Drivers for Acer Aspire One KAV60
saaiq
Member Posts: 9 New User
Hello to every one! m new to this forum kindly help me anyone
i have Acer aspire notebook Model no KAV60 but on acer website i cannot find this model number
as i want fresh drivers for this model
can any one tell the solution
?
Regards....
0
Best Answer
-
Hello saaiq,
Drivers of the Acer Aspire One KAV60 (AOD250):
Acer Worldwide - Choice your country - Support --> Search by product --> Group Netbook, Chromebook --> Series Aspire One --> Products AOD250 --> Operating System --> Driver and you can select Latest or All.
0
Answers
-
Hello saaiq,
Drivers of the Acer Aspire One KAV60 (AOD250):
Acer Worldwide - Choice your country - Support --> Search by product --> Group Netbook, Chromebook --> Series Aspire One --> Products AOD250 --> Operating System --> Driver and you can select Latest or All.
0 -
hello m very thankful for your reply
now one of the most critical problem occurs my laptop which is KAV60 of acer aspire goes hanged during work and screen turns sometimes blue and sometimes white since from a month and i have to powered off the system because shutdown options and window enviornment totally untouched when coloured screen comes
i tried different solutions i scan the system from viruses i tried microsoft security essentials and others secrutiy programs and also i changed the LCD VGA cable but still problem is there
kindly kindly kindly help if you understand
is it internal hardware problem any software problem or hard disk is going to crash?
i hope you reply
regards...
0 -
Hello,
What's your windows version?
Have you tried to recover your system?
0 -
hello! i install fresh window so many times but still problem is there.the system boot too late and slow.sometimes recovery fails... there is windows7 hoem premium version in this laptop ... kindly help i could not trace the problem whether it is hardware or software?0
-
Hello,
To enter in Bios Setup Utility:
When you see the Acer screen, press F2.
1- Note the HDD model name (information tab)
2- Press F9 to load default settings
3- Press F10 to save and exit the bios setupt utility
Your laptop will restart automatically. Normally, you'll hear only one bip.
If the result is same, send me the HDD model to give you a diagnostic tool.
0 -
ok i try
0 -
Hello! thanx for your suggestions i tried your given suggestions but problem is still there system goes hanged and also blaked screen issue remain same
my system's HDD model no is TOSHIBA MK2555GSX ATA DEVICE
kindly if any diagnostic tool available help me......
Regards,
0 -
Hello,
I don't know if you have access to the boot menu (F12).
If you have access, you can try to test your HDD with Seatools for DOS.
Link software: SeaTools
Link guide: SeaTools for DOS Guide
"SeaTools for DOS is a comprehensive, easy-to-use diagnostic tool that
helps you quickly determine what is preventing you from accessing data
on your desktop or notebook computer. It includes several tests that
will examine the physical media on your Seagate or Maxtor disc drive
and any non-Seagate disc drive."
0 -
Hello! i downloaded the seatool for DOS but it is disc image how i burn it?
as there is no cd room with this KAV60 laptop .and how i use this tool either at the time of boot?
Regards..
0 -
Hello,
1- Download, install and use FlashBoot (Demo) (easy to use) to convert the image file to bootable USB.
2- Boot on USB key (When you see Acer screen, press F12 - Boot Menu --> Choice USBHDD).
3- Run the basic tests.
An other way, How To Create Bootable USB Disk For Seagate SeaTools For DOS
0 -
hello! thanx for helping me kindly tell what size of usb should be either 2 GB or 4GB?
Regards
0 -
Hello,
An usb key of 2 GB is more than enough. Personaly, I work with an old usb key of 128 MB (only for DOS)!
Use Flashboot because you'll need it to prepare the test of memory (may be).
Otherwise, have you the possibility to connect a monitor on the netbook. In this case, you'll be able to know if it's a default of internal display (netbook).
Note: <Fn> + <F5> - Display toggle - Switches display output between the display screen, external monitor (if connected) and both.
0 -
hello! i make usb of 2 GB bootable using seaget bootable usb toolkit and as this laptop doesnot support to boot from usb so i tried the p lop bootmanager and now when i boot from usb using plop boot manager there is blank screen comes with text "Free DOS" and nothing progress further i dont know why?
then i download software to burn disc image to usb and using it i installed seaget iso to usb but when i booted from this plop not recognized it it display error no device detected
and when i tried falshboot and make usb bootable using flash boot and then boot from usb using p lop it aslo show blank balck screen with text starting cmain and nothing progress further
i think i could not found how to use this appropriatedly
kindly help me
regards...
0 -
Hello,
I tested this solution an it works perfectly! Same quality of test. No mouse pointer.
Tools and file:
1- Download the file Seatools for dos version V1.12 (Text) - ISO CD-ROM IMAGE: SeaToolsDOS112.ISO
2- Download ISO Toolkit (portable version - no install): ISOToolkit.zip
3- You need Win32 Disk Imager (portable version - no install). You have it.
Procedure:
1- Format your USB key with the Windows Disk Manager in FAT32.
2- Execute ISO Toolkit --> Extract image tab, you extract SeaToolsDOS112.ISO in a folder.
3- In this folder, rename SeaTools.ima --> SeaTools.img
4- Execute Win32 Disk Imager, write Image File: SeaTools.img (new one) on your usb key.
Normally, you'll find these files and folder on your USB key:
5- Boot on your USB key (personally, I see it like a removable device - FDD)
6- Make Short (touch S) and Long (touche L) test only.
7- To quit the program CTRL+ALT+DEL to reboot.
0 -
Hello,
In your bios setup utility, F12 boot menu is disabled by default.
So you can change the value in enabled to access the differents devices.
It wasn't necessary to install Plop boot manager.
0
This discussion has been closed.
