Looking for AIO 240mm Water Cooler for LGA 1700 Orion x pox-650 without changing backplate

Shinzamiel
Shinzamiel Member Posts: 1 New User
edited November 28 in Predator Desktops

is there any aio where you dont need to change the back plate , i have an orion x with an air cooler and to disassamble the board will be a really big hassle (proprietary itx mother board ) there is a model with water cooling which means i hope it should be possible

Answers

  • billsey
    billsey ACE Posts: 34,645 Trailblazer

    The Predator Orion X has a different case than the other Predator units, so I'm not sure just what will fit and what will not. At first glance the case looks like it might have similar clearances to the PO3 models, but we'd need measurements for both to be sure…

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Johnyknox2018
    Johnyknox2018 Member Posts: 3 New User

    More than likely you'll need to change the backplate. Most 240 water cooler kits include a backplate to screw the pump above the CPU. It's not hard unscrew the motherboard to lift up and access the backplate. You'll just need a good set of tools and an air heater blower to warm up the original backplate a little so it will peal of as it will be stuck on with double sided tape.

  • Refff
    Refff Member Posts: 1 New User

    Has anything come from this? I am interested in doing the same, the air cooler is running quite loud and the temperature of the CPU is sometimes alarmingly high.