Nitro5-SSD not recognized.

Guardian967
Guardian967 Member Posts: 1 Newbie
edited June 7 in Nitro Gaming

ORIGINAL:

Salve ho installato un secondo hard disk SSD sul mio Nitro 5 ma non viene riconosciuto ne dal bios

e ovviamente nemmeno da widows,qualcuno ha avuto lo stesso problema?

TRANSLATE:

Hi, I installed a second SSD hard disk on my Nitro 5 but it is not recognized by the biosand obviously not even by widows, has anyone had the same problem?

[The message was translated using Google translation.]

[Edited the topic title to include model number]

Answers

  • Puraw
    Puraw ACE, Member Posts: 17,110 Trailblazer
    https://community.acer.com/en/discussion/725576/nitro5-ssd-not-recognized

    Hi, wrong Format – If the SSD isn't initialized or formatted correctly, Windows won't recognize it. You can check this in Disk Management and format it as NTFS or exFAT.
    Loose Connection – If the SSD isn't properly seated in the slot, it may not be recognized.
    Driver Issues – Missing or outdated NVMe/SATA drivers can prevent detection. Updating drivers in Device Manager might help.
    Faulty SSD or Slot – If none of the above work, testing the SSD in another device or checking the slot for damage could be necessary.

    If you are using a M.2 Sata SSD make sure that slot2 supports NVMe and M.2 Sata SSDs.

  • StevenGen
    StevenGen ACE Posts: 14,401 Trailblazer
    edited 12:10AM
    https://community.acer.com/en/discussion/725576/nitro5-ssd-not-recognized

    Fai questo dopo aver installato il nuovo disco SSD M.2, poiché devi eseguire un'inizializzazione della gestione disco, quindi fai clic destro sul nuovo disco e poi inizializza e assegna al nuovo disco SSD M.2 una lettera di unità come 'D', poiché è quello che non hai fatto, poiché NESSUN nuovo SSD M.2 sarà riconosciuto all'interno di Windows senza inizializzare il disco tramite la gestione disco. Buona fortuna e spero che questo ti sia utile.

    image.png

    Do this after you have installed the new M.2 SSD drive, as you need to do a Disk Management Initialization then right click the new drive and then initialize and give the new M.2 SSD drive a drive letter like “D” as that is what you didn’t do, as NO new M.2 SSD will be recognized within windows without initializing the drive through Disk Management. Good luck and hope this helps you out further.

    Se questa risposta soddisfa la tua domanda e risolve il tuo quesito, ti prego di "Cliccare su Sì" o "Cliccare su Mi piace" se trovi utile la mia risposta👍

Categories