Predator Orion 3000-Played cod for few hours, reset the PC for windows updates, system froze on boot

Grotzilla
Grotzilla Member Posts: 2 New User
edited December 22 in Predator Desktops

OK got the pc yesterday brand new. Played cod for a couple of hours then reset the pc to complete some windows updates, the pc froze on boot up and I turned it off now the pc will not boot up, the monitor is blank, and it shuts down after around 10 seconds.

https://www.reddit.com/r/pcmasterrace/s/rqIrSPwpEA

Above link is to a video of the pc turning on

I've removed CMOS battery, but it still won't boot.

[Edited the topic title to include the topic issue.]

Answers

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,439 Pathfinder

    @Grotzilla

    Try to clear the CMOS using jumper.

    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • StevenGen
    StevenGen ACE Posts: 12,487 Trailblazer

    If your desktop is the PO3-655 or similar, first do a Startup Repair and boot into the Win-11 Advance options see this guide here of how to do that, and once you are in the window "Advanced options" do a "Startup Repair" as this should fix the boot problem of your desktop and allow it to boot.

    If the above doesn't work then you can do a "Hard Reset" if you want and are willing to take this brand new desktop apart? As in my opinion, you should send this new desktop to Acer Tech Support in your country and don't touch and/or open this new product and let the Acer technicians fix this issue for you.

    For your information, this is the PO3-655 (the PO3-650 is the same) mainboard layout for your information

    Otherwise and if you want to do a Hard Reset then do this:

    Disconnect the desktop from the mains power point, disconnect the mainboard from the PSU, removing the bios battery after and then short its +&- plug pins with a metal screwdriver/tweezers, take the M.2 SSD out and all the ram out and leave the desktop bare like that for 15min to let the mainboard EC and Chipset chips reset completely. Reconnect everything as the desktop should reboot.

    If all the above doesn't work, then try and do a Win-11 24H2 version new clean install by doing this:

    Construct a new bootable Win-11 24H2 version installation disk with Rufus 4.5 and put the IRST Intel driver for your PO3-6xx model desktop, so that the installation recognizes the M.2 SSD drive at the installation of Win-11 drive selection section, then do and finish the clean install of Win-11, and see if that is the problem of your new desktop. These are all the options that you so do that in the order I've described for you. Good luck and hope this helps you out to solve your problem, as it should not be happening and I know that its annoying,

    If this answers your question and solved your query please "Click on Yes" or "Click on Like" if you find my answer useful👍