaspe
    miccaspe Member Posts: 5 New User

    i do it all day but still on acer screen, when i press f2 it beep once then say Please Wait . . . after 3hours waiting still stuck on "Please wait. . ." i see a blue loading bar in the right side but stuck on almost 75% laoding

  • silizium
    silizium Member Posts: 239 Enthusiast WiFi Icon

    Maybe you must do a repair install. Insert your recovery media and start the Windows installtion. It's seems you have something borked.

  • miccaspe
    miccaspe Member Posts: 5 New User

    i try recover media but not go to any boot priority what is the possibl problem

     

  • KiranKumar
    KiranKumar Member Posts: 1 New User
    Hi this is kiran
    Iam also facing same problem please help me please
This discussion has been closed.