Aspire xc-885 SSD upgrade. Can I plug in a 250GB SSD just for Windows and use my "classic" HDD

13»

Answers

  • Larryodie
    Larryodie Member Posts: 1,743 Community Aficionado WiFi Icon

    I'll have to study BUT the bottom line is that the USB install should take care of all the drivers as you can install it with a formatted blank Hard Drive.

    Maybe reset the BIOS, with the reset button or pull the battery, unplug and let sit overnight.

    You can do a F9 in bios then a F10 in bios to reload your default bios , too.

  • Stef27
    Stef27 Member Posts: 23 New User

    Yesterday

    I did a reset in bios because i touched a lot of things and after i were lost.

    When i restarted from the original setup bios ,i've changed 2 or 3 things to boot on USB

    Don't worry,the pc will go with spécialiste in few days.

  • billsey
    billsey ACE Posts: 34,601 Trailblazer

    It sounds like the disk clone wasn't done correctly, so the EFI partition is either not there or corrupted. Before the format of the HDD you were still loading EFI from that, then switching to the SSD for the OS boot. Boot from the install flash drive, using the Repair mode to get a command prompt, the show us the output from diskpart with these commands:

    list disk

    sel disk 0

    list part

    Where the '0' above is the number shown for the SSD. That will tell us if an inplace Windows install will fix it.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Stef27
    Stef27 Member Posts: 23 New User

    I did what you tell me

  • Stef27
    Stef27 Member Posts: 23 New User