how do I add ram to d270 acer aspire

saddlescombeway
saddlescombeway Member Posts: 1 New User

the advice on the official faq says ram cannot be added to the d260 but I have a d270. how do you replace the 1gb with a 2 gb memory

Answers

  • Travis-Acer
    Travis-Acer Acer Crew Posts: 681 Acer Crew

    The AOD270's RAM is not considered user accessible.  It is recommended that someone familiar with the proceedure perform it.

     

    To replace the current stick with a 2GB stick, please follow these directions:

     

    1. Remove the battery pack.

    2. Remove any dummy cards.

    3. Remove the keyboard utilizing the four tabs at the top of the keyboard and by disconnecting the ribbon cable.

    4. Remove the 14 screws securing the base cover. These are located underneath where the keyboard was.

    5. Press the base cover release tab located near the bottom right of the hard disk drive.

    6. Once the base cover is removed the RAM will be visible and accessible. Push the DIMM clips on each side of the chip outwards to remove.

    7. Reverse steps to reassemble unit.

  • jgary
    jgary Member Posts: 2 New User

    thanks for the information as my wife figures she needs more ram for speed. Bought the 2gb chip from Amzon. Can not

    believe they have everything.  James Hall

  • alasdair555
    alasdair555 Member Posts: 41 New User
    Upgrading beyond 2GB is also possible, with some modifications to Windows 7 Starter.
This discussion has been closed.